(1) Brazed tool
(2) Cutting diameter minimum
(3) Cutting diameter maximum
(4) Minimum overhang
(5) For DCONMS=8 mm, 16 mm O.D. sleeves should be used.
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
IHAXF Brazed and Indexable Boring Bars for the MB Modular Boring System
Availability:
200 in stock
- Brazed and Indexable Boring Bars for the MB Modular Boring System.
Based on 0 reviews
Be the first to review “IHAXF Brazed and Indexable Boring Bars for the MB Modular Boring System”
You may also like…
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
BHF MB-BL Fine Boring Heads with a Balancing Mechanism and 2 Micrometer Direct Diametric Adjustment
Indexable Tools, Boring and Reaming Tools, Fine boring toolsBHF MB-BL Fine Boring Heads with a Balancing Mechanism and 2 Micrometer Direct Diametric Adjustment
- Fine Boring Heads with a Balancing Mechanism and 2 Micrometer Direct Diametric Adjustment.
SKU: BHF MB-BL Fine Boring Heads with a Balancing Mechanism and 2 Micrometer Direct Diametric Adjustment -
Indexable Tools, TURNING TOOLS, Turning Inserts
TPGX (PCD) Triangular Inserts with a Single PCD Top Corner Tip, 11° Clearance and Positive Rake Angle for Finishing Aluminum
Indexable Tools, TURNING TOOLS, Turning InsertsTPGX (PCD) Triangular Inserts with a Single PCD Top Corner Tip, 11° Clearance and Positive Rake Angle for Finishing Aluminum
- Triangular Inserts with PCD Single Top Corner Brazed Tip, 11° Clearance and Positive Rake Angle for Finishing Aluminum.
SKU: TPGX (PCD) Triangular Inserts with a Single PCD Top Corner Tip, 11° Clearance and Positive Rake Angle for Finishing Aluminum -
Indexable Tools, TURNING TOOLS, Turning Inserts
TPGX Triangular Inserts with an 11° Positive Flank and Ground Chipformer for Finish Turning
Indexable Tools, TURNING TOOLS, Turning InsertsTPGX Triangular Inserts with an 11° Positive Flank and Ground Chipformer for Finish Turning
- Triangular Inserts with an 11° Positive Flank and Ground Chipformer for Finish Turning.
SKU: TPGX Triangular Inserts with an 11° Positive Flank and Ground Chipformer for Finish Turning
There are no reviews yet.