Gesac
Showing 31–60 of 250 results
-
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) CNMG Rhombic 80° with Hole
- LM For semi-finishing of stainless steel and super alloy.
- Variable rake angle + variable blade width, two-way protection of sharpness and strength
certificate. - Heart-shaped chipbreaker, good chipbreaking effect.
- WMV For general steel, alloy steel, cast iron processing.
- Large chip space and low chip evacuation resistance.
- Excellent cutting sharpness and cutting edge strength.
- Get better surface quality.
- UK for machining cast iron.
- Medium cutting edge for unfavorable cutting conditions.
- LR For roughing stainless steel.
- Small rake angle + large blade width, high blade strength.
- Large slot width + shallow slot depth, smooth chip removal.
SKU: Turning Inserts(Negative) CNMG Rhombic 80° with Hole 3 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) CNMG/CNMA/CNMM Rhombic 80° with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts(Negative) CNMG/CNMA/CNMM Rhombic 80° with Hole
- QR For rough machining of carbon steel, cast steel and alloy steel.
- Combination of variable rake angle and variable blade width to meet different cutting depths Cutting edge sharpness and strength requirements;
- HK for cast iron cutting and heavy cutting.
- Strong cutting edge and wide land for improved performance.
- QH For heavy cutting of carbon steel, cast steel and alloy steel.
- Variable edge and step-type chip breaker, low cutting resistance.
- Straight cutting edges and chamfers for cutting sharpness and tip The strength is guaranteed at the same time.
SKU: Turning Inserts(Negative) CNMG/CNMA/CNMM Rhombic 80° with Hole 4 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) DNMG Rhombic 55° with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
SKU: Turning Inserts(Negative) DNMG Rhombic 55° with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) DNMG Rhombic 55° with Hole
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- TS for semi-finishing of general steel and alloy steel.
- Big rake,smooth chip evacuation.
- Variable groove depth design, with super chip removal.
- SV for semi-finishing of general steel and alloy steel.
- Throughout groove and wide chip groove make cutting available in unstable working conditions.
- Long chip groove allows high depth of cuts.
SKU: Turning Inserts(Negative) DNMG Rhombic 55° with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) DNMG/DNMA Rhombic 55° with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts(Negative) DNMG/DNMA Rhombic 55° with Hole
- LR For roughing stainless steel.
- Small rake angle + large blade width, high blade strength.
- Large slot width + shallow slot depth, smooth chip removal.
- QR For rough machining of carbon steel, cast steel and alloy steel.
- Combination of variable rake angle and variable blade width to meet different cutting depths Cutting edge sharpness and strength requirements;
- HK for cast iron cutting and heavy cutting.
- Strong cutting edge and wide land for improved performance.
SKU: Turning Inserts(Negative) DNMG/DNMA Rhombic 55° with Hole 4 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) DNMG/DNMX Rhombic 55° with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts(Negative) DNMG/DNMX Rhombic 55° with Hole
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
- LM For semi-finishing of stainless steel and super alloy.
- Variable rake angle + variable blade width, two-way protection of sharpness and strength
certificate. - Heart-shaped chipbreaker, good chipbreaking effect.
- WMV For general steel, alloy steel, cast iron processing.
- Large chip space and low chip evacuation resistance.
- Excellent cutting sharpness and cutting edge strength.
- Get better surface quality.
- UK for machining cast iron.
- Medium cutting edge for unfavorable cutting conditions.
SKU: Turning Inserts(Negative) DNMG/DNMX Rhombic 55° with Hole 3 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) SNMG Square 90°,with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
SKU: Turning Inserts(Negative) SNMG Square 90°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) SNMG Square 90°,with Hole
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- SV for semi-finishing of general steel and alloy steel.
- Throughout groove and wide chip groove make cutting available in unstable working conditions.
- Long chip groove allows high depth of cuts.
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
SKU: Turning Inserts(Negative) SNMG Square 90°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) SNMG Square 90°,with Hole
- LM For semi-finishing of stainless steel and super alloy.
- Variable rake angle + variable blade width, two-way protection of sharpness and strength
certificate. - UK for machining cast iron.
- Medium cutting edge for unfavorable cutting conditions.
- LR For roughing stainless steel.
- Small rake angle + large blade width, high blade strength.
- Large slot width + shallow slot depth, smooth chip removal.
- QR For rough machining of carbon steel, cast steel and alloy steel.
