Steel (P)
Showing 1201–1230 of 1340 results
-
-
Indexable Tools, Milling Inserts, Milling Tools
T465 LNHT/LNMT 2212 Milling Inserts
- HELITANG T465 Line, tangentially clamped inserts with 4 cutting edges.
- Used on 65° cutters, for up to 19 mm depth of cut.
- The insert has a positive rake and axial angles and a 2.5 mm flat wiper for high surface finish.
SKU: T465 LNHT/LNMT 2212 Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
T490 LNAR 0804/1306/1607PN Milling Inserts
- HELITANG – Tangentially clamped, precision ground inserts with