SKU: 86° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts F86LNX-11
Categories: Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
86° Face Mills Carrying all 8 Cutting Edges of LN..1106… Tangentially Clamped Inserts F86LNX-11
Availability:
200 in stock
- 86° face mills carrying all 8 cutting edges of LN..1106… tangentially clamped inserts.
- For APMX>3 mm, Zeff is half the number indicated in the table.
- LNAR 1106 inserts should not be used on these cutters .
- F86LNX cutters enable using all 8 cutting edges of the LNKX/LNMT 1106.. inserts- 4 R.H. in the peripheral position and 4 L.H. in the frontal position .
- Feed should be limited to 0.25 mm/tooth.
- Fine pitch.
- Cutting diameter maximum.
- Number of inserts.
Based on 0 reviews
Be the first to review “86° Face Mills Carrying all 8 Cutting Edges of LN..1106… Tangentially Clamped Inserts F86LNX-11”
You may also like…
-
Indexable Tools, Milling Tools, Milling Inserts
LNAT 1106-W Milling Inserts
- Tangentially clamped wiper inserts. 2 R.H. and 2 L.H. cutting edges.
- Use only one wiper insert when feed per revolution is less than 4 mm.
- When feed per revolution is less than 4 mm it is recommended to use only one wiper insert.
- When feed per revolution is greater than 4 mm, it is recommended to use two wiper inserts.
SKU: LNAT 1106-W Milling Inserts -
Indexable Tools, Milling Tools, Milling Inserts
LNKX/LNMT 1106PN-N MM Milling Inserts
- TANGMILL Tangentially clamped inserts, peripherally ground with a very positive chipformer and a reinforced cutting edge.
- Feature low cutting forces and excellent surface finish.
SKU: LNKX/LNMT 1106PN-N MM Milling Inserts
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-borng TooI
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-borng TooI -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH-M Boring Tool For Pin Turning
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH-M Boring Tool For Pin Turning -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH63P Micro-Flnishing Boring Kit
- Adjustment Precision 0.002 mm on Diameter
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
- All DCK-FBH Fine Boring Tools Are With internal Cooling Design,Which increases The Surface Finish And inserts Tool Life
SKU: Micro-Flnishing Boring Kit -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ12 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ12 Micro-boring Bar
There are no reviews yet.