- Combination of variable rake angle and variable blade width to meet different cutting depths Cutting edge sharpness and strength requirements;
SKU: Turning Inserts(Negative) SNMG Square 90°,with Hole 3 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) SNMG/SNMM/SNMA Square 90°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts(Negative) SNMG/SNMM/SNMA Square 90°,with Hole
- HK for cast iron cutting and heavy cutting.
- Strong cutting edge and wide land for improved performance.
- QH for heavy cutting action of carbon steel, cast steel and alloy steel.
- Single-sided Chip breaker.
- Variable land and progressive chip breaker space, generating lower cutting force.
SKU: Turning Inserts(Negative) SNMG/SNMM/SNMA Square 90°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) TNGG/TNMG Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts(Negative) TNGG/TNMG Triangle 60°,with Hole
- PS for finishing of steel(mild steel) and stainless steel.
- Sharp edge reduces cutting force, enables high quality surface.
- Low feed,small cutting depth.
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- LF for stainless steel finishing to semi-finishing.
- Small blade width + large rake angle, increase the strength of the blade.
- Curved blade design, stable cutting flow direction control
SKU: Turning Inserts(Negative) TNGG/TNMG Triangle 60°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) TNMG Triangle 60°,with Hole
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- TS for semi-finishing of general steel and alloy steel.
- Big rake,smooth chip evacuation.
- Variable groove depth design, with super chip removal.
SKU: Turning Inserts(Negative) TNGG/TNMG Triangle 60°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) TNMG/TNMA Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts(Negative) TNMG/TNMA Triangle 60°,with Hole
- LR For roughing stainless steel.
- Small rake angle + large blade width, high blade strength.
- Large slot width + shallow slot depth, smooth chip removal.
- QR For rough machining of carbon steel, cast steel and alloy steel.
- Combination of variable rake angle and variable blade width to meet different cutting depths Cutting edge sharpness and strength requirements;
- HK for cast iron cutting and heavy cutting.
- Strong cutting edge and wide land for improved performance.
SKU: Turning Inserts(Negative) TNMG/TNMA Triangle 60°,with Hole 4 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) TNMG/TNMX Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts(Negative) TNMG/TNMX Triangle 60°,with Hole
- SV for semi-finishing of general steel and alloy steel.
- Throughout groove and wide chip groove make cutting available in unstable working conditions.
- Long chip groove allows high depth of cuts.
- LV for stainless steel semi-finished to roughing.
- No blade width + open slot, sharp blade, cutting resistance low.
- Large chip flute, suitable for working conditions with large margins.
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
- LM For semi-finishing of stainless steel and super alloy.
- Variable rake angle + variable blade width, two-way protection of sharpness and strength certificate.
- Heart-shaped chipbreaker, good chipbreaking effect.
- WMV For general steel, alloy steel, cast iron processing.
- Large chip space and low chip evacuation resistance.
- Excellent cutting sharpness and cutting edge strength.
- Get better surface quality.
- UK for machining cast iron.
- Medium cutting edge for unfavorable cutting conditions.
SKU: Turning Inserts(Negative) TNMG/TNMX Triangle 60°,with Hole 3 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) VNMG Rhombic35°,with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
SKU: Turning Inserts(Negative) VNMG Rhombic35°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) VNMG Rhombic35°,with Hole
- LM For semi-finishing of stainless steel and super alloy.
- Variable rake angle + variable blade width, two-way protection of sharpness and strength certificate.
- Heart-shaped chipbreaker, good chipbreaking effect.
- UK for machining cast iron.
- Medium cutting edge for unfavorable cutting conditions.
- HK for cast iron cutting and heavy cutting.
- Strong cutting edge and wide land for improved performance.
SKU: Turning Inserts(Negative) VNMG Rhombic35°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) WNMG Trigon60°,with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- LF for stainless steel finishing to semi-finishing.
- Small blade width + large rake angle, increase the strength of the blade.
- Curved blade design, stable cutting flow direction control.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
SKU: Turning Inserts(Negative) WNMG Trigon60°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) WNMG Trigon60°,with Hole
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- SV for semi-finishing of general steel and alloy steel.
- Throughout groove and wide chip groove make cutting available in unstable working conditions.
- Long chip groove allows high depth of cuts.
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
- LM For semi-finishing of stainless steel and super alloy.
- Variable rake angle + variable blade width, two-way protection of sharpness and strength certificate.
