• The drill tip is supplied in a grade that is suitable to machine the material group indicated in the drill head designation: ISO P, K, M, N materials
• Ordering example: DSD-E343.30 DT-PO.
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Number of thread starts
(4) Tube designation
BTA deep hole drill, Drilling Tools, Indexable Tools
DSD-E2/E3 Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (12.6-65 dia.)
Availability:
200 in stock
- Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (12.6-65 dia.).
- Single Tube System (STS) Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
Based on 0 reviews
Be the first to review “DSD-E2/E3 Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (12.6-65 dia.)”
You may also like…
-
Indexable Tools, Drilling Tools, BTA deep hole drill
TS-I** Drill Tubes – STS System – Inner 4 Start Thread Connection
Indexable Tools, Drilling Tools, BTA deep hole drillTS-I** Drill Tubes – STS System – Inner 4 Start Thread Connection
- Drill Tubes – STS System – Inner 4 Start Thread Connection.
- Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: TS-I** Drill Tubes - STS System - Inner 4 Start Thread Connection
There are no reviews yet.