Internal grooving
Showing 31–48 of 48 results
-
Indexable Tools, Internal grooving, Parting And Grooving Tools
Grooving Tools MGIVR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools MGIVR/L -
Indexable Tools, Internal grooving, Parting And Grooving Tools
Grooving Tools S-KTGFR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools S-KTGFR/L -
Indexable Tools, Internal grooving, Parting And Grooving Tools
Grooving Tools SNGR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools SNGR/L -
Indexable Tools, Internal grooving, Parting And Grooving Tools
Grooving Tools STGFS
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools STGFS -
Indexable Tools, Internal grooving, Parting And Grooving Tools
HELIIR/L Grooving and Turning Bars with Coolant Holes for HELI-GRIP Utility Inserts
Indexable Tools, Internal grooving, Parting And Grooving ToolsHELIIR/L Grooving and Turning Bars with Coolant Holes for HELI-GRIP Utility Inserts
- Grooving and turning bars with coolant holes for HELI-GRIP utility inserts.
-
DO-GRIP DGN inserts may be used only for grooving: DGN 4.. (Dmin=51 mm), DGN 5.. (Dmin=57 mm) and DGN 6.. (Dmin=62 mm).
SKU: HELIIR/L Grooving and Turning Bars with Coolant Holes for HELI-GRIP Utility Inserts -
Indexable Tools, Internal grooving, Parting And Grooving Tools
Internal grooving and turning tools
- A single tool with multiple applications such as grooving, parting and profile turning, reducing tools categories needed.
- A multifunctional tool when used with grooving inserts. Suitable for profile machining.
- The maximum slot depth machinable is 30mm.
- By using inserts for grooving and profiling, one tool can be versatile, reducing the tool categories needed.
SKU: Internal grooving and turning tools -
Indexable Tools, Internal grooving, Parting And Grooving Tools
Internal grooving and turning tools(inch)
Indexable Tools, Internal grooving, Parting And Grooving ToolsInternal grooving and turning tools(inch)
- By installing different inserts for grooving and profiling, one single tool realizes various applications, it reduce the tool category.
- The maximum slot depth can be machined is 0.512inch.
- The minimum diameter can be machined is 1.063inch.
SKU: Internal grooving and turning tools(inch) -
Indexable Tools, Internal grooving, Parting And Grooving Tools
KIT PICCO SET Contains 2 Toolholders and a Set of Solid Carbide Miniature Turning and Grooving Boring Bars
Indexable Tools, Internal grooving, Parting And Grooving ToolsKIT PICCO SET Contains 2 Toolholders and a Set of Solid Carbide Miniature Turning and Grooving Boring Bars
- Contains 2 Toolholders and a Set of Solid Carbide Miniature Turning and Grooving Boring Bars.
SKU: KIT PICCO SET Contains 2 Toolholders and a Set of Solid Carbide Miniature Turning and Grooving Boring Bars -
Indexable Tools, Internal grooving, Parting And Grooving Tools
MGCH Solid Carbide Bars for Internal Grooving, Turning and Threading, Dmin 8 mm
Indexable Tools, Internal grooving, Parting And Grooving ToolsMGCH Solid Carbide Bars for Internal Grooving, Turning and Threading, Dmin 8 mm
- Solid Carbide Bars for Internal Grooving, Turning and Threading, DMIN 8 mm.
- The same tool applies on right and left machining.
SKU: MGCH Solid Carbide Bars for Internal Grooving, Turning and Threading, Dmin 8 mm -
Face grooving, Indexable Tools, Internal grooving, Parting And Grooving Tools
MIFHR Bars for Face and Internal Grooving, Undercutting and Threading Inserts
Face grooving, Indexable Tools, Internal grooving, Parting And Grooving ToolsMIFHR Bars for Face and Internal Grooving, Undercutting and Threading Inserts
- Bars for Face and Internal Grooving, Undercutting and Threading Inserts.
SKU: MIFHR Bars for Face and Internal Grooving, Undercutting and Threading Inserts -
Face grooving, Indexable Tools, Internal grooving, Parting And Grooving Tools
Perpendicular Holders with CAMFIX Exchangeable Shanks for Internal Facing Adapters
Face grooving, Indexable Tools, Internal grooving, Parting And Grooving ToolsPerpendicular Holders with CAMFIX Exchangeable Shanks for Internal Facing Adapters
- Perpendicular Holders with CAMFIX Exchangeable Shanks for Internal Facing Adapters.
SKU: Perpendicular Holders with CAMFIX Exchangeable Shanks for Internal Facing Adapters -
External grooving, Indexable Tools, Internal grooving, Parting And Grooving Tools, Parting off tools
Single-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel
External grooving, Indexable Tools, Internal grooving, Parting And Grooving Tools, Parting off toolsSingle-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel
- Single-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel.
- Cutting width tolerance (+/-).
SKU: Single-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel -
Indexable Tools, Internal grooving, Parting And Grooving Tools
TGHN 26-M Internal Grooving and Turning Blades for GHIC…-70 Bars
Indexable Tools, Internal grooving, Parting And Grooving ToolsTGHN 26-M Internal Grooving and Turning Blades for GHIC…-70 Bars
- Internal Grooving and Turning Blades for GHIC…-70 Bars.
-
Grooving depth (CDX) varies in conformance with blade’s overhang (WFN-WFX and depends on the bore diameter (D).
-
TGHN 26…-M can be modified from external double-sided TGHN blades.
SKU: TGHN 26-M Internal Grooving and Turning Blades for GHIC...-70 Bars -
Indexable Tools, Internal grooving, Parting And Grooving Tools
TGIR/L-C Grooving and Turning Bars with Coolant Holes Carrying TOP-GRIP Utility Inserts
Indexable Tools, Internal grooving, Parting And Grooving ToolsTGIR/L-C Grooving and Turning Bars with Coolant Holes Carrying TOP-GRIP Utility Inserts
- Grooving and Turning Bars with Coolant Holes Carrying TOP-GRIP Utility Inserts.
SKU: TGIR/L-C Grooving and Turning Bars with Coolant Holes Carrying TOP-GRIP Utility Inserts -
Face grooving, Indexable Tools, Internal grooving, Parting And Grooving Tools
Tools for Internal Grooving and Turning with ISO 26622- 1(*) Tapered Shank
Face grooving, Indexable Tools, Internal grooving, Parting And Grooving ToolsTools for Internal Grooving and Turning with ISO 26622- 1(*) Tapered Shank
- Tools for internal grooving and turning with ISO 26622-1(*) tapered shank.
- (*) Tools with orientation holes in the flange groove can be supplied on request.
- DGN & GRIP 4.. – 6.. inserts can be used only with right-hand tools, HGPL 4.. – 6.. inserts with left-hand tools.
- After initial groove, no limitation to widening groove outward or toward center.
SKU: Tools for Internal Grooving and Turning with ISO 26622- 1(*) Tapered Shank