Boring and Reaming Tools
Showing 181–210 of 258 results
-
Boring and Reaming Tools, Fine boring tools, Indexable Tools
KIT BHF MB-BL Contains a Balanceable Fine Boring Head and Various Boring Tools and Inserts
Boring and Reaming Tools, Fine boring tools, Indexable ToolsKIT BHF MB-BL Contains a Balanceable Fine Boring Head and Various Boring Tools and Inserts
- Contains a Balanceable Fine Boring Head and Various Boring Tools and Inserts.
SKU: KIT BHF MB-BL Contains a Balanceable Fine Boring Head and Various Boring Tools and Inserts -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
KIT BHFH-MB Contains Adapters, Extensions and Boring Bars for 36 to 400 mm Boring Range
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable ToolsKIT BHFH-MB Contains Adapters, Extensions and Boring Bars for 36 to 400 mm Boring Range
- Contains Adapters, Extensions and Boring Bars for 36 to 400 mm Boring Range.
SKU: KIT BHFH-MB Contains Adapters, Extensions and Boring Bars for 36 to 400 mm Boring Range -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Large Diameter Finish Boring Tool GST-FB
Boring and Reaming Tools, Fine boring tools, Indexable ToolsLarge Diameter Finish Boring Tool GST-FB
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Large Diameter Finish Boring Tool GST-FB -
Back Boring, Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Location Spindle
- The boring tool could be connected directly to the spindle of the machine without any tool holders, if the hole diameter is larger than Φ610 mm, but positioning spindle must be used.
SKU: Location Spindle -
Boring Holder & ACCESSORIES, Tapping heads
MEGA SYNCHRO TAPPING HOLDER PAT. Tapping range: M2 – M36
-
Improves thread quality and tap life by reducing thrust loads caused by synchronization errors up to 90%.
-
Functions smoothly under high cutting torque of large diameter tapping.
SKU: MEGA SYNCHRO TAPPING HOLDER PAT. Tapping range: M2 - M36 -
-
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Micro -boring Bar SFB
- Quickly Setup, Locate & Orient Micro Boring Bars Thru-Coolant Capabilty down to 0.5 mm.
- Multi-facted Boring Bar neck reduces harmonic vibration, resulting in Better Surface Finish & Longer Tool Life NO SPECIAL WRENCHES REQUIRED.
- Holders Available for Any Swiss Machine.
SKU: Micro -boring Bar SFB -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Micro-boring bar GBH2084
- Quickly Setup, Locate & Orient Micro Boring Bars Thru-Coolant Capabilty down to 0.5 mm.
- Multi-facted Boring Bar neck reduces harmonic vibration, resulting in Better Surface Finish & Longer Tool Life NO SPECIAL WRENCHES REQUIRED.
- Holders Available for Any Swiss Machine.
SKU: Micro-boring bar GBH2084 -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Micro-boring Bar GBJ16
- Quickly Setup, Locate & Orient Micro Boring Bars Thru-Coolant Capabilty down to 0.5 mm.
- Multi-facted Boring Bar neck reduces harmonic vibration, resulting in Better Surface Finish & Longer Tool Life NO SPECIAL WRENCHES REQUIRED.
- Holders Available for Any Swiss Machine.
SKU: Micro-boring Bar GBJ16 -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Micro-boring head GBH2084
• This boring head has an excellent wide base design and high quality ensuring long life and rigidity even when it is used in an offset position.
• The screw is hardened and ground which guarantees long life and trouble free use.
• An ideal product for mill or jig bore operations.
• interchangeable shanks of the heads make it adaptable for use on different machines.SKU: Micro-boring head GBH2084 -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Micro-boring Head GBJ16
• This boring head has an excellent wide base design and high quality ensuring long life and rigidity even when it is used in an offset position.
• The screw is hardened and ground which guarantees long life and trouble free use.
• An ideal product for mill or jig bore operations.
