Drilling Tools
Showing 61–90 of 167 results
-
BTA deep hole drill, Drilling Tools, Indexable Tools
DSC-I1 Deep Single Tube Counterborer with Through Hole, Internal Single Start Thread and a Brazed Tip (14.5-65 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSC-I1 Deep Single Tube Counterborer with Through Hole, Internal Single Start Thread and a Brazed Tip (14.5-65 dia.)
- Deep Single Tube Counterbore with Through Hole, Internal Single Start Thread and a Brazed Tip (14.5-65 dia.).
- Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: DSC-I1 Deep Single Tube Counterborer with Through Hole, Internal Single Start Thread and a Brazed Tip (14.5-65 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSC-IA Deep Single Tube Counterbore with a Through Hole, Internal Single Start Thread Adjustable Diameter (25-40 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSC-IA Deep Single Tube Counterbore with a Through Hole, Internal Single Start Thread Adjustable Diameter (25-40 dia.)
- Deep Single Tube Counterbore with a Through Hole, Internal Single Start Thread Adjustable Diameter (25-40 dia.).
- Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: DSC-IA Deep Single Tube Counterbore with a Through Hole, Internal Single Start Thread Adjustable Diameter (25-40 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSC-IC Deep Single Tube Counterborer with a Through Hole, Internal Single Start Thread and a Cartridge (40-111 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSC-IC Deep Single Tube Counterborer with a Through Hole, Internal Single Start Thread and a Cartridge (40-111 dia.)
- Deep Single Tube Counterbore with a Through Hole, Internal Single Start Thread and a Cartridge (40-111 dia.).
- Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: DSC-IC Deep Single Tube Counterborer with a Through Hole, Internal Single Start Thread and a Cartridge (40-111 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-E0 Deep Single Tube Drills with External Single Thread Connection and a Brazed Single Tip (8-14.8 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSD-E0 Deep Single Tube Drills with External Single Thread Connection and a Brazed Single Tip (8-14.8 dia.)
- Deep Single Tube Drills with External Single Thread Connection and a Brazed Single Tip (8-14.8 dia.).
- Single Tube System (STS) Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: Deep Single Tube Drills with External Single Thread Connection and a Brazed Single Tip (8-14.8 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-E1 Deep Single Tube Drills with External 2 and 4 Start Thread and a Single Brazed Tip (12.6-20 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSD-E1 Deep Single Tube Drills with External 2 and 4 Start Thread and a Single Brazed Tip (12.6-20 dia.)
- Deep Single Tube Drills with External 2 and 4 Start Thread and a Single Brazed Tip (12.6-20 dia.).
- Single Tube System (STS) Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: DSD-E1 Deep Single Tube Drills with External 2 and 4 Start Thread and a Single Brazed Tip (12.6-20 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-E2/E3 Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (12.6-65 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSD-E2/E3 Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (12.6-65 dia.)
- Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (12.6-65 dia.).
- Single Tube System (STS) Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: DSD-E2/E3 Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (12.6-65 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-EC Deep Single Tube Drills with External 4 Start Thread and Cartridges (29-233 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSD-EC Deep Single Tube Drills with External 4 Start Thread and Cartridges (29-233 dia.)
- Deep Single Tube Drills with External 4 Start Thread and Cartridges (29-233 dia.)
- The only deep drills with a 3 cutting edged insert (other manufacturers only offer inserts with 1 or 2 cutting edges).
- Highly accurate peripherally ground insert, provides high hole diameter accuracy of IT10.
- The chip splitter produces narrow chips for efficient chip evacuation, enabling higher feed rates compared to other drills available in the market.
- A wiper on the insert provides extra fine surface finish.
- Direct insert mount – no adjustment needed for accurate hole diameter.
- The drills can carry the new economic solid carbide or the brazed guide pads.
SKU: DSD-EC Deep Single Tube Drills with External 4 Start Thread and Cartridges (29-233 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-EF-FB Deep Single Tube Drills with External 4 Start Thread for High Feed (25-65 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSD-EF-FB Deep Single Tube Drills with External 4 Start Thread for High Feed (25-65 dia.)
- Deep Single Tube Drills with External 4 Start Thread for High Feed (25-65 dia.).
SKU: DSD-EF-FB Deep Single Tube Drills with External 4 Start Thread for High Feed (25-65 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-EF-FT Deep Single Tube Drills with External 4 Start Thread Connection Carrying Triangular Inserts (16-28 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSD-EF-FT Deep Single Tube Drills with External 4 Start Thread Connection Carrying Triangular Inserts (16-28 dia.)
- Deep Single Tube Drills with External 4 Start Thread Connection Carrying Triangular Inserts (16-28 dia.).
- The only deep drills with a 3 cutting edged insert (other manufacturers only offer inserts with 1 or 2 cutting edges)
- Highly accurate peripherally ground insert, provides high hole diameter accuracy of IT10.
- The chip splitter produces narrow chips for efficient chip evacuation, enabling higher feed rates compared to other drills available in the market.
- A wiper on the insert provides extra fine surface finish.
- Direct insert mount – no adjustment needed for accurate hole diameter.
- The drills can carry the new economic solid carbide or the brazed guide pads.
SKU: DSD-EF-FT Deep Single Tube Drills with External 4 Start Thread Connection Carrying Triangular Inserts (16-28 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-I1 Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (14.5-65 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSD-I1 Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (14.5-65 dia.)
- Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (14.5-65 dia.).
- Single Tube System (STS) Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: DSD-I1 Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (14.5-65 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-IC Deep Single Tube Drills with Internal Single Start Thread and Cartridges (29-246 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSD-IC Deep Single Tube Drills with Internal Single Start Thread and Cartridges (29-246 dia.)
- Deep Single Tube Drills with Internal Single Start Thread and Cartridges (29-246 dia.).
- Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: DSD-IC Deep Single Tube Drills with Internal Single Start Thread and Cartridges (29-246 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-IF-FT Deep Single Tube Drills with Internal Single Start Thread Carrying Triangular Inserts (16-28 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDSD-IF-FT Deep Single Tube Drills with Internal Single Start Thread Carrying Triangular Inserts (16-28 dia.)
- Deep Single Tube Drills with Internal Single Start Thread Carrying Triangular Inserts (16-28 dia.).
- The only deep drills with a 3 cutting edged insert (other manufacturers only offer inserts with 1 or 2 cutting edges).
- Highly accurate peripherally ground insert, provides high hole diameter accuracy of IT10.
- The chip splitter produces narrow chips for efficient chip evacuation, enabling higher feed rates compared to other drills available in the market.
- A wiper on the insert provides extra fine surface finish.
- Direct insert mount – no adjustment needed for accurate hole diameter.
- The drills can carry the new economic solid carbide or the brazed guide pads.
SKU: DSD-IF-FT Deep Single Tube Drills with Internal Single Start Thread Carrying Triangular Inserts (16-28 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DST-E1 Deep Single Tube Counterborer with Through Hole, External 4 Start Thread and a Brazed Tip (18.9-65 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDST-E1 Deep Single Tube Counterborer with Through Hole, External 4 Start Thread and a Brazed Tip (18.9-65 dia.)
- Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Brazed Tip (18.9-65 dia.).
- Single Tube System (STS) Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: DST-E1 Deep Single Tube Counterborer with Through Hole, External 4 Start Thread and a Brazed Tip (18.9-65 dia.) -
BTA deep hole drill, Drilling Tools, Indexable Tools
DST-I1 Deep Single Tube Counterborer Without a Through Hole, Internal Single Start Thread and a Brazed Tip (14.5-65 dia.)
BTA deep hole drill, Drilling Tools, Indexable ToolsDST-I1 Deep Single Tube Counterborer Without a Through Hole, Internal Single Start Thread and a Brazed Tip (14.5-65 dia.)
- Deep Single Tube Counterbore with Through Hole, Internal Single Start Thread and a Brazed Tip (14.5-65 dia.).
- Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: DST-I1 Deep Single Tube Counterborer Without a Through Hole, Internal Single Start Thread and a Brazed Tip (14.5-65 dia.) -
Drilling Tools, Indexable insert drills, Indexable Tools
Fast Drill Bit U Drill Rod Lathe use of Violent Drilling WC Cutter Extended Flat Bottom Water Jet Drill Bit
Drilling Tools, Indexable insert drills, Indexable ToolsFast Drill Bit U Drill Rod Lathe use of Violent Drilling WC Cutter Extended Flat Bottom Water Jet Drill Bit
- First of all,the difference between Udrill andordinary drill is that U drill uses hardalloy bladesand designs inner and outer edgeblades.
- After the drill is worn,the blades canbe replaced directly without regrinding.
- U drill is much larger than that of ordinarydrill.
- The drilling range can reach D10mn80mrand the longest processing depth can reach 5times dianeter.
- The precision of the u-drill 1s higher thanthat of the conventional dr111 and the finishis betterand the u-drill can correct theprecision ofthe hole cosition.
- U drill can drill holes on surfaces with inclination angles less than 30withoutreducing cutting paraneters.
SKU: 001-23041201 -
Drilling Tools, Exchangeable head drills, Indexable Tools
FCP Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
Drilling Tools, Exchangeable head drills, Indexable ToolsFCP Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
- Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials).
- FCP geometry provides a nearly flat bottom in the hole, which is required in a variety of applications.
SKU: FCP Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials -
Drilling Tools, Gun drill, Indexable Tools
GD-DH (12-13.5) Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
Drilling Tools, Gun drill, Indexable ToolsGD-DH (12-13.5) Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
- Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality.
- Drilling precision of IT7 to IT9 tolerances can be reached.
- Excellent straightness and concentricity.
- Maintains high precision hole center alignment.
- S urface roughness of R0.4 – R1.6 is easily obtained.
- R eboring operations are often unnecessary.
SKU: GD-DH (12-13.5) Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality -
Drilling Tools, Gun drill, Indexable Tools
GD-DH Gundrills Carrying Triangular Inserts with 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
Drilling Tools, Gun drill, Indexable ToolsGD-DH Gundrills Carrying Triangular Inserts with 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
- Gundrills Carrying Triangular Inserts with 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality.
- Drilling precision of IT7 to IT9 tolerances can be reached.
- Excellent straightness and concentricity.
- Maintains high precision hole center alignment.
- S urface roughness of R0.4 – R1.6 is easily obtained.
- R eboring operations are often unnecessary.
SKU: GD-DH Gundrills Carrying Triangular Inserts with 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality -
Drilling Tools, Gun drill, Indexable Tools
GD-DHL Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
Drilling Tools, Gun drill, Indexable ToolsGD-DHL Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
- Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality.
- Drilling precision of IT7 to IT9 tolerances can be reached.
- Excellent straightness and concentricity.
- Maintains high precision hole center alignment.
- S urface roughness of R0.4 – R1.6 is easily obtained.
- R eboring operations are often unnecessary.
SKU: GD-DHL Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality -
Drilling Tools, Gun drill, Indexable Tools
GDV Shanks for SUMOGUN Modular Gundrills with Threaded Connection
Drilling Tools, Gun drill, Indexable ToolsGDV Shanks for SUMOGUN Modular Gundrills with Threaded Connection
- Shanks for SUMOGUN Modular Gundrills with Threaded Connection.
- Drilling precision of IT7 to IT9 tolerances can be reached.
- Excellent straightness and concentricity.
- Maintains high precision hole center alignment.
- S urface roughness of R0.4 – R1.6 is easily obtained.
- R eboring operations are often unnecessary.
SKU: GDV Shanks for SUMOGUN Modular Gundrills with Threaded Connection -
Drilling Tools, Exchangeable head drills, Indexable Tools
H3P Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
Drilling Tools, Exchangeable head drills, Indexable ToolsH3P Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
- Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K).
- The unique geometry of the LOGIQ3CHAM self-centering head shapes the produced chips optimally to allow smooth evacuation throughout the 3 high helix polished flutes.
- Available in Diameter Range of 12-25.9 mm with 3 & 5xD body overhang.
SKU: H3P Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K) -
Drilling Tools, Exchangeable head drills, Indexable Tools
HCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
Drilling Tools, Exchangeable head drills, Indexable ToolsHCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
- Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron.
- The HCP drilling heads enable drilling with 12xD drills without the need for pre-hole preparation.
- The drills can be used in clad plates. The 12 L/D ratio drills are commonly used in the heat exchanger and other industries.
- HCP geometry is designed with concave cutting edges, this substantially enhances the self-centering capability of the drill, which enables using long drills (up to 12XD), without a pilot hole operation.
SKU: HCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron -
Drilling Tools, Exchangeable head drills, Indexable Tools
HFP-IQ Exchangeable DFN Drill Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
Drilling Tools, Exchangeable head drills, Indexable ToolsHFP-IQ Exchangeable DFN Drill Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
- Exchangeable DFN Drill Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K).
- The HFP-IQ Drilling Heads have unique self-centering geometry enables using up to 8xD long overhang without the need for a pilot hole operation.
SKU: HFP-IQ Exchangeable DFN Drill Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K) -
Drilling Tools, Exchangeable head drills, Indexable Tools
ICG Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel
Drilling Tools, Exchangeable head drills, Indexable ToolsICG Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel
- Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel.
- ICG geometry designed with chip splitting notches on the cutting edge and an impressed chip breaker on the rake for superior chip control on a wide range of materials.
SKU: ICG Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel -
Drilling Tools, Exchangeable head drills, Indexable Tools
ICK Exchangeable DCN Drill Heads
- Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials).
- ICK geometry was designed for extremely high feed rates, while maintaining long tool life on the ISO K materials group.
SKU: ICK Exchangeable DCN Drill Heads -
Drilling Tools, Exchangeable head drills, Indexable Tools
ICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish
Drilling Tools, Exchangeable head drills, Indexable ToolsICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish
- Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results.
- ICK geometry was designed for extremely high feed rates, while maintaining long tool life on the ISO K materials group.
SKU: ICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish -
Drilling Tools, Exchangeable head drills, Indexable Tools
ICM Exchangeable DCN Drill Heads
- Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M&S Materials).
- ICM geometry provides ultimate performance on austenitic stainless steel and other difficult-to-machine materials from the ISO M group.
SKU: ICM Exchangeable DCN Drill Heads -
Drilling Tools, Exchangeable head drills, Indexable Tools
ICN Exchangeable DCN Drill Heads, for Aluminum (ISO N Materials)
Drilling Tools, Exchangeable head drills, Indexable ToolsICN Exchangeable DCN Drill Heads, for Aluminum (ISO N Materials)
- Exchangeable DCN Drill Heads, for Aluminum (ISO N Materials).
- ICN geometry comes with sharp cutting edges and polished flutes, which are suitable for machining the ISO N materials group.
SKU: ICN Exchangeable DCN Drill Heads, for Aluminum (ISO N Materials)