DIN69871-HYDRO Hydraulic Chucks with DIN69781 Form ADB Shanks

• Chucking forces will be reduced by 25% if reduction sleeves are used. • Note: Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (ordered separately).                                    • The coolant passages in the B type flange are blocked with screws which can be removed when required.                                                                                                                                                • Clamping wrench (wrench HYDRO HEX 4) and test bar should be ordered separately.
(1) Balanced to G2.5/18,000 RPM.
(2) Balanced to G2.5/12,000 RPM.* Optional, should be ordered separately