• DMIN=(min bore diameter)=(DCN+BD+1)/2 • BD=Size of the boring head being used
(1) Suitable boring heads
(2) Cutting diameter minimum (3) Cutting diameter maximum
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
IHSR-BW Back Face Turning Tools for BHR and TCH AL Rough Boring Heads
Availability:
200 in stock
- Back Face Turning Tools for BHR and TCH AL Rough Boring Heads.
Based on 0 reviews
Be the first to review “IHSR-BW Back Face Turning Tools for BHR and TCH AL Rough Boring Heads”
You may also like…
-
Indexable Tools, TURNING TOOLS, Turning Inserts
CCMT-PF 80° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
Indexable Tools, TURNING TOOLS, Turning InsertsCCMT-PF 80° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
- 80° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys.
SKU: CCMT-PF 80° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys -
Indexable Tools, TURNING TOOLS, Turning Inserts
CCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
Indexable Tools, TURNING TOOLS, Turning InsertsCCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
- Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys.
SKU: CCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys -
Indexable Tools, TURNING TOOLS, Turning Inserts
CCGT-AS 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
Indexable Tools, TURNING TOOLS, Turning InsertsCCGT-AS 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
- 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum.
SKU: CCGT-AS 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
There are no reviews yet.