- Heart-shaped chipbreaker, good chipbreaking effect.
- WMV For general steel, alloy steel, cast iron processing.
- Large chip space and low chip evacuation resistance.
- Excellent cutting sharpness and cutting edge strength.
- Get better surface quality.
SKU: Turning Inserts(Negative) WNMG Trigon60°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) WNMG/WNMA Trigon60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts(Negative) WNMG/WNMA Trigon60°,with Hole
- UK for machining cast iron.
- Medium cutting edge for unfavorable cutting conditions.
- LR For roughing stainless steel.
- Small rake angle + large blade width, high blade strength.
- Large slot width + shallow slot depth, smooth chip removal.
- QR For rough machining of carbon steel, cast steel and alloy steel.
- Combination of variable rake angle and variable blade width to meet different cutting depths Cutting edge sharpness and strength requirements;
- HK for cast iron cutting and heavy cutting.
- Strong cutting edge and wide land for improved performance.
SKU: Turning Inserts(Negative) WNMG/WNMA Trigon60°,with Hole 2 -
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable deep drill body GD600
- Application: Deep hole drilling for general materials Hole dia. : Φ38 ~ Φ107mm Max. Depth:100xD.
- Advantage: Screw Locking Higher productivity, lower cost, better performance consistence.
SKU: Indexable deep drill body GD600 -
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable deep drill body GD601
- Application: Deep hole drilling for general materials Hole dia. : Ø25 ~ 28.7mm Max. Depth:100xD.
- Advantage: Screw Locking Higher productivity, lower cost, better performance consistence.
SKU: Indexable deep drill body GD601 -
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable deep drill insert GD600 NPMT
- Application: Deep hole drilling for general materials Hole dia. : Φ38 ~ Φ107mm Max. Depth:100xD.
- Advantage: Screw Locking Higher productivity, lower cost, better performance consistence.
SKU: Indexable deep drill insert NPMT -
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable deep drill insert GD600 TPMT
- Application: Deep hole drilling for general materials Hole dia. : Φ38 ~ Φ107mm Max. Depth:100xD.
- Advantage: Screw Locking Higher productivity, lower cost, better performance consistence.
SKU: Indexable deep drill insert TPMT -
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable deep drill insert GD601 NPMT
- Application: Deep hole drilling for general materials Hole dia. : Ø25 ~ 28.7mm Max. Depth:100xD.
- Advantage: Screw Locking Higher productivity, lower cost, better performance consistence.
SKU: Indexable deep drill insert GD601 NPMT -
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable Drill Insert (Patented) QPMG
- Having better performance of chip control and cutting stability.
- Perfect cooling performance.
- Convenient for tools management.
- Having better fracture resistance.
SKU: Indexable Drill Insert (Patented) QPMG -
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable Drilling GHD-2D
-
High-quality alloy steel — Superior rigidity and fracture resistance.
-
Advanced spiral groove design and manufacturing technology — Improving chipremoval performance.
-
Nickel-coated surface treatment — Great corrosion resistance.
SKU: Indexable Drilling GHD-2D -
-
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable Drilling GHD-3D
-
High-quality alloy steel —Superior rigidity and fracture resistance.
-
Advanced spiral groove design and manufacturing technology — Improving chipremoval performance.
-
Nickel-coated surface treatment —Great corrosion resistance.
SKU: Indexable Drilling GHD-3D -
-
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable Drilling GHD-4D
-
High-quality alloy steel —Superior rigidity and fracture resistance.
-
Advanced spiral groove design and manufacturing technology — Improving chipremoval performance.
-
Nickel-coated surface treatment —Great corrosion resistance.
SKU: Indexable Drilling GHD-4D -
-
Drilling Tools, Indexable insert drills, Indexable Tools
Indexable Drilling GHD-5D
-
High-quality alloy steel —Superior rigidity and fracture resistance.
-
Advanced spiral groove design and manufacturing technology — Improving chipremoval performance.
-
Nickel-coated surface treatment —Great corrosion resistance.
SKU: Indexable Drilling GHD-5D -
-
Chamfer milling, Indexable Tools, Milling Tools
INDEXABLE MILLING Chamfer Milling MCA130 Weldon
- 4 cutting edges for positive and negative chamfering;
- 2 blade specifications, IC: 09/12.
- Suitable for the cutting of steel,stainless steel and heat-resisting alloy,mainly used for chamfer milling.
SKU: Chamfer Milling MCA130 Weldon