Heat-resistant Alloy and Titanium Alloy (S)
Showing 781–810 of 1027 results
-
Indexable Tools, Turning Inserts, TURNING TOOLS
RPGN-Ceramic Round Ceramic Inserts for Machining Nickel Based Alloys and Hardened Steel
Indexable Tools, Turning Inserts, TURNING TOOLSRPGN-Ceramic Round Ceramic Inserts for Machining Nickel Based Alloys and Hardened Steel
- Round Ceramic Inserts for Machining Nickel Based Alloys and Hardened Steel.
SKU: RPGN-Ceramic Round Ceramic Inserts for Machining Nickel Based Alloys and Hardened Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
RPGX-Ceramic Round Ceramic Inserts for Machining Nickel Based Alloys and Hardened Steel
Indexable Tools, Turning Inserts, TURNING TOOLSRPGX-Ceramic Round Ceramic Inserts for Machining Nickel Based Alloys and Hardened Steel
- Round Ceramic Inserts for Machining Nickel Based Alloys and Hardened Steel.
SKU: RPGX-Ceramic Round Ceramic Inserts for Machining Nickel Based Alloys and Hardened Steel -
-
-
Indexable Tools, Milling Inserts, Milling Tools
S845 SNHU 1305AN-N-W Milling Inserts
- Double-sided wiper inserts with 4 cutting edgese (HELIDO 845 line).
- When a wiper insert is being used, recommended ap=0.8-3.0 mm, fz=0.1-0.2 mm/t.
- To be used with S845 SNMU/SNHU 13.. inserts.
SKU: S845 SNHU 1305AN-N-W Milling Inserts -
-
-
-
Indexable Tools, Milling Inserts, Milling Tools
S845 SXMU/SXCU-16 Milling Inserts
- HELIDO, square, thick inserts with 8 helical right-hand cutting edges, providing a very economical 45° milling solution.
- When a wiper insert is being used, recommended ap=0.8-3.0 mm, fz=0.1-0.25 mm/t.
SKU: S845 SXMU/SXCU-16 Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
S865 SNMU 1305ZNTR Milling Inserts
- Square, double-sided inserts with 8 cutting edges. Used on 65° face mills (HELIDO 865 line).
- Recommended ap max on steel applications with coarse pitch cutters and on cast iron with fine pitch cutters may be increased to 8 mm.
SKU: S865 SNMU 1305ZNTR Milling Inserts -
Indexable Tools, Turning Inserts, TURNING TOOLS
SC45MT-SM Single-Sided Square Inserts for Finishing Applications (CHAMELEON Multifunction Pocket System)
Indexable Tools, Turning Inserts, TURNING TOOLSSC45MT-SM Single-Sided Square Inserts for Finishing Applications (CHAMELEON Multifunction Pocket System)
- Single-Sided Square Inserts for Finishing Applications (CHAMELEON Multifunction Pocket System).
SKU: SC45MT-SM Single-Sided Square Inserts for Finishing Applications (CHAMELEON Multifunction Pocket System) -
Broaching tool, Gear cutter and Broaching tool, Indexable Tools
SCB (light fit) DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines
Broaching tool, Gear cutter and Broaching tool, Indexable ToolsSCB (light fit) DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines
- DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines.
SKU: SCB (light fit) DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines -
Broaching tool, Gear cutter and Broaching tool, Indexable Tools
SCB (tight fit) DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines
Broaching tool, Gear cutter and Broaching tool, Indexable ToolsSCB (tight fit) DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines
- DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines.
SKU: SCB (tight fit) DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines -
Broaching tool, Gear cutter and Broaching tool, Indexable Tools
SCB DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines
Broaching tool, Gear cutter and Broaching tool, Indexable ToolsSCB DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines
- DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines.
