Milling Inserts
Showing 1–30 of 243 results
-
-
Indexable Tools, Milling Inserts, Milling Tools
3M AXKT 1304..R-PDRMM Milling Inserts
- MILL2000 Inserts with a variety of corner radii.
- Heavy duty design: dovetail section shape, helical cutting edge and positive rake angle.
- Enables secure clamping and high durability in rough applications.
SKU: 3M AXKT 1304..R-PDRMM Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
3M AXKT 2006..R-PDR Milling Inserts
- MILL2000 Inserts for heavy milling applications with a variety of corner radii.
- Heavy duty design: dovetail section shape, helical cutting edge and positive rake angle.
- Enable a secure clamping and high durability in rough applications.
SKU: 3M AXKT 2006..R-PDR Milling Inserts -
-
-
Indexable Tools, Milling Inserts, Milling Tools
ADKT 1505-FF Milling Inserts
- Inserts for fast feed milling.
- The cutting diameter of the tool is 0.5 mm larger than the nominal diameter when using this insert.
- Tool corner should be modified to 2.0 mm.
- At D.O.C. larger than apmax, regular insert feed should be applied.
SKU: ADKT 1505-FF Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
ADKT 1505PDR/L-HM Milling Inserts
- Inserts with 2 helical cutting edges, for general use.
- Grooving depth (CDX) varies in conformance with blade’s overhang (WFN-WFX and OHN-OHX) and depends on the bore diameter (D).
- CGHN 26…-M can be modified from external double-sided CGHN blades.
- When TIP inserts are used the seat needs to be modified to ensure clearance.
SKU: ADKT 1505PDR/L-HM Milling Inserts -
-
Indexable Tools, Milling Inserts, Milling Tools
ADKW (CBN) 1505PDER/TR Milling Inserts
- Single corner R.H. inserts with an IB85 PCBN brazed tip insert, for machining hardened.
- And cast steel with over 45 HRc, grey and nodular cast iron, powder compacted and sintered metals and heat resistant alloys.
SKU: ADKW (CBN) 1505PDER/TR Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
ADKW (PCD) 1505 Milling Inserts
- Single Corner R.H. PCD Tipped inserts for milling aluminum.
- With excellent surface finish results. ID 5 for aluminum with up to 12% silicon and ID8 for higher silicon contents.
- The inserts are supplied with spare screws.
- For D.O.C and cutting speed data, see More Info
SKU: ADKW (PCD) 1505 Milling Inserts -
-
-
-
-
Indexable Tools, Milling Inserts, Milling Tools
BCR Milling Inserts
- The DROPMILL insert has a straight cutting edge tangent to a round corner.
- It enables machining of a shoulder with a round corner.
- A protrusion on the bottom mounts in a mating slot in the pocket to maintain high edge location precision.
SKU: BCR Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
BLR Milling Inserts
- Round segment double-sided inserts for ball nose milling cutters.
- MFW – Serrated cutting edge for roughing operations.
- QCS – Chip splitting cutting edge for semi-finish and finish applications.
- QT – Round edge for finishing applications.
- Radius generated on workpiece.
SKU: BLR Milling Inserts