* Optional, should be ordered separately
Boring Bars, Indexable Tools, TURNING TOOLS
AVC-DDUNR/L Interchangeable Boring Heads for 55° Rhombic Inserts
Availability:
200 in stock
- Interchangeable Boring Heads for 55° Rhombic Inserts.
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “AVC-DDUNR/L Interchangeable Boring Heads for 55° Rhombic Inserts” Cancel reply
You may also like…
-
Indexable Tools, TURNING TOOLS, Turning Inserts
DNMG-NR Double-Sided 55° Rhombic Inserts with a Special Chipformer for Heavy Machining
Indexable Tools, TURNING TOOLS, Turning InsertsDNMG-NR Double-Sided 55° Rhombic Inserts with a Special Chipformer for Heavy Machining
0 out of 5(0)- Double-Sided 55° Rhombic Inserts with a Special Chipformer for Heavy Machining.
SKU: DNMG-NR Double-Sided 55° Rhombic Inserts with a Special Chipformer for Heavy Machining -
Indexable Tools, TURNING TOOLS, Turning Inserts
DNMG-M3P Double-Sided 55° Rhombic Inserts for Medium Machining Conditions on Steel
Indexable Tools, TURNING TOOLS, Turning InsertsDNMG-M3P Double-Sided 55° Rhombic Inserts for Medium Machining Conditions on Steel
0 out of 5(0)- Double-Sided 55° Rhombic Inserts for Medium Machining Conditions on Steel.
SKU: DNMG-M3P Double-Sided 55° Rhombic Inserts for Medium Machining Conditions on Steel -
Indexable Tools, TURNING TOOLS, Turning Inserts
DNMA Double-Sided 55° Rhombic Inserts for Short Chipping Materials such as Cast Iron
Indexable Tools, TURNING TOOLS, Turning InsertsDNMA Double-Sided 55° Rhombic Inserts for Short Chipping Materials such as Cast Iron
0 out of 5(0)- Double-Sided 55° Rhombic Inserts for Short Chipping Materials such as Cast Iron.
SKU: DNMA Double-Sided 55° Rhombic Inserts for Short Chipping Materials such as Cast Iron -
Indexable Tools, TURNING TOOLS, Turning Inserts
DNMG/DNGG-SF Double-Sided 55° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut
Indexable Tools, TURNING TOOLS, Turning InsertsDNMG/DNGG-SF Double-Sided 55° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut
0 out of 5(0)- Double-Sided 55° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut.
SKU: DNMG/DNGG-SF Double-Sided 55° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ10/12/16 Micro-boring head
0 out of 5(0)- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°,for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: DBJ10/12/16 Micro-boring head$10.00 – $13.00 -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
NBH2084 Micro-Boring Tool Kit
0 out of 5(0)- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°,for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: NBH2084 Micro-Boring Tool Kit$80.00 – $130.00
There are no reviews yet.