SKU: SCB DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines -
DRILLING, Solid round tools, Taper (8D - 30D)
SCD-ACG8 (8xD) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD
DRILLING, Solid round tools, Taper (8D - 30D)SCD-ACG8 (8xD) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD
- DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACG8 (8xD) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD -
DRILLING, Solid round tools, Taper (8D - 30D)
SCD-ACP-CS (20xD) Solid Carbide Drills with Coolant Holes for Automotive Crankshaft Applications, Drilling Depth 20-22xD
DRILLING, Solid round tools, Taper (8D - 30D)SCD-ACP-CS (20xD) Solid Carbide Drills with Coolant Holes for Automotive Crankshaft Applications, Drilling Depth 20-22xD
- Solid carbide drills with coolant holes for automotive crankshaft applications, drilling depth 20-22xD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP-CS (20xD) Solid Carbide Drills with Coolant Holes for Automotive Crankshaft Applications, Drilling Depth 20-22xD -
DRILLING, Solid round tools, Taper (8D - 30D)
SCD-ACP20 (20xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 20xD
DRILLING, Solid round tools, Taper (8D - 30D)SCD-ACP20 (20xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 20xD
- Solid Carbide Drills with Coolant Holes, Drilling Depth 20xD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP20 (20xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 20xD -
DRILLING, Solid round tools, Stub (2D - 3D)
SCD-ACP3N (3XD) (continued) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD
DRILLING, Solid round tools, Stub (2D - 3D)SCD-ACP3N (3XD) (continued) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD
- DIN 6537 solid carbide drills with coolant holes, drilling depth 3xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP3N (3XD) (continued) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD -
DRILLING, Solid round tools, Stub (2D - 3D)
SCD-ACP3N (3XD) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD
DRILLING, Solid round tools, Stub (2D - 3D)SCD-ACP3N (3XD) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD
- DIN 6537 solid carbide drills with coolant holes, drilling depth 3xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP3N (3XD) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD -
DRILLING, JOBBER（4D-7D）, Solid round tools
SCD-ACP5 (5xD) (continued) Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
DRILLING, JOBBER（4D-7D）, Solid round toolsSCD-ACP5 (5xD) (continued) Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
- Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP5 (5xD) (continued) Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD -
DRILLING, JOBBER（4D-7D）, Solid round tools
SCD-ACP5 (5xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
DRILLING, JOBBER（4D-7D）, Solid round toolsSCD-ACP5 (5xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
- Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP5 (5xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD -
DRILLING, JOBBER（4D-7D）, Solid round tools
SCD-ACP5N (5xD) (continued) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
DRILLING, JOBBER（4D-7D）, Solid round toolsSCD-ACP5N (5xD) (continued) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
- DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP5N (5xD) (continued) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD -
DRILLING, Indexable Tools, JOBBER（4D-7D）, Solid round tools
SCD-ACP5N (5xD) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
DRILLING, Indexable Tools, JOBBER（4D-7D）, Solid round toolsSCD-ACP5N (5xD) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
- DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP5N (5xD) DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD -
DRILLING, Solid round tools, Taper (8D - 30D)
SCD-ACP8 (8xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD
DRILLING, Solid round tools, Taper (8D - 30D)SCD-ACP8 (8xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD
- Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP8 (8xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD -
DRILLING, Solid round tools, Taper (8D - 30D)
SCD-ACP8N (8xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD
DRILLING, Solid round tools, Taper (8D - 30D)SCD-ACP8N (8xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD
- Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-ACP8N (8xD) Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD -
DRILLING, Solid round tools, Stub (2D - 3D)
SCD-AP3 (3xD) (continued) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD
DRILLING, Solid round tools, Stub (2D - 3D)SCD-AP3 (3xD) (continued) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD
- DIN 6537 solid carbide drills without coolant holes, drilling depth 3xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP3 (3xD) (continued) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD -
DRILLING, Solid round tools, Stub (2D - 3D)
SCD-AP3 (3xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD
DRILLING, Solid round tools, Stub (2D - 3D)SCD-AP3 (3xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD
- DIN 6537 solid carbide drills without coolant holes, drilling depth 3xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP3 (3xD) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD -
DRILLING, Solid round tools, Stub (2D - 3D)
SCD-AP3N (3xD) (continued) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD
DRILLING, Solid round tools, Stub (2D - 3D)SCD-AP3N (3xD) (continued) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD
- DIN 6537 Solid Carbide Drills without Coolant Holes, Drilling Depth 3xD.
- Range of 3-20 mm in length to diameter ratio of 3xD, 5xD, 8XD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
SKU: SCD-AP3N (3xD) (continued) DIN 6537 Solid Carbide Drills Without Coolant Holes, Drilling Depth 3xD
