Indexable Tools
Showing 151–180 of 4878 results
-
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
86° Face Mills Carrying all 8 Cutting Edges of LN..1106… Tangentially Clamped Inserts F86LNX-11
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools86° Face Mills Carrying all 8 Cutting Edges of LN..1106… Tangentially Clamped Inserts F86LNX-11
- 86° face mills carrying all 8 cutting edges of LN..1106… tangentially clamped inserts.
- For APMX>3 mm, Zeff is half the number indicated in the table.
- LNAR 1106 inserts should not be used on these cutters .
- F86LNX cutters enable using all 8 cutting edges of the LNKX/LNMT 1106.. inserts- 4 R.H. in the peripheral position and 4 L.H. in the frontal position .
- Feed should be limited to 0.25 mm/tooth.
- Fine pitch.
- Cutting diameter maximum.
- Number of inserts.
SKU: 86° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts F86LNX-11 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09
- 90° face mills carrying H490 ANKX 09.. double-sided rectangular inserts with 4 helical cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
- 90° face mills carrying H490 ANKX 12.. double-sided rectangular inserts with 4 helical cutting edges.
- Number of inserts.
- Maximum ramping angle – valid only when the H490 ANKX1205R 15T-FF insert is used.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
- 90° face mills carrying H490 ANKX 17.. double-sided rectangular inserts with 4 helical cutting edges (HELIDO 490 LINE).
- Rampdown angle is valid only when H490 ANKX 1706R15T-FF insert is used (tool diameter is then 1.5 mm larger).
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-10
- 90° face mills carrying H690 TNKX 1005.. triangular inserts with 6 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-16
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-16
- 90° face mills carrying H690 TNKX 1606.. triangular inserts with 6 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-16 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges HM390 FTC-07
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges HM390 FTC-07
- 90° face mills carrying HM390 TCKT 0703 triangular inserts with 3 helical cutting edges.
- Insert clamping screw must be lubricated every indexing.
- Tightening torque 0.9 Nxm.
SKU: 90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges HM390 FTC-07 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15
- 90° face mills carrying HM390 TDKT 1505 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-19
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-19
- 90° face mills carrying HM390 TDKT 1907 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-19 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10
- 90° face mills carrying HM390 TPKT 1003 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM90 ADKT 1505… Inserts HM90 F90A-15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM90 ADKT 1505… Inserts HM90 F90A-15
- HELI2000, 90° face mills carrying HM90 ADKT 1505… inserts.
-
Thinner insert ADM. 1503.. mounted on TSP-15R seat.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HM90 ADKT 1505... Inserts HM90 F90A-15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM90 APKT 1003… Inserts HM90 F90AP-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM90 APKT 1003… Inserts HM90 F90AP-10
- HELI2000, 90° face mills carrying HM90 APKT 1003… inserts.
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: 90° Face Mills Carrying HM90 APKT 1003... Inserts HM90 F90AP-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP AD.. 1906… Long Edged Inserts HP F90AT-19
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP AD.. 1906… Long Edged Inserts HP F90AT-19
- 90° face mills carrying HP AD.. 1906… long edged inserts.
- Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw. In the same order, tighten them both.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HP AD.. 1906... Long Edged Inserts HP F90AT-19 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP AD.. 2207… Long Edged Inserts HP F90AT-22
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP AD.. 2207… Long Edged Inserts HP F90AT-22
- 90° face mills carrying HP AD.. 2207… long edged inserts.
- Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw.
- In the same order, tighten them both.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying HP AD.. 2207... Long Edged Inserts HP F90AT-22 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07
- HELIPLUS, 90° fine pitch face mills carrying HP ANKT 0702.. inserts.
- Insert tightening torque: 0.62 Nxm.
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: 90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying LN..1106… Tangentially Clamped Inserts F90LN-N11
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying LN..1106… Tangentially Clamped Inserts F90LN-N11
- 90° face mills carrying LN..1106… tangentially clamped inserts.
- Fine pitch.
- Number of inserts.
SKU: 90° Face Mills Carrying LN..1106... Tangentially Clamped Inserts F90LN-N11 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying LN..1506… Tangentially Clamped Inserts F90LN-N15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying LN..1506… Tangentially Clamped Inserts F90LN-N15
- 90° face mills carrying LN..1506… tangentially clamped inserts.
- Left-hand cutters are designated by a red groove.
- Number of inserts.
SKU: 90° Face Mills Carrying LN..1506... Tangentially Clamped Inserts F90LN-N15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying S/X/ QPMT 1004… Inserts F90SP-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying S/X/ QPMT 1004… Inserts F90SP-10
- HELIQUAD, 90° face mills carrying S/X/QPMT 1004… inserts.
- Fine pitch.
- D is 0.2 mm larger when QPMT inserts are used.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying S/X/ QPMT 1004... Inserts F90SP-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T290 LNMT 1004… Tangentially Clamped Inserts T290 FLN-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T290 LNMT 1004… Tangentially Clamped Inserts T290 FLN-10
- SUMOMILL, 90° face mills carrying tangentially clamped, T290 LNMT 1004… inserts with 2 helical cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying T290 LNMT 1004... Tangentially Clamped Inserts T290 FLN-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T290 LNMT 1506… Tangentially Clamped Inserts T290 FLN-15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T290 LNMT 1506… Tangentially Clamped Inserts T290 FLN-15
- 90° face mills carrying tangentially clamped, T290 LNMT 1506… inserts with 2 helical cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying T290 LNMT 1506... Tangentially Clamped Inserts T290 FLN-15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T490 LN#T 11… Tangentially Clamped Inserts T490 FLN-11
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T490 LN#T 11… Tangentially Clamped Inserts T490 FLN-11
- 90° face mills carrying T490 LN#T 11… tangentially clamped inserts.
-
Important: Maximum clamping torque 3.2 N*m.
- Number of inserts.
- Maximum ramping angle – valid only with T490 LNHT 1106PNTR-RD insert.
SKU: 90° Face Mills Carrying T490 LN#T 11... Tangentially Clamped Inserts T490 FLN-11 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T890 LN.T 1306… Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLN-R13
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T890 LN.T 1306… Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLN-R13
- 90° face mills carrying T890 LN.T 1306… tangentially clamped inserts with 8 cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying T890 LN.T 1306... Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLN-R13 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 13 mm Long Cutting Edges T490 FLN-13
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 13 mm Long Cutting Edges T490 FLN-13
- HELITANG T490 Line, 90° face mills carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical 13 mm long cutting edges.
- When machining slots, coarse pitch cutters should be used.
- Number of inserts.
- Maximum ramping angle – valid only when the T490 LNHT 1306 PNTR-RD insert is used.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 13 mm Long Cutting Edges T490 FLN-13 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 16 mm Long Cutting Edges T490 FLN-16
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 16 mm Long Cutting Edges T490 FLN-16
- HELITANG T490 Line, 90° face mills carrying T490 LNMT 16… tangentially clamped inserts with 4 helical 16 mm long cutting edges.
- When machining slots, regular pitch cutters should be used.
- Fine pitch.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 16 mm Long Cutting Edges T490 FLN-16
