Heat-resistant Alloy and Titanium Alloy (S)
Showing 841–870 of 1027 results
-
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
SD FM Interchangeable Solid Carbide Face Milling Heads
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsSD FM Interchangeable Solid Carbide Face Milling Heads
- Interchangeable solid carbide face milling heads.
- Number of flutes.
- High tooth density, enabling very fast table feed.
- Can be used with all MULTI-MASTER adaptation options.
- Excellent surface finish.
- Less expensive when compared to solid carbide endmills.
SKU: SD FM Interchangeable Solid Carbide Face Milling Heads -
Indexable Tools, Thread milling, THREADING TOOLS
SD TRD-M-SP Interchangeable Solid Carbide Heads for 60° Partial Profile Thread Milling
Indexable Tools, Thread milling, THREADING TOOLSSD TRD-M-SP Interchangeable Solid Carbide Heads for 60° Partial Profile Thread Milling
- Interchangeable Solid Carbide Heads for 60° Partial Profile Thread Milling.
- Minimum diameter for external threading.
- VP60=60° partial thread form.
- Thread pitch minimum (mm).
- Thread pitch maximum (mm).
- Threads per inch minimum.
- Threads per inch maximum.
SKU: SD TRD-M-SP Interchangeable Solid Carbide Heads for 60° Partial Profile Thread Milling -
Indexable Tools, Thread milling, THREADING TOOLS
SD TRD-W-SP Interchangeable Solid Carbide Heads for 55° Partial Profile Thread Milling
Indexable Tools, Thread milling, THREADING TOOLSSD TRD-W-SP Interchangeable Solid Carbide Heads for 55° Partial Profile Thread Milling
- Interchangeable Solid Carbide Heads for 55° Partial Profile Thread Milling.
- Minimum diameter for external threading.
- VP55=55° partial thread forms.
- Threads per inch minimum.
- Threads per inch maximum.
SKU: SD TRD-W-SP Interchangeable Solid Carbide Heads for 55° Partial Profile Thread Milling -
Gear milling, Indexable Tools, Milling Tools
SD-M-N-SP Interchangeable Solid Carbide Heads for Involute Gear Profile Milling According to DIN 3972 Basic Profile ||
Gear milling, Indexable Tools, Milling ToolsSD-M-N-SP Interchangeable Solid Carbide Heads for Involute Gear Profile Milling According to DIN 3972 Basic Profile ||
- Interchangeable Solid Carbide Heads for Involute Gear Profile Milling According to DIN 3972 Basic Profile ||.
- Tightening torque 4 Nxm.
- Gear teeth range.
- Number of cutting edges.
SKU: SD-M-N-SP Interchangeable Solid Carbide Heads for Involute Gear Profile Milling According to DIN 3972 Basic Profile || -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Tool Holders
SD-SP Interchangeable Solid Carbide T-Slot Milling Heads
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Tool HoldersSD-SP Interchangeable Solid Carbide T-Slot Milling Heads
- Interchangeable Solid Carbide T-Slot Milling Heads.
- Maximum feed: 0.1 mm/tooth.
- Cutting depth maximum.
- Number of flutes.
SKU: SD-SP Interchangeable Solid Carbide T-Slot Milling Heads -
Indexable Tools, Milling Inserts, Milling Tools
SDHW/T 100408 Milling Inserts
- Square inserts for machining titanium, high temperature alloys and stainless steel carried on extended flute cutters.
- First choice for machining stainless steel.
- First choice for machining titanium.
- Chip splitting cutting edge.
SKU: SDHW/T 100408 Milling Inserts -
-
Indexable Tools, Milling Inserts, Milling Tools
Selection of inserts for Face milling tools FMA01 and FMA02 SEET12T3 SEET18T6
Indexable Tools, Milling Inserts, Milling ToolsSelection of inserts for Face milling tools FMA01 and FMA02 SEET12T3 SEET18T6
- Diameter range Ø50-Ø315.
- Large rake angle makes cutting easier and faster.
- Wide applications can be achieved by using available inserts with different chipbreakers.
- Adopting inserts with wiper can improve surface quality.
- Diameter range Ø50-Ø125.
- Large rake angle makes cutting easier and faster.
- Wide applications can be achieved by using available inserts with different chipbreakers.
- Coarse and differential pitch, reducing vibration.
SKU: Selection of inserts for Face milling tools FMA01 and FMA02 -
-
External grooving, Indexable Tools, Internal grooving, Parting And Grooving Tools, Parting off tools
Single-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel
External grooving, Indexable Tools, Internal grooving, Parting And Grooving Tools, Parting off toolsSingle-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel
- Single-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel.
- Cutting width tolerance (+/-).
SKU: Single-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
SNGN-Ceramic Square Double-Sided Ceramic Inserts with a Flat Rake for Machining Cast Iron, Hardened Steel and Super Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSSNGN-Ceramic Square Double-Sided Ceramic Inserts with a Flat Rake for Machining Cast Iron, Hardened Steel and Super Alloys
- Square Double-Sided Ceramic Inserts with a Flat Rake for Machining Cast Iron, Hardened Steel and Super Alloys.
SKU: SNGN-Ceramic Square Double-Sided Ceramic Inserts with a Flat Rake for Machining Cast Iron, Hardened Steel and Super Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
SNMG-EM-M/R Double-Sided Square Inserts for Medium Machining on High Temperature Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSSNMG-EM-M/R Double-Sided Square Inserts for Medium Machining on High Temperature Alloys
- Double-Sided Square Inserts for Medium Machining on High Temperature Alloys.
SKU: SNMG-EM-M/R Double-Sided Square Inserts for Medium Machining on High Temperature Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
SNMG-F3S Double-Sided 90° Square Inserts for Titanium and Heat Resistant Materials. Used for Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSSNMG-F3S Double-Sided 90° Square Inserts for Titanium and Heat Resistant Materials. Used for Finishing Applications
- Double-sided 90° rhombic inserts for titanium and heat resistant materials, for finishing applications.
SKU: SNMG-F3S Double-Sided 90° Square Inserts for Titanium and Heat Resistant Materials. Used for Finishing Applications -
Indexable Tools, Turning Inserts, TURNING TOOLS
SNMG-PP Double-Sided Square Inserts for Machining Very Ductile Materials at Medium Cutting Conditions
Indexable Tools, Turning Inserts, TURNING TOOLSSNMG-PP Double-Sided Square Inserts for Machining Very Ductile Materials at Medium Cutting Conditions
- Double-Sided Square Inserts for Machining Very Ductile Materials at Medium Cutting Conditions.
SKU: SNMG-PP Double-Sided Square Inserts for Machining Very Ductile Materials at Medium Cutting Conditions