SKU: Turning Inserts(Negative) VNMG Rhombic35°,with Hole 1
Categories: Turning Inserts, TURNING TOOLS
-12%
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) VNMG Rhombic35°,with Hole
Availability:
199 in stock
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
$22.00 $25.00
| Brands | |
|---|---|
| Ordering Code (Turning Inserts(Negative) VNMG Rhombic35°,with Hole 1) | VNMG160402-QF GP1225, VNMG160404-GF GP1115, VNMG160404-GM GP1115, VNMG160404-QF GP1105, VNMG160404-QF GP1115, VNMG160404-QF GP1225, VNMG160404-QM GP1115, VNMG160404-QM GP1120, VNMG160404-QM GP1225, VNMG160404-SF GS3115, VNMG160404-SM GM1125, VNMG160404-SM GM3215, VNMG160404-SM GM3225, VNMG160404-TP GP31TM, VNMG160404-TP GP91TM, VNMG160408-GF GP1115, VNMG160408-GM GP1225, VNMG160408-QF GP1105, VNMG160408-QF GP1115, VNMG160408-QM GP1105, VNMG160408-QM GP1115, VNMG160408-QM GP1120, VNMG160408-QM GP1225, VNMG160408-SF GS3115, VNMG160408-SM GM1125, VNMG160408-SM GM3215, VNMG160408-SM GM3225, VNMG160408-TP GP31TM, VNMG160412-GM GP1115, VNMG160412-GM GP1225, VNMG160412-QM GP1225, VNMG220404-GF GP1115, VNMG220404-QF GP1115, VNMG220408-GF GP1115, VNMG220408-GM GP1225, VNMG220408-QF GP1115 |
| Workpiece Material | |
| Application Range | |
| Units of length |
Based on 0 reviews
Be the first to review “GENERAL TURNING Turning Inserts(Negative) VNMG Rhombic35°,with Hole”
Related products
-
TURNING TOOLS, Turning Inserts
GENERAL TURNING Turning Inserts(Negative) CNMG/CNMA/CNMM Rhombic 80° with Hole
TURNING TOOLS, Turning InsertsGENERAL TURNING Turning Inserts(Negative) CNMG/CNMA/CNMM Rhombic 80° with Hole
- QR For rough machining of carbon steel, cast steel and alloy steel.
- Combination of variable rake angle and variable blade width to meet different cutting depths Cutting edge sharpness and strength requirements;
- HK for cast iron cutting and heavy cutting.
- Strong cutting edge and wide land for improved performance.
- QH For heavy cutting of carbon steel, cast steel and alloy steel.
- Variable edge and step-type chip breaker, low cutting resistance.
- Straight cutting edges and chamfers for cutting sharpness and tip The strength is guaranteed at the same time.
SKU: Turning Inserts(Negative) CNMG/CNMA/CNMM Rhombic 80° with Hole 4 -
TURNING TOOLS, Turning Inserts
GENERAL TURNING Turning Inserts(Negative) SNMG Square 90°,with Hole
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- SV for semi-finishing of general steel and alloy steel.
- Throughout groove and wide chip groove make cutting available in unstable working conditions.
- Long chip groove allows high depth of cuts.
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
SKU: Turning Inserts(Negative) SNMG Square 90°,with Hole 2 -
TURNING TOOLS, Turning Inserts
GENERAL TURNING Turning Inserts(Negative) WNMG Trigon60°,with Hole
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- SV for semi-finishing of general steel and alloy steel.
- Throughout groove and wide chip groove make cutting available in unstable working conditions.
- Long chip groove allows high depth of cuts.
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
- LM For semi-finishing of stainless steel and super alloy.
- Variable rake angle + variable blade width, two-way protection of sharpness and strength certificate.
- Heart-shaped chipbreaker, good chipbreaking effect.
- WMV For general steel, alloy steel, cast iron processing.
- Large chip space and low chip evacuation resistance.
- Excellent cutting sharpness and cutting edge strength.
- Get better surface quality.
SKU: Turning Inserts(Negative) WNMG Trigon60°,with Hole 2 -
TURNING TOOLS, Turning Inserts
GENERAL TURNING Turning Inserts(Negative) SNMG Square 90°,with Hole
- LM For semi-finishing of stainless steel and super alloy.
- Variable rake angle + variable blade width, two-way protection of sharpness and strength
certificate. - UK for machining cast iron.
- Medium cutting edge for unfavorable cutting conditions.
- LR For roughing stainless steel.
- Small rake angle + large blade width, high blade strength.
- Large slot width + shallow slot depth, smooth chip removal.
- QR For rough machining of carbon steel, cast steel and alloy steel.
- Combination of variable rake angle and variable blade width to meet different cutting depths Cutting edge sharpness and strength requirements;
SKU: Turning Inserts(Negative) SNMG Square 90°,with Hole 3
There are no reviews yet.