(1) Cutting width tolerance (+/-)
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
GIM-UT-RA/LA Single-Ended Screw- Clamped Inserts for Parting at Low Feeds on CrNi Alloys and Low Carbon Steel
Availability:
200 in stock
- Utility, single-ended, parting, screw clamped inserts.
- Used at low feeds on CrNi alloys, low carbon steel, and other problematic materials, especially in the bearing industry.
Brands | |
---|---|
Units of length | |
Workpiece Material | Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M) |
Based on 0 reviews
Be the first to review “GIM-UT-RA/LA Single-Ended Screw- Clamped Inserts for Parting at Low Feeds on CrNi Alloys and Low Carbon Steel”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
GHGR/L External Holders for Deep Grooving and Parting
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsGHGR/L External Holders for Deep Grooving and Parting
- External holders for deep grooving and parting.
- For machining depth over 13 mm, a single-ended insert is required (GIM, GIMF,GIMY,GIMT,GIMN).
- CDX for grooving depth depends on part diameter CUTDIA.
- For using TIP inserts, tool holder seat needs to be modified according to insert profile to ensure clearance.
- For key blades and adjustable torque handles information (optional).
SKU: GHGR/L External Holders for Deep Grooving and Parting -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
CGHN-D Double-Ended Blades for External Grooving and Turning
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsCGHN-D Double-Ended Blades for External Grooving and Turning
- Double-Ended Blades for External Grooving and Turning.
- Use the yellow lines on blade for min. and max. overhang.
- When using TIP inserts, toolholder seat needs to be modified according to insert profile to ensure clearance.
- When using a double-ended insert, grooving depth is limited by the insert.
SKU: CGHN-D Double-Ended Blades for External Grooving and Turning -
Indexable Tools, Parting And Grooving Tools, External grooving, Face grooving
GHMR/L Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
Indexable Tools, Parting And Grooving Tools, External grooving, Face groovingGHMR/L Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
- Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts.
- To control the clamping torque, use interchangeable key blades and adjustable torque handles (optional).
- Use for recessing: light turning, small depth of cut (ap=0.1-0.5 mm) and small feed (f=0.1 mm/rev).
SKU: GHMR/L Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
There are no reviews yet.