Chamfer milling
Showing 31–60 of 96 results
-
Chamfer milling, Face milling, Indexable Tools, Milling Tools
F45ST 45° Screw Clamped Face Mills Carrying SEK/MT 12… Inserts
Chamfer milling, Face milling, Indexable Tools, Milling ToolsF45ST 45° Screw Clamped Face Mills Carrying SEK/MT 12… Inserts
- 45° screw clamped face mills carrying SEK/MT 12… inserts.
-
SE..1204 inserts are directly mounted on the cutter.
-
SE..12T3 optional thinner inserts are mounted on a seat – TSE 12T3-N.
- Cutting diameter maximum.
- Number of inserts.
SKU: F45ST 45° Screw Clamped Face Mills Carrying SEK/MT 12... Inserts -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
F45WG 45° Face Mills Carrying Octagonal ONHU/MU 0806… Inserts with 16 Cutting Edges
Chamfer milling, Face milling, Indexable Tools, Milling ToolsF45WG 45° Face Mills Carrying Octagonal ONHU/MU 0806… Inserts with 16 Cutting Edges
- Wedge lock 45° face mills, carrying Octagonal ONHU/MU0806… inserts with 16 cutting edges.
- Feature high table speed.
- Note: Recommended wedge clamping torque: 8.5-9.0 Nxm.
- Cutting diameter maximum.
- Number of inserts.
SKU: F45WG 45° Face Mills Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges -
Chamfer milling, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CM Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts
Chamfer milling, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CM Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts
- Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts.
- Fully effective cutter.
- Number of inserts.
SKU: FDN-CM Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts -
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FF SOF Multifunction Fast Feed Milling Cutter for Octagonal and Square Insert Contours with Various Entry Angles
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFF SOF Multifunction Fast Feed Milling Cutter for Octagonal and Square Insert Contours with Various Entry Angles
- Fast feed milling cutter, carrying square or octagonal double-sided inserts with 8/16 cutting edges.
- A- with ONMU 0505… insert.
- B- with S845 SNMU 1305… insert.
- C- with OXMT 0507R08-FF insert.
- Use only Torx Plus keys.
- Number of inserts.
- Master insert identification.
SKU: FF SOF Multifunction Fast Feed Milling Cutter for Octagonal and Square Insert Contours with Various Entry Angles -
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling Tools
HCM D12 Ball Nose Multifunction Endmills D=12 mm
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling ToolsHCM D12 Ball Nose Multifunction Endmills D=12 mm
- Ball Nose Multifunction Endmills D=12 mm.
-
The dimensions are for HBR inserts.
- Cutting diameter maximum.
- Refers to HBR inserts.
- Refers to HBR inserts.
- C-Cylindrical.
SKU: HCM D12 Ball Nose Multifunction Endmills D=12 mm -
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling Tools
HCM D16 Ball Nose Multifunction Endmills D=16 mm
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling ToolsHCM D16 Ball Nose Multifunction Endmills D=16 mm
- Ball Nose Multifunction Endmills D=16 mm.
- The dimensions are for HBR inserts.
- Cutting diameter maximum.
- Refers to HBR inserts.
- Refers to HBR inserts.
- C-Cylindrical.
SKU: HCM D16 Ball Nose Multifunction Endmills D=16 mm -
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling Tools
HCM D20 Ball Nose Multifunction Endmills D=20 mm
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling ToolsHCM D20 Ball Nose Multifunction Endmills D=20 mm
- Ball Nose Multifunction Endmills D=20 mm.
- The dimensions are for HBR inserts.
- Cutting diameter maximum.
- Refers to HBR inserts.
- Refers to HBR inserts.
- C-Cylindrical.
SKU: HCM D20 Ball Nose Multifunction Endmills D=20 mm -
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling Tools
HCM D25 Ball Nose Multifunction Endmills D=25 mm
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling ToolsHCM D25 Ball Nose Multifunction Endmills D=25 mm
- Ball Nose Multifunction Endmills D=25 mm.
- The dimensions are for HBR inserts.
