Gesac
Showing 1–30 of 250 results
-
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Boring Tool Insert Holder SFB
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Boring Tool Insert Holder SFB -
-
-
-
Drilling Tools, Indexable insert drills, Indexable Tools
Brazed deep drill insert GD602 B ZOMR
- Application: Deep hole drilling for general materials Hole dia. : Ø16 ~ 36mm Max. Depth:100xD.
- Advantage: Brazed Multi-edge design, superior hole machining accuracy.
SKU: Brazed deep drill insert GD602 B ZOMR -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Finish Boring Tool FB
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Finish Boring Tool FB -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Finish Boring Tool Insert Holder DPZFB
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable ToolsFinish Boring Tool Insert Holder DPZFB
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Finish Boring Tool Insert Holder DPZFB -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CCET Rhombic80°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) CCET Rhombic80°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CCMT/CCGT Rhombic80°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) CCMT/CCGT Rhombic80°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
SKU: Turning Inserts (Positive) CCMT/CCGT Rhombic80°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CCMT/CCGX Rhombic80°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) CCMT/CCGX Rhombic80°,with Hole
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
- AL for grooved aluminum alloy cutting.
- Large rake angle, high sharpness of blade.
SKU: Turning Inserts (Positive) CCMT/CCGX Rhombic80°,with Hole 3 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CPMT/CCGT Rhombic80°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) CPMT/CCGT Rhombic80°,with Hole
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- Strong tool nose due to flat cutting edge and sharp cutting edge due to double rake angle.
SKU: Turning Inserts (Positive) CCMT/CCGX Rhombic80°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) DCET Rhombic55°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) DCET Rhombic55°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) DCMT/DCGT/DCGX Rhombic55°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) DCMT/DCGT/DCGX Rhombic55°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
- AL for grooved aluminum alloy cutting.
- Large rake angle, high sharpness of blade.
SKU: Turning Inserts (Positive) DCET Rhombic55°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) SCMT/SCGX Square 90°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) SCMT/SCGX Square 90°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
- AL for grooved aluminum alloy cutting.
- Large rake angle, high sharpness of blade.
SKU: Turning Inserts (Positive) SCMT/SCGX Square 90°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) SPMT Square 90°,with Hole
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
SKU: Turning Inserts (Positive) SPMT Square 90°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TCET Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TCET Triangle 60°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) TCET Triangle 60°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TCMT/TCGT Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TCMT/TCGT Triangle 60°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
SKU: Turning Inserts (Positive) TCMT/TCGT Triangle 60°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TPET/TPEH Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TPET/TPEH Triangle 60°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) TPET/TPEH Triangle 60°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TPMT/TPGT Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TPMT/TPGT Triangle 60°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
SKU: Turning Inserts (Positive) TPMT/TPGT Triangle 60°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) VBET/VBMT Rhombic35°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) VBET/VBMT Rhombic35°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
SKU: Turning Inserts (Positive) VBET/VBMT Rhombic35°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) VCET/VCMT/VCGT Rhombic35°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) VCET/VCMT/VCGT Rhombic35°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
SKU: Turning Inserts (Positive) VCET/VCMT/VCGT Rhombic35°,with Hole 1 -
-
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) VPET Rhombic35°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) VPET Rhombic35°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) WCMT Trigon60°,with Hole
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
SKU: Turning Inserts (Positive) WCMT Trigon60°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) CNMG Rhombic 80° with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
SKU: Turning Inserts(Negative) CNMG Rhombic 80° with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) CNMG Rhombic 80° with Hole
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- SV for semi-finishing of general steel and alloy steel.
- Throughout groove and wide chip groove make cutting available in unstable working conditions.
- Long chip groove allows high depth of cuts.
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
SKU: Turning Inserts(Negative) CNMG Rhombic 80° with Hole 2