(1) Used for standard thread size
DRILLING, JOBBER（4D-7D）, Solid round tools
SCD-AP5 (5xD) Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD
Availability:
200 in stock
- Solid Carbide Drills without Coolant Holes, Drilling Depth 5xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “SCD-AP5 (5xD) Solid Carbide Drills Without Coolant Holes, Drilling Depth 5xD”
Related products
-
-
Solid round tools, Solid Milling, Roughing
SOLID CARBIDE ENDMILLS UPN210-S4 4 Flute Square End, With Roughing Geometry
Solid round tools, Solid Milling, RoughingSOLID CARBIDE ENDMILLS UPN210-S4 4 Flute Square End, With Roughing Geometry
● Suitable for roughing machining of steels﹠cast iron(≤48HRC).
● Cutting edge with Special chip-breaking design, suitable for groove
and side wall roughing.SKU: UPN210-S4 4 Flute Square End, with Roughing Geometry -
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS US300-SS4 4 Flute, Stub Length
● Suitable for rough milling, semi-finishing and finishing of stainless
steel(<280HB).
● Design for the small depth/large width in face milling, large depth/
small width in side milling, less than 0.3D inshallow slotting.SKU: US300-SS4 4 Flute, Stub Length -
Solid round tools, Solid Milling, Corner Radius, Square
SOLID CARBIDE ENDMILLS SP210-R4 4 Flute Comer Radius, With Variable Helix
Solid round tools, Solid Milling, Corner Radius, SquareSOLID CARBIDE ENDMILLS SP210-R4 4 Flute Comer Radius, With Variable Helix
● Suitable for high efficiency efficient machining of steels
﹠cast iron (≤48HRC).
● Variable helix angle and unequal flute pitch with
excellent anti-vibration capacity.
● Applicable to high efficiency efficient machining of large
cutting depth（ap）, large cutting width（ap）(Machine
with good rigidity).SKU: SP210-R4 4 Flute Comer Radius, with Variable Helix
There are no reviews yet.