• DMIN=(min bore diameter)=(DCN+BD+1)/2 • BD=Size of the boring head being used
(1) Suitable boring heads
(2) Cutting diameter minimum (3) Cutting diameter maximum
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
IHSR-BW Back Face Turning Tools for BHR and TCH AL Rough Boring Heads
Availability:
200 in stock
- Back Face Turning Tools for BHR and TCH AL Rough Boring Heads.
Based on 0 reviews
Be the first to review “IHSR-BW Back Face Turning Tools for BHR and TCH AL Rough Boring Heads”
You may also like…
-
Indexable Tools, TURNING TOOLS, Turning Inserts
CCGW/CCMT (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel
Indexable Tools, TURNING TOOLS, Turning InsertsCCGW/CCMT (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel
- 80° rhombic inserts with CBN single top corner brazed tip, used for finishing forged steel.
SKU: CCGW/CCMT (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel -
Indexable Tools, Boring and Reaming Tools, Boring Holder & ACCESSORIES
TCH AL Aluminum Twin Cutter Heads for Rough and Fine Boring Operations, Diameter Range 200-1200 mm
Indexable Tools, Boring and Reaming Tools, Boring Holder & ACCESSORIESTCH AL Aluminum Twin Cutter Heads for Rough and Fine Boring Operations, Diameter Range 200-1200 mm
- Aluminum Twin Cutter Heads for Rough and Fine Boring Operations, Diameter Range 200-1200 mm.
SKU: TCH AL Aluminum Twin Cutter Heads for Rough and Fine Boring Operations, Diameter Range 200-1200 mm -
Indexable Tools, TURNING TOOLS, Turning Inserts
CCET-WF 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
Indexable Tools, TURNING TOOLS, Turning InsertsCCET-WF 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
- 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing.
SKU: CCET-WF 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing -
Indexable Tools, TURNING TOOLS, Turning Inserts
CCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum
Indexable Tools, TURNING TOOLS, Turning InsertsCCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum
- Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum.
SKU: CCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum
There are no reviews yet.