SKU: APKT 1003..R Milling Inserts
Categories: Indexable Tools, Milling Inserts, Milling Tools
Indexable Tools, Milling Inserts, Milling Tools
APKT 1003..R Milling Inserts
Availability:
500 in stock
- Inserts with ground large corner radii.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “APKT 1003..R Milling Inserts”
You may also like…
-
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling tools
HM90 E90A-M-10 Milling Tools
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling toolsHM90 E90A-M-10 Milling Tools
- HELI2000 90° endmills with a FLEXFIT threaded adaptation carrying HM90 AP.. 1003… inserts.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter
SKU: HM90 E90A-M-10 Milling Tools -
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling tools
HM90 E90A-10 Milling Tools
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling toolsHM90 E90A-10 Milling Tools
- Endmills carrying HM90 AP.. 1003… inserts.
- Number of inserts.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
- 0 – Without coolant supply, 1 – With coolant supply.
- Maximum RPM.
SKU: HM90 E90A-10 Milling Tools -
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling tools
HM90 E90A-MM-10 Milling Tools
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling toolsHM90 E90A-MM-10 Milling Tools
- HELI2000 90° endmills with a MULTI-MASTER threaded adaptation carrying HM90 AP.. 1003… inserts.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- Number of inserts.
- Maximum ramping angle.
- Clamping wrench size.
SKU: HM90 E90A-MM-10 Milling Tools -
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling tools
90° Face Mills Carrying HM90 APKT 1003… Inserts HM90 F90AP-10
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling tools90° Face Mills Carrying HM90 APKT 1003… Inserts HM90 F90AP-10
- HELI2000, 90° face mills carrying HM90 APKT 1003… inserts.
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: 90° Face Mills Carrying HM90 APKT 1003... Inserts HM90 F90AP-10
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-borng TooI
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-borng TooI -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH Finish Borng Tool
1.Each boring head with three different sizes insert holders for different boring ranges.
2.Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
3.Insert holder can be mounted in opposite direction to back boring.
4.Better connection between insert holder and tool body provides higher tool prigidty and working performance.
5.AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool lifeSKU: CBH Finish Borng Tool -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ12 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ12 Micro-boring Bar
There are no reviews yet.