Face milling
Showing 301–330 of 331 results
-
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling Tools
SOF45(continued) Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling ToolsSOF45(continued) Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles
- Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles.
- 1- with ONMU 0505… insert.
- 2- with S845 SNMU 1305… insert.
- 3- with RXMT 1607N insert.
- 4- with OXMT 0507R08-FF insert.
- 5- with OXMT 050705-R-HP insert.
- Use only Torx Plus keys.
SKU: SOF45(continued) Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
SOF45WG-R26 Heavy Duty 45° Face Mills, Carrying Wedge Clamped Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges
Chamfer milling, Face milling, Indexable Tools, Milling ToolsSOF45WG-R26 Heavy Duty 45° Face Mills, Carrying Wedge Clamped Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges
- Heavy duty 45° face mills, carrying square or octagonal double-sided inserts with 8/16 cutting edges.
SKU: SOF45WG-R26 Heavy Duty 45° Face Mills, Carrying Wedge Clamped Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges -
Face milling, Indexable Tools, Milling Tools
SPM-D-CA Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber
Face milling, Indexable Tools, Milling ToolsSPM-D-CA Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber
- Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber.
- Number of inserts.
- Maximum RPM.
SKU: SPM-D-CA Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T290 ELN-MM-05 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT290 ELN-MM-05 Milling Tools
- Endmills with a MULTI-MASTER adaptation carrying tangentially clamped inserts.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- Number of inserts.
- Clamping wrench size.
SKU: T290 ELN-MM-05 Milling Tools -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
T4..-SM Conical Shell Mills Conical Extended Flute Shell Mills Carrying T490 LNMT/LNHT 13… Tangentially Clamped Inserts
Chamfer milling, Face milling, Indexable Tools, Milling ToolsT4..-SM Conical Shell Mills Conical Extended Flute Shell Mills Carrying T490 LNMT/LNHT 13… Tangentially Clamped Inserts
- Conical Extended Flute Shell Mills Carrying T490 LNMT/LNHT 13… Tangentially Clamped Inserts.
- Note: RPM should be considered according to the recommended speed applied on the outer diameter obtained by the specific D.O.C.
- On request.
- Cutting diameter maximum.
- Number of flutes.
- Number of peripheral inserts.
SKU: T4..-SM Conical Shell Mills Conical Extended Flute Shell Mills Carrying T490 LNMT/LNHT 13... Tangentially Clamped Inserts -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
T465 FLN-22ST 65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical Cutting Edges
Chamfer milling, Face milling, Indexable Tools, Milling ToolsT465 FLN-22ST 65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical Cutting Edges
- HELITANG T465 Line, 65° face mills carrying tangentially clamped inserts with 4, 22 mm long cutting edges.
- Used for machining large parts such as those found in marine industries, power generation and other heavy industry applications.
- Cutting diameter maximum.
- Number of inserts
SKU: T465 FLN-22ST 65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical Cutting Edges -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-08 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-08 Milling Tools
- T490 Line, 90° endmills carrying T490 LNMT/LNHT 08…tangentially clamped inserts with 4 helical, 8 mm long cutting edges.
- “B” suffix with long cylindrical shank which may be shortened.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- 0 – Without coolant supply, 1 – With coolant supply
- Maximum ramping angle – valid only with T490 LNHT 080404PNR-RD inserts.
SKU: T490 ELN-08 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-11 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-11 Milling Tools
- 90° endmills carrying T490 LN#T 11… tangentially clamped inserts.
- Important: Maximum clamping torque 3.2 N*m.
- Recommended key handle for limiting torque to 3.2 N*m for this item is HSD 4-3.2NM (to be used with BLD 4 T15-4.8 blade)
SKU: T490 ELN-11 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-13 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-13 Milling Tools
-
90° endmills carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 12.5 mm long cutting edges.
- Cutting recommendations: at ap=5, fz=0.15 at ap=10, fz=0.1.
- “B” suffix for long cylindrical shank which may be shortened.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- Maximum ramping angle – valid only when T490 LNHT 1306 PNTR-RD insert is used.
