1) Check according to specific insert data
(2) Check according to specific insert data
(3) Minimum overhang
(4) Maximum overhang
(5) Minimum cutting width
(6) Maximum cutting width
(7) 0 – Without coolant supply, 1 – With coolant supply
(8) DMIN=11 mm for GIQR 11, DMIN=15 mm for GIQR 11-15
(9) CDX=2.30 for GIQR 11, CDX=6.3 for GIQR 11-15
Indexable Tools, Internal grooving, Parting And Grooving Tools
MGCH Solid Carbide Bars for Internal Grooving, Turning and Threading, Dmin 8 mm
Availability:
200 in stock
- Solid Carbide Bars for Internal Grooving, Turning and Threading, DMIN 8 mm.
- The same tool applies on right and left machining.
Based on 0 reviews
Be the first to review “MGCH Solid Carbide Bars for Internal Grooving, Turning and Threading, Dmin 8 mm”
You may also like…
-
Indexable Tools, TURNING TOOLS, External turning holders
PICCO/MG PCO (holder) Holders for PICCO Inserts and Small Diameter Boring Bars
Indexable Tools, TURNING TOOLS, External turning holdersPICCO/MG PCO (holder) Holders for PICCO Inserts and Small Diameter Boring Bars
- Holders for PICCO Inserts and Small Diameter Boring Bars.
- Holders are suitable for right- and left-hand inserts, and boring bars.
SKU: PICCO/MG PCO (holder) Holders for PICCO Inserts and Small Diameter Boring Bars -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
GIQR/L 11-R Precision Ground Single-Ended Full Radius Inserts for Internal Grooving and Profiling
Indexable Tools, Parting And Grooving Tools, Grooving InsertsGIQR/L 11-R Precision Ground Single-Ended Full Radius Inserts for Internal Grooving and Profiling
- Precision Ground Single-Ended Full Radius Inserts for Internal Grooving and Profiling.
SKU: GIQR/L 11-R Precision Ground Single-Ended Full Radius Inserts for Internal Grooving and Profiling -
Indexable Tools, THREADING TOOLS, Threading Inserts
GIQR/L-WT Internal Inserts with Whitworth Partial Profile for Threading in 8 mm and Larger Holes
Indexable Tools, THREADING TOOLS, Threading InsertsGIQR/L-WT Internal Inserts with Whitworth Partial Profile for Threading in 8 mm and Larger Holes
- Internal Inserts with Whitworth Partial Profile for Threading in 8 mm and Larger Holes.
- Can be used for thread milling by circular interpolation.
- TPI min D/5.9.
- D-diameter of thread (pitch max<=W).
SKU: GIQR/L-WT Internal Inserts with Whitworth Partial Profile for Threading in 8 mm and Larger Holes
There are no reviews yet.