- Cutting diameter maximum.
- Refers to HBR inserts.
- Refers to HBR inserts.
- C-Cylindrical.
SKU: HCM D25 Ball Nose Multifunction Endmills D=25 mm -
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling Tools
HCM-M Ball Nose Multifunction Endmills with FLEXFIT Threaded Adaptation
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling ToolsHCM-M Ball Nose Multifunction Endmills with FLEXFIT Threaded Adaptation
- Ball Nose Multifunction Endmills with FLEXFIT Threaded Adaptation.
- The dimensions are for HBR inserts.
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Apply appropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
SKU: HCM-M Ball Nose Multifunction Endmills with FLEXFIT Threaded Adaptation -
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling Tools
HCM-MM Ball Nose Multifunction Endmills with MULTI-MASTER Threaded Adaptation
Chamfer milling, Copy milling, contouring, Indexable Tools, Milling ToolsHCM-MM Ball Nose Multifunction Endmills with MULTI-MASTER Threaded Adaptation
- Ball Nose Multifunction Endmills with MULTI-MASTER Threaded Adaptation.
- The dimensions are for HBR inserts .
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- Cutting diameter maximum.
- Refers to HBR inserts.
- Refers to HBR inserts.
- Width across flats (wrench should be ordered separately).
SKU: HCM-MM Ball Nose Multifunction Endmills with MULTI-MASTER Threaded Adaptation -
Chamfer milling, Indexable Tools, Milling Tools
HM390 E10-80-07 Milling Tools
- Chamfering endmill with an adjustable cutting edge angle.
- Features a cartridge that can be rotated so that the insert’s cutting edge angle can be adjusted within 10 to 80 degrees.
- Number of inserts.
- W-Weldon.
- Master insert identification.
SKU: HM390 E10-80-07 Milling Tools -
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling Tools
HOE-R06 Endmills Carrying Octagonal, Square and Round Inserts
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling ToolsHOE-R06 Endmills Carrying Octagonal, Square and Round Inserts
- Face mills carrying octagonal or square or round inserts.
-
A – with OEM. 060405…\ OECR 06.. inserts .
-
B – with SECT/SEMT 1404… inserts .
-
C – with REM. 1505… round insert.
- Cutting diameter maximum.
- Maximum ramping angle.
- Number of inserts.
SKU: HOE-R06 Endmills Carrying Octagonal, Square and Round Inserts -
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling Tools
HOF-R06 Face Mills Carrying Octagonal or Square or Round Inserts
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling ToolsHOF-R06 Face Mills Carrying Octagonal or Square or Round Inserts
- Face mills carrying octagonal or square or round inserts.
-
A – with OEM. 060405…\ OECR 06.. inserts .
-
B – with SECT/SEMT 1404… inserts .
-
C – with REM. 1505… round insert.
- Cutting diameter maximum.
- Maximum ramping angle.
- Number of inserts.
SKU: HOF-R06 Face Mills Carrying Octagonal or Square or Round Inserts -
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
HOF-R07 Face Mills Carrying Octagonal Round and Fast Feed Segmented Radius Inserts
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsHOF-R07 Face Mills Carrying Octagonal Round and Fast Feed Segmented Radius Inserts
- Face mills carrying octagonal round and fast feed segmented radius inserts.
-
Helical interpolation is applicable up to and including 100 mm diameter.
- ap change according to insert.
- Cutting diameter maximum.
- Maximum ramping angle with OF..07.. inserts.
- Dimensions with RF.. 1905 round inserts.
- Dimensions with OFMW FF inserts.
- Number of inserts.
SKU: HOF-R07 Face Mills Carrying Octagonal Round and Fast Feed Segmented Radius Inserts -
-
-
-
-
Chamfer milling, Indexable Tools, Milling Tools
INDEXABLE MILLING Chamfer Milling MCA130 Weldon
- 4 cutting edges for positive and negative chamfering;
- 2 blade specifications, IC: 09/12.
- Suitable for the cutting of steel,stainless steel and heat-resisting alloy,mainly used for chamfer milling.
