Turning Inserts
Showing 511–540 of 1166 results
-
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TCMT(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TCMT(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TCMW
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TCMW -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TCMX
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for TCMX -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TCMX(inch)
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for TCMX(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNGA
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for TNGA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNGA(inch)
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for TNGA(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNMA
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TNMA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNMA(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TNMA(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNMG
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TNMG -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNMG(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TNMG(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNMM
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TNMM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNMM(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TNMM(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNMX
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TNMX -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TNMX(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TNMX(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TPGH
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TPGH -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TPGT
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TPGT -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for TPGT/TPGH(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for TPGT/TPGH(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VBET
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VBET -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VBGT
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VBGT -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VBGW
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VBGW -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VBGW(inch)
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VBGW(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VBMT
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VBMT -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VBMT(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VBMT(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VBMX
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VBMX -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VBMX(inch)
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VBMX(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VCGT
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VCGT -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VCGT(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VCGT(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VCGW
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VCGW -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VCGW(inch)
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VCGW(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VCGX
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VCGX
