Grooving Inserts
Showing 31–60 of 298 results
-
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-C-XL Extra Long Parting and Grooving Inserts for Parting Bars Up to 65 mm Diameters, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-C-XL Extra Long Parting and Grooving Inserts for Parting Bars Up to 65 mm Diameters, Hard Materials and Tough Applications
- Extra Long Parting and Grooving Inserts for Parting Bars Up to 65 mm Diameters, Hard Materials and Tough Applications.
SKU: DGN-C-XL Extra Long Parting and Grooving Inserts for Parting Bars Up to 65 mm Diameters, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-J-XL Extra Long Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-J-XL Extra Long Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Extra Long Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
SKU: DGN-J-XL Extra Long Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel
- Double-Sided Inserts for Parting and Grooving Stainless Steel.
- The LFT chipformer features basically the same design as the LF chipformer, except that it is reinforced by a T-land to improve its durability in interrupted-cut or on hard materials applications.
- It can be applied at higher feeds than the LF chipformer.
SKU: DGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
- Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds.
SKU: DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-P Double-Sided Inserts for Parting and Grooving Soft Materials, Thin and Miniature Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-P Double-Sided Inserts for Parting and Grooving Soft Materials, Thin and Miniature Parts
- Double-Sided Inserts for Parting and Grooving Soft Materials, Thin and Miniature Parts.
SKU: DGN-P Double-Sided Inserts for Parting and Grooving Soft Materials, Thin and Miniature Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
- Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds.
SKU: DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-W Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-W Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts
- Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts.
- No depth limit.
SKU: DGN-W Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-WP Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-WP Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish
- Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish.
SKU: DGN-WP Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
- Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
SKU: DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR-P Double-Sided Inserts for Parting Soft Materials, Thin and Miniature Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR-P Double-Sided Inserts for Parting Soft Materials, Thin and Miniature Parts
- Double-Sided Inserts for Parting Soft Materials, Thin and Miniature Parts.
SKU: DGR-P Double-Sided Inserts for Parting Soft Materials, Thin and Miniature Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR-WP Double-Sided Parting Inserts with a Wiper Design for High Flatness and Surface Finish
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR-WP Double-Sided Parting Inserts with a Wiper Design for High Flatness and Surface Finish
- Double-Sided Parting Inserts with a Wiper Design for High Flatness and Surface Finish.
SKU: DGR-WP Double-Sided Parting Inserts with a Wiper Design for High Flatness and Surface Finish -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts
- Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts.
SKU: DGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
- Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: DGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-C-XL Extra Long Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-C-XL Extra Long Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
- Extra Long Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications.
SKU: DGR/L-C-XL Extra Long Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-J-XL Extra Long Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-J-XL Extra Long Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
- Extra Long Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts.
SKU: DGR/L-J-XL Extra Long Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
SKU: DGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
GDMA Utility Double-Ended Insert with a Polished Top Rake for Machining Aluminum
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsGDMA Utility Double-Ended Insert with a Polished Top Rake for Machining Aluminum
- Utility double-ended insert with a polished top rake for machining aluminum.
- For heavy-duty machining.
- DMIN for internal machining = 65 mm.
SKU: GDMA Utility Double-Ended Insert with a Polished Top Rake for Machining Aluminum -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
GDMM-CC Single-Ended Utility Insert for External Rough Grooving and Side Turning with a Frontal Chip Splitte
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsGDMM-CC Single-Ended Utility Insert for External Rough Grooving and Side Turning with a Frontal Chip Splitte
- Single-Ended Utility Insert for External Rough Grooving and Side Turning with a Frontal Chip Splitter.
SKU: GDMM-CC Single-Ended Utility Insert for External Rough Grooving and Side Turning with a Frontal Chip Splitte -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
GDMN Utility Double-Ended Inserts, for Grooving and Turning Ductile Materials
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsGDMN Utility Double-Ended Inserts, for Grooving and Turning Ductile Materials
- Utility Double-Ended Inserts, for Grooving and Turning Ductile Materials.
- DMIN for internal machining = 65 mm.
SKU: GDMN Utility Double-Ended Inserts, for Grooving and Turning Ductile Materials -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
GDMW 2.4 Utility Double-Ended Inserts for External Turning, Grooving and Parting
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsGDMW 2.4 Utility Double-Ended Inserts for External Turning, Grooving and Parting
- Utility Double-Ended Inserts for External Turning, Grooving and Parting.
SKU: GDMW 2.4 Utility Double-Ended Inserts for External Turning, Grooving and Parting -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
GDMY (full radius) Utility Double-Ended Full Radius Inserts for Grooving and Profiling
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsGDMY (full radius) Utility Double-Ended Full Radius Inserts for Grooving and Profiling
- Utility Double-Ended Full Radius Inserts for Grooving and Profiling..
- Can cut arcs to 250°.
- DMIN for internal machining = 65 mm.
SKU: GDMY (full radius) Utility Double-Ended Full Radius Inserts for Grooving and Profiling