SKU: Chamfer Milling MCA130 Weldon -
Chamfer milling, Indexable Tools, Milling Tools
INDEXABLE MILLING Chamfer Milling MCA145 Weldon
- 4 cutting edges for positive and negative chamfering;
- 2 blade specifications, IC: 09/12.
- Suitable for the cutting of steel,stainless steel and heat-resisting alloy,mainly used for chamfer milling.
SKU: Chamfer Milling MCA145 Weldon -
Chamfer milling, Indexable Tools, Milling Tools
INDEXABLE MILLING Chamfer Milling MCA160 Weldon
- 4 cutting edges for positive and negative chamfering;
- 2 blade specifications, IC: 09/12.
- Suitable for the cutting of steel,stainless steel and heat-resisting alloy,mainly used for chamfer milling.
SKU: Chamfer Milling MCA160 Weldon -
Chamfer milling, Indexable Tools, Milling Tools
Interchangeable 2 Flute Solid Carbide Corner Rounding Milling Heads MM HR
Chamfer milling, Indexable Tools, Milling ToolsInterchangeable 2 Flute Solid Carbide Corner Rounding Milling Heads MM HR
- Interchageable 2 flute solid carbide corner rounding milling heads.
- Do not apply lubricant to the threaded connection.
- Cutting diameter maximum.
- Specially tailored radius range upon request.
- Number of flutes.
SKU: Interchangeable 2 Flute Solid Carbide Corner Rounding Milling Heads MM HR -
-
Chamfer milling, Indexable Tools, Milling Tools
Interchangeable 2 Flute Solid Carbide Heads MM HDF
- Interchangeable 2 flute solid carbide heads for upper and bottom chamfering.
- Do not apply lubricant to the threaded connection.
- Clamping keys should be ordered separately
- Cutting diameter maximum.
- Number of flutes.
- Optional, should be ordered separately.
SKU: Interchangeable 2 Flute Solid Carbide Heads MM HDF -
Chamfer milling, Indexable Tools, Milling Tools
Interchangeable 3 Flute Solid Carbide Heads MM EDF
- Interchangeable 3 flute solid carbide heads for upper and bottom chamfering.
- Suitable for pecking applications.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
SKU: Interchangeable 3 Flute Solid Carbide Heads MM EDF -
Chamfer milling, Indexable Tools, Milling Tools
Interchangeable 4 Flute Solid Carbide Corner Rounding Milling Heads MM ER
Chamfer milling, Indexable Tools, Milling ToolsInterchangeable 4 Flute Solid Carbide Corner Rounding Milling Heads MM ER
- Interchageable 4 flute solid carbide corner rounding milling heads.
- Do not apply lubricant to the threaded connection.
- Specially tailored radius range upon request..
- Cutting diameter maximum.
- Number of flutes.
SKU: Interchangeable 4 Flute Solid Carbide Corner Rounding Milling Heads MM ER -
Chamfer milling, Indexable Tools, Milling Tools
Interchangeable 6 Flute Solid Carbide, Double-Sided Corner Rounding Milling Heads MM GRIT 28P-DR
Chamfer milling, Indexable Tools, Milling ToolsInterchangeable 6 Flute Solid Carbide, Double-Sided Corner Rounding Milling Heads MM GRIT 28P-DR
- Interchangeable 6 Flute Solid Carbide, Double-Sided Corner Rounding Milling Heads.
- Do not apply lubricant to the threaded connection.
- Cutting diameter maximum.
- Number of flutes.
SKU: Interchangeable 6 Flute Solid Carbide, Double-Sided Corner Rounding Milling Heads MM GRIT 28P-DR -
Chamfer milling, Indexable Tools, Milling Tools
Interchangeable Solid Carbide Heads MM ECF
- MULTI-MASTER interchangeable solid carbide heads for chamfering and countersinking.
- Do not apply lubricant to the threaded connection.
- Cutting diameter maximum.
- Number of flutes.
SKU: Interchangeable Solid Carbide Heads MM ECF