• interchangeable shanks of the heads make it adaptable for use on different machines.SKU: Micro-boring Head GBJ16 -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Micro-boring Tool Kit GBH2084
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Micro-boring Tool Kit GBH2084 -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Micro-boring Tool Kit GBJ16
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Micro-boring Tool Kit GBJ16 -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Micro-boring Tool SFB
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Micro-boring Tool SFB -
-
-
Rough boring tools
MW BORING HEAD PAT. (for roughing)
-
Achieves high efficiency small diameter rough boring with 2 inserts.
-
Designed with versatile ø20 cylindrical shank.
-
ROUGH BORING HEAD Pursuit of rigidity
-
Secure contact using a single wrench.
-
Supports various applications from rough to finish boring with abundant heads and accessories.
-
Safe structure at high torque
-
Rapid adaptation to special tools
SKU: MW BORING HEAD PAT. (for roughing) -
-
Boring and Reaming Tools, Fine boring tools, Indexable Tools
MX+ Cylindrical Adaptor MXA
- Boring cutter is a kind of boring cutter, generally with round handle. There are also large work-pieces with square cutter bar.
- The most commonly used occasions are inner hole processing, reaming, profiling, etc. A tool that has one or two cutting parts and is used for roughing, semi finishing, or finishing an existing hole.
- Boring cutter can be used on boring machine, lathe or milling machine.
SKU: MX+ Cylindrical Adaptor MXA -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
MX+EXT Adaptor MXE
- Boring cutter is a kind of boring cutter, generally with round handle. There are also large work-pieces with square cutter bar.
- The most commonly used occasions are inner hole processing, reaming, profiling, etc. A tool that has one or two cutting parts and is used for roughing, semi finishing, or finishing an existing hole.
- Boring cutter can be used on boring machine, lathe or milling machine.
SKU: MX+EXT Adaptor MXE -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
MXB MX Extension V-Max Drill
- Boring cutter is a kind of boring cutter, generally with round handle. There are also large work-pieces with square cutter bar.
- The most commonly used occasions are inner hole processing, reaming, profiling, etc. A tool that has one or two cutting parts and is used for roughing, semi finishing, or finishing an existing hole.
- Boring cutter can be used on boring machine, lathe or milling machine.
SKU: MXB MX Extension V-Max Drill -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
MXR MX Reducer V-Max Drill
- Boring cutter is a kind of boring cutter, generally with round handle. There are also large work-pieces with square cutter bar.
- The most commonly used occasions are inner hole processing, reaming, profiling, etc. A tool that has one or two cutting parts and is used for roughing, semi finishing, or finishing an existing hole.
- Boring cutter can be used on boring machine, lathe or milling machine.
SKU: MXR MX Reducer V-Max Drill -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
NBF Mini Precision Boring Tool with Type E Connection
Boring and Reaming Tools, Fine boring tools, Indexable ToolsNBF Mini Precision Boring Tool with Type E Connection
- It can be micro adjusted single tooth. 1 DIV =0.01 mm in diameter.
- The boring range is Φ20-Φ212.
- Hollow short taper modular connection type E. Snail cartridge is for the body.
SKU: NBF Mini Precision Boring Tool with Type E Connection -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
NBF Mini Precision Boring Tools with Type E Connection
Boring and Reaming Tools, Fine boring tools, Indexable ToolsNBF Mini Precision Boring Tools with Type E Connection
- It is suitable for the BR rough boring Mini boring tool has a highly precision adjusted mechanism, 1 DIV=0.001 mm in diameter, and the boring range is Φ2-Φ50.
- High rigidity thanks of hollow short taper combination type E connection. Boring bars for the body.
SKU: NBF Mini Precision Boring Tools with Type E Connection -
Back Boring, Boring and Reaming Tools, Fine boring tools, Indexable Tools
NBF Precision Boring Tool for Back Boring with Type E Connection
Back Boring, Boring and Reaming Tools, Fine boring tools, Indexable ToolsNBF Precision Boring Tool for Back Boring with Type E Connection
- Please assemble the cartridge as its reverse direction, which is for back boring, and the back boring range is Φ30-Φ212 and also with the same precision as the ordinary boring tool.
- The tool should be rotated by the reserve direction when machining and the hole diameter D should meet the requirement of”D≥(Dc+D1)/2+1″.
SKU: NBF Precision Boring Tool for Back Boring with Type E Connection