SKU: T490 ELN-13 Milling Tools -
-
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-16 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-16 Milling Tools
- 90° endmills carrying T490 LNMT 16… tangentially clamped inserts with 4 helical, 16 mm long cutting edges (HELITANG T490Line).
- Number of inserts.
- C-Cylindrical, W-Weldon.
SKU: T490 ELN-16 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-C#-13 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-C#-13 Milling Tools
- 90° endmills with CAMFIX shanks carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 12.5 mm long cutting edges (HELITANG T490 Line).
- Number of inserts.
- Maximum ramping angle – valid only when T490 LNHT 1306 PNTR-RD insert is used.
SKU: T490 ELN-C#-13 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-M Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-M Milling Tools
- HELITANG, 90° endmills with a FLEXFIT threaded adaptation carrying tangentially clamped inserts with 4 helical cutting edges.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: T490 ELN-M Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-MM-08 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-MM-08 Milling Tools
- HELITANG, 90° endmills with a MULTI-MASTER threaded adaptation carrying T490 LNMT/LNHT 08… tangentially clamped inserts with 4 helical, 8 mm long cutting edges.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- Number of inserts.
- Clamping wrench size.
- Maximum ramping angle – valid only with T490 LNHT 080404PNR-RD inserts.
SKU: T490 ELN-MM-08 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 FLN-22ST 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 21 mm Long Cutting Edges
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 FLN-22ST 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 21 mm Long Cutting Edges
- HELITANG T490 Line, 90° face mills carrying T490 LNMT 2212 tangentially clamped inserts with 4 helical 21 mm long cutting edges.
- Number of inserts.
SKU: T490 FLN-22ST 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 21 mm Long Cutting Edges -
Face milling, Indexable Tools, Milling Tools
Tower Milling Machine Special Cutter Disc Face Milling Cutter Disc Blade Milling Cutter Rod Round Nose Open Thick
Face milling, Indexable Tools, Milling ToolsTower Milling Machine Special Cutter Disc Face Milling Cutter Disc Blade Milling Cutter Rod Round Nose Open Thick
- Simplify processing and reduce costs.
- One-piece construction, high-hardness treatment.
- Effectively avoid air and prevent friction.
- Fast cutting, smooth chip removal.
SKU: 001-23041805 -
Face milling, Indexable Tools, Milling Tools
TP Face Milling Cutter
- Suitable for steel parts, cast iron, stainless steel material processing.
- It can be used as plane and step surface finish machining.
- Small blade angle, quick cutting.
- Traditional blade can be configured, low cost.
SKU: TP Face Milling Cutter -
Face milling, Indexable Tools, Milling Tools
TP Face Milling Cutter Bar
- It is used for vertical milling machine, end milling machine, gantry milling machine and upper processing plane.
- There are cutter teeth on the end face and circumference, and there are also coarse teeth and fine teeth.
- Three side edge milling cutter: it is used to process all kinds of groove and step surface. There are cutter teeth on both sides and circumference.
SKU: TP Face Milling Cutter Bar -
-
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
TR6 ER Multifunction Endmills that can Carry Four Different Insert Geometries
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsTR6 ER Multifunction Endmills that can Carry Four Different Insert Geometries
- Multifunction Endmills that can Carry Four Different Insert Geometries.
SKU: TR6 ER Multifunction Endmills that can Carry Four Different Insert Geometries -
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
TR6 ER-M Multifunction Endmills with FLEXFIT Threaded Adaptation that can Carry Four Different Insert Geometries
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsTR6 ER-M Multifunction Endmills with FLEXFIT Threaded Adaptation that can Carry Four Different Insert Geometries
- Multifunction Endmills with FLEXFIT Threaded Adaptation that can Carry Four Different Insert Geometries.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: TR6 ER-M Multifunction Endmills with FLEXFIT Threaded Adaptation that can Carry Four Different Insert Geometries -
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
TR6 FR Multifunction Face Mills that can Carry Four Different Insert Geometries
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsTR6 FR Multifunction Face Mills that can Carry Four Different Insert Geometries
- Multifunction Face Mills that can Carry Four Different Insert Geometries.
SKU: TR6 FR Multifunction Face Mills that can Carry Four Different Insert Geometries -