Stainless Steel (M)
Showing 151–180 of 1235 results
-
Indexable Tools, Turning Inserts, TURNING TOOLS
DCGT-AS 55° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSDCGT-AS 55° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
- 55° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum.
SKU: DCGT-AS 55° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-14 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-14 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
- 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys.
SKU: DCMT-14 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-CERMET Single-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-CERMET Single-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
- Single-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications.
SKU: DCMT-CERMET Single-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-F3P 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-F3P 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel
- 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel.
SKU: DCMT-F3P 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-F3P-SL 55° Rhombic Inserts with a Positive Flank with a Locating Bottom Ridge for Semi-Finishing and Finishing on Steel
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-F3P-SL 55° Rhombic Inserts with a Positive Flank with a Locating Bottom Ridge for Semi-Finishing and Finishing on Steel
- 55° Rhombic Inserts with a Positive Flank with a Locating Bottom Ridge for Semi-Finishing and Finishing on Steel.
SKU: DCMT-F3P-SL 55° Rhombic Inserts with a Positive Flank with a Locating Bottom Ridge for Semi-Finishing and Finishing on Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-M3M 55° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-M3M 55° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel
- 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Machining Stainless and Low Carbon Steel.
SKU: DCMT-M3M 55° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-M3M-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Machining Stainless and Low Carbon Steel
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-M3M-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Machining Stainless and Low Carbon Steel
- 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Machining Stainless and Low Carbon Steel.
SKU: DCMT-M3M-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Machining Stainless and Low Carbon Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-PF 55° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-PF 55° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
- 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys.
SKU: DCMT-PF 55° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-PF-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-PF-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys
- 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys.
SKU: DCMT-PF-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-SM-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-SM-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys
- 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys.
SKU: DCMT-SM-SL 55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT/DCGT 55° Rhombic Inserts with a 7° Positive Clearance for Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT/DCGT 55° Rhombic Inserts with a 7° Positive Clearance for Finishing Applications
- 55° Rhombic Inserts with a 7° Positive Clearance for Finishing Applications.
SKU: DCMT/DCGT 55° Rhombic Inserts with a 7° Positive Clearance for Finishing Applications -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT/DCGT-SM 55° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT/DCGT-SM 55° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
- 55° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys.
SKU: DCMT/DCGT-SM 55° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-C-XL Extra Long Parting and Grooving Inserts for Parting Bars Up to 65 mm Diameters, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-C-XL Extra Long Parting and Grooving Inserts for Parting Bars Up to 65 mm Diameters, Hard Materials and Tough Applications
- Extra Long Parting and Grooving Inserts for Parting Bars Up to 65 mm Diameters, Hard Materials and Tough Applications.
SKU: DGN-C-XL Extra Long Parting and Grooving Inserts for Parting Bars Up to 65 mm Diameters, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-J-XL Extra Long Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-J-XL Extra Long Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Extra Long Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
SKU: DGN-J-XL Extra Long Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel
- Double-Sided Inserts for Parting and Grooving Stainless Steel.
- The LFT chipformer features basically the same design as the LF chipformer, except that it is reinforced by a T-land to improve its durability in interrupted-cut or on hard materials applications.
- It can be applied at higher feeds than the LF chipformer.
SKU: DGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
- Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds.
SKU: DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
- Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds.
SKU: DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-WP Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-WP Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish
- Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish.
SKU: DGN-WP Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
- Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
SKU: DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR-WP Double-Sided Parting Inserts with a Wiper Design for High Flatness and Surface Finish
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR-WP Double-Sided Parting Inserts with a Wiper Design for High Flatness and Surface Finish
- Double-Sided Parting Inserts with a Wiper Design for High Flatness and Surface Finish.
SKU: DGR-WP Double-Sided Parting Inserts with a Wiper Design for High Flatness and Surface Finish -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts
- Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts.
SKU: DGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
- Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: DGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-C-XL Extra Long Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-C-XL Extra Long Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
- Extra Long Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications.
SKU: DGR/L-C-XL Extra Long Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-J-XL Extra Long Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-J-XL Extra Long Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
- Extra Long Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts.
SKU: DGR/L-J-XL Extra Long Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
SKU: DGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Indexable Tools, Turning Inserts, TURNING TOOLS
DNGP-F2M Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing on Stainless Steel
Indexable Tools, Turning Inserts, TURNING TOOLSDNGP-F2M Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing on Stainless Steel
- Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing on Stainless Steel.
SKU: DNGP-F2M Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing on Stainless Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMG-CERMET Double-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSDNMG-CERMET Double-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
- Double-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications.
SKU: DNMG-CERMET Double-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications