(1) Inserts with coolant holes, recommended coolant pressure 10 bar minimum
(2) Single-ended insert.
(3) Cutting width tolerance (+/-)
(4) Corner radius tolerance (+/-)
(5) Cutting depth maximum
(6) No depth limit
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
Availability:
200 in stock
- Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
Brands | |
---|---|
Units of length | |
Workpiece Material | Aluminium (N), Cast Iron (K), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, Face grooving
HFPAD-6 Adapters for Face Machining
- Adapters for Face Machining.
- WF(assembly)=WF(shank) + WF(adapter).
- DGN & GRIP 6.. inserts can be used only with right-hand adapters, HGPL 6..inserts with left-hand adapters.
SKU: HFPAD-6 Adapters for Face Machining -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGFHL-26B-TR-D Reinforced Type Blades with Screw Clamping for Traub and Index Machines
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGFHL-26B-TR-D Reinforced Type Blades with Screw Clamping for Traub and Index Machines
- Reinforced Type Blades with Screw Clamping for TRAUB and Index Machines.
- Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
SKU: DGFHL-26B-TR-D Reinforced Type Blades with Screw Clamping for Traub and Index Machines -
Indexable Tools, Parting And Grooving Tools, Face grooving
HFFR/L-T Blades for Face Machining
- Blades for Face Machining.
- After initial groove, no limitation to widening groove outward or toward center.
- DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades.
SKU: HFFR/L-T Blades for Face Machining -
Indexable Tools, Parting And Grooving Tools, Face grooving
HFAIR/L-DG Adapters for Internal Face Grooving and Turning
Indexable Tools, Parting And Grooving Tools, Face groovingHFAIR/L-DG Adapters for Internal Face Grooving and Turning
- Adapters for Internal Face Grooving and Turning.
- After initial groove, no limitation to widening groove outward or toward center.
- DGN inserts can be used on right- and left-hand tools.
- GRIP inserts only on right-hand tools.
- HFPR/L right-hand inserts on right-hand tools (same for left-hand), and HGPL inserts only on left-hand tools.
SKU: HFAIR/L-DG Adapters for Internal Face Grooving and Turning
There are no reviews yet.