Heat-resistant Alloy and Titanium Alloy (S)
Showing 811–840 of 1027 results
-
DRILLING, Solid round tools, Stub (2D - 3D)
SCD-AP3N (3xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD
DRILLING, Solid round tools, Stub (2D - 3D)SCD-AP3N (3xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD
- DIN 6537 Solid Carbide Drills without Coolant Holes, Drilling Depth 3xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP3N (3xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD -
DRILLING, JOBBER(4D-7D), Solid round tools
SCD-AP4 (4xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 4xD
DRILLING, JOBBER(4D-7D), Solid round toolsSCD-AP4 (4xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 4xD
- DIN 6537 solid carbide drills without coolant holes, drilling depth 4xD.
- Range of 0.8-2.9 mm in length to diameter ratio of 4D & 6D.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP4 (4xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 4xD -
DRILLING, JOBBER(4D-7D), Solid round tools
SCD-AP5 (5xD) (continued) Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD
DRILLING, JOBBER(4D-7D), Solid round toolsSCD-AP5 (5xD) (continued) Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD
- Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP5 (5xD) (continued) Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD -
DRILLING, JOBBER(4D-7D), Solid round tools
SCD-AP5 (5xD) Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD
DRILLING, JOBBER(4D-7D), Solid round toolsSCD-AP5 (5xD) Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD
- Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP5 (5xD) Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD -
DRILLING, JOBBER(4D-7D), Solid round tools
SCD-AP5N (5xD) (continued) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD
DRILLING, JOBBER(4D-7D), Solid round toolsSCD-AP5N (5xD) (continued) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD
- DIN 6537 Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP5N (5xD) (continued) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD -
DRILLING, JOBBER(4D-7D), Solid round tools
SCD-AP5N (5xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD
DRILLING, JOBBER(4D-7D), Solid round toolsSCD-AP5N (5xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD
- DIN 6537 Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP5N (5xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD -
DRILLING, JOBBER(4D-7D), Solid round tools
SCD-AP6 (6xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 6xD
DRILLING, JOBBER(4D-7D), Solid round toolsSCD-AP6 (6xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 6xD
- DIN 6537 solid carbide drills without coolant holes, drilling depth 6xD.
- Range of 0.8-2.9 mm in length to diameter ratio of 4D & 6D.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP6 (6xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 6xD -
Indexable Tools, Turning Inserts, TURNING TOOLS
SCGT-AS Square Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSSCGT-AS Square Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
- Square inserts with a 7° positive flank, very positive rake angle and sharp cutting edge for machining aluminum.
SKU: SCGT-AS Square Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
SCMT-14 Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSSCMT-14 Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
- Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys.
SKU: SCMT-14 Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
SCMT-19 Square Inserts with a 7° Positive Flank for Semi-Roughing at Medium to High Feeds
Indexable Tools, Turning Inserts, TURNING TOOLSSCMT-19 Square Inserts with a 7° Positive Flank for Semi-Roughing at Medium to High Feeds
- Square Inserts with a 7° Positive Flank for Semi-Roughing at Medium to High Feeds.
SKU: SCMT-19 Square Inserts with a 7° Positive Flank for Semi-Roughing at Medium to High Feeds -
Indexable Tools, Turning Inserts, TURNING TOOLS
SCMT-F3P Square Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel
Indexable Tools, Turning Inserts, TURNING TOOLSSCMT-F3P Square Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel
- Square Positive Flank Inserts, for Semi-Finishing and Finish Turning of Steel.
SKU: SCMT-F3P Square Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
SCMT-SM Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSSCMT-SM Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
- Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys.
SKU: SCMT-SM Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys