Cut off, slot and groove milling
Showing 1–30 of 205 results
-
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools
2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR
- 2 flute chip splitting toroidal solid carbide milling heads.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Specially tailored radius range, available upon request.
SKU: 2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
3T Type Slotting Cutter Woodworking Tool Router Bits Wood Industrial Grade Milling Cutter Slotting
Cut off, slot and groove milling, Indexable Tools, Milling Tools3T Type Slotting Cutter Woodworking Tool Router Bits Wood Industrial Grade Milling Cutter Slotting
- 25.4mm Diameter 3 T Type Slotting Cutter Woodworking Tool Router Bits For Wood Industrial Grade Milling Cutter Slotting
SKU: 1005001679039029 -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
4 Flute Solid Carbide Heads MM EFS-CF
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools4 Flute Solid Carbide Heads MM EFS-CF
- 4 flute solid carbide heads with 38° helix and variable pitch for chatter free roughing and finishing applications.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
SKU: 4 Flute Solid Carbide Heads MM EFS-CF -
Copy milling, contouring, Cut off, slot and groove milling, High-feed milling, Indexable Tools, Milling Tools
4, 6 Flute Solid Carbide Heads MM EFF
Copy milling, contouring, Cut off, slot and groove milling, High-feed milling, Indexable Tools, Milling Tools4, 6 Flute Solid Carbide Heads MM EFF
- Interchangeable solid carbide FEEDMILL heads with 4 or 6 flute, for milling at very high feed and small D.O.C.
- Do not apply lubricant to the threaded connection.
SKU: 4, 6 Flute Solid Carbide Heads MM EFF -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09
- 90° face mills carrying H490 ANKX 09.. double-sided rectangular inserts with 4 helical cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
- 90° face mills carrying H490 ANKX 12.. double-sided rectangular inserts with 4 helical cutting edges.
- Number of inserts.
- Maximum ramping angle – valid only when the H490 ANKX1205R 15T-FF insert is used.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
- 90° face mills carrying H490 ANKX 17.. double-sided rectangular inserts with 4 helical cutting edges (HELIDO 490 LINE).
- Rampdown angle is valid only when H490 ANKX 1706R15T-FF insert is used (tool diameter is then 1.5 mm larger).
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-10
- 90° face mills carrying H690 TNKX 1005.. triangular inserts with 6 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-16
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-16
- 90° face mills carrying H690 TNKX 1606.. triangular inserts with 6 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-16 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges HM390 FTC-07
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges HM390 FTC-07
- 90° face mills carrying HM390 TCKT 0703 triangular inserts with 3 helical cutting edges.
- Insert clamping screw must be lubricated every indexing.
- Tightening torque 0.9 Nxm.
SKU: 90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges HM390 FTC-07 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15
- 90° face mills carrying HM390 TDKT 1505 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-19
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-19
- 90° face mills carrying HM390 TDKT 1907 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-19 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10
- 90° face mills carrying HM390 TPKT 1003 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM90 ADKT 1505… Inserts HM90 F90A-15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM90 ADKT 1505… Inserts HM90 F90A-15
- HELI2000, 90° face mills carrying HM90 ADKT 1505… inserts.
-
Thinner insert ADM. 1503.. mounted on TSP-15R seat.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HM90 ADKT 1505... Inserts HM90 F90A-15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM90 APKT 1003… Inserts HM90 F90AP-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM90 APKT 1003… Inserts HM90 F90AP-10
- HELI2000, 90° face mills carrying HM90 APKT 1003… inserts.
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: 90° Face Mills Carrying HM90 APKT 1003... Inserts HM90 F90AP-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP AD.. 1906… Long Edged Inserts HP F90AT-19
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP AD.. 1906… Long Edged Inserts HP F90AT-19
- 90° face mills carrying HP AD.. 1906… long edged inserts.
- Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw. In the same order, tighten them both.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HP AD.. 1906... Long Edged Inserts HP F90AT-19 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP AD.. 2207… Long Edged Inserts HP F90AT-22
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP AD.. 2207… Long Edged Inserts HP F90AT-22
- 90° face mills carrying HP AD.. 2207… long edged inserts.
- Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw.
- In the same order, tighten them both.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying HP AD.. 2207... Long Edged Inserts HP F90AT-22 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07
- HELIPLUS, 90° fine pitch face mills carrying HP ANKT 0702.. inserts.
- Insert tightening torque: 0.62 Nxm.
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: 90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying LN..1106… Tangentially Clamped Inserts F90LN-N11
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying LN..1106… Tangentially Clamped Inserts F90LN-N11
- 90° face mills carrying LN..1106… tangentially clamped inserts.
- Fine pitch.
- Number of inserts.
SKU: 90° Face Mills Carrying LN..1106... Tangentially Clamped Inserts F90LN-N11 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying LN..1506… Tangentially Clamped Inserts F90LN-N15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying LN..1506… Tangentially Clamped Inserts F90LN-N15
- 90° face mills carrying LN..1506… tangentially clamped inserts.
- Left-hand cutters are designated by a red groove.
- Number of inserts.
SKU: 90° Face Mills Carrying LN..1506... Tangentially Clamped Inserts F90LN-N15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying S/X/ QPMT 1004… Inserts F90SP-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying S/X/ QPMT 1004… Inserts F90SP-10
- HELIQUAD, 90° face mills carrying S/X/QPMT 1004… inserts.
- Fine pitch.
- D is 0.2 mm larger when QPMT inserts are used.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying S/X/ QPMT 1004... Inserts F90SP-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T290 LNMT 1004… Tangentially Clamped Inserts T290 FLN-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T290 LNMT 1004… Tangentially Clamped Inserts T290 FLN-10
- SUMOMILL, 90° face mills carrying tangentially clamped, T290 LNMT 1004… inserts with 2 helical cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying T290 LNMT 1004... Tangentially Clamped Inserts T290 FLN-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T290 LNMT 1506… Tangentially Clamped Inserts T290 FLN-15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T290 LNMT 1506… Tangentially Clamped Inserts T290 FLN-15
- 90° face mills carrying tangentially clamped, T290 LNMT 1506… inserts with 2 helical cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying T290 LNMT 1506... Tangentially Clamped Inserts T290 FLN-15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T490 LN#T 11… Tangentially Clamped Inserts T490 FLN-11
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T490 LN#T 11… Tangentially Clamped Inserts T490 FLN-11
- 90° face mills carrying T490 LN#T 11… tangentially clamped inserts.
-
Important: Maximum clamping torque 3.2 N*m.
- Number of inserts.
- Maximum ramping angle – valid only with T490 LNHT 1106PNTR-RD insert.
SKU: 90° Face Mills Carrying T490 LN#T 11... Tangentially Clamped Inserts T490 FLN-11 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T890 LN.T 1306… Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLN-R13
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T890 LN.T 1306… Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLN-R13
- 90° face mills carrying T890 LN.T 1306… tangentially clamped inserts with 8 cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying T890 LN.T 1306... Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLN-R13 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 13 mm Long Cutting Edges T490 FLN-13
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 13 mm Long Cutting Edges T490 FLN-13
- HELITANG T490 Line, 90° face mills carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical 13 mm long cutting edges.
- When machining slots, coarse pitch cutters should be used.
- Number of inserts.
- Maximum ramping angle – valid only when the T490 LNHT 1306 PNTR-RD insert is used.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 13 mm Long Cutting Edges T490 FLN-13 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 16 mm Long Cutting Edges T490 FLN-16
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 16 mm Long Cutting Edges T490 FLN-16
- HELITANG T490 Line, 90° face mills carrying T490 LNMT 16… tangentially clamped inserts with 4 helical 16 mm long cutting edges.
- When machining slots, regular pitch cutters should be used.
- Fine pitch.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 16 mm Long Cutting Edges T490 FLN-16 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills with CAMFIX Shanks Carrying Tangentially Clamped Inserts T490 FLN-C#-08
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills with CAMFIX Shanks Carrying Tangentially Clamped Inserts T490 FLN-C#-08
- 90° face mills with CAMFIX (ISO 26623-1 standard) tapered shanks, carrying tangentially clamped inserts.
- Number of inserts.
SKU: 90° Face Mills with CAMFIX Shanks Carrying Tangentially Clamped Inserts T490 FLN-C#-08