Boring Holder & ACCESSORIES
Showing 61–90 of 95 results
-
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
KIT BHFH-MB Contains Adapters, Extensions and Boring Bars for 36 to 400 mm Boring Range
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable ToolsKIT BHFH-MB Contains Adapters, Extensions and Boring Bars for 36 to 400 mm Boring Range
- Contains Adapters, Extensions and Boring Bars for 36 to 400 mm Boring Range.
SKU: KIT BHFH-MB Contains Adapters, Extensions and Boring Bars for 36 to 400 mm Boring Range -
Back Boring, Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Location Spindle
- The boring tool could be connected directly to the spindle of the machine without any tool holders, if the hole diameter is larger than Φ610 mm, but positioning spindle must be used.
SKU: Location Spindle -
Boring Holder & ACCESSORIES, Tapping heads
MEGA SYNCHRO TAPPING HOLDER PAT. Tapping range: M2 – M36
-
Improves thread quality and tap life by reducing thrust loads caused by synchronization errors up to 90%.
-
Functions smoothly under high cutting torque of large diameter tapping.
SKU: MEGA SYNCHRO TAPPING HOLDER PAT. Tapping range: M2 - M36 -
-
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Micro-boring head GBH2084
• This boring head has an excellent wide base design and high quality ensuring long life and rigidity even when it is used in an offset position.
• The screw is hardened and ground which guarantees long life and trouble free use.
• An ideal product for mill or jig bore operations.
• interchangeable shanks of the heads make it adaptable for use on different machines.SKU: Micro-boring head GBH2084 -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Micro-boring Head GBJ16
• This boring head has an excellent wide base design and high quality ensuring long life and rigidity even when it is used in an offset position.
• The screw is hardened and ground which guarantees long life and trouble free use.
• An ideal product for mill or jig bore operations.
• interchangeable shanks of the heads make it adaptable for use on different machines.SKU: Micro-boring Head GBJ16 -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Micro-boring Tool Kit GBH2084
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Micro-boring Tool Kit GBH2084 -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Micro-boring Tool Kit GBJ16
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Micro-boring Tool Kit GBJ16 -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
PICCO ACE-BH Holders with Short Shanks for ITS BORE System Carrying PICCOCUT Inserts
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable ToolsPICCO ACE-BH Holders with Short Shanks for ITS BORE System Carrying PICCOCUT Inserts
- Holders with Short Shanks for ITS BORE System Carrying PICCOCUT Inserts.
SKU: PICCO ACE-BH Holders with Short Shanks for ITS BORE System Carrying PICCOCUT Inserts -
-
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Rough Boring Tool Insert Holder DZA/DZB
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable ToolsRough Boring Tool Insert Holder DZA/DZB
- Roughing is primarily focused on metal removal and is performed to open up an existing hole made by methods such as pre-machining, casting or forging.
- Rough boring prepares the hole for finishing.
- For optimized boring, general boring, large diameter- and lightweight boring see the selection of tools, presented below in the overview.
- To eliminate vibration when machining with long overhangs, damped tools are available.
SKU: Rough Boring Tool Insert Holder DZA/DZB -
-
Boring Holder & ACCESSORIES, Quick Change Tapping Chuck, Tapping heads
SYNCHRONIZED TAP Holder Tap Collet type enables quick tap change
Boring Holder & ACCESSORIES, Quick Change Tapping Chuck, Tapping headsSYNCHRONIZED TAP Holder Tap Collet type enables quick tap change
-
Tap Collet type enables quick tap change. Flexible tool layout in combination with the CK Shanks.
SKU: SYNCHRONIZED TAP Holder Tap Collet type enables quick tap change -
-
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
TCH AL Aluminum Twin Cutter Heads for Rough and Fine Boring Operations, Diameter Range 200-1200 mm
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable ToolsTCH AL Aluminum Twin Cutter Heads for Rough and Fine Boring Operations, Diameter Range 200-1200 mm
- Aluminum Twin Cutter Heads for Rough and Fine Boring Operations, Diameter Range 200-1200 mm.
SKU: TCH AL Aluminum Twin Cutter Heads for Rough and Fine Boring Operations, Diameter Range 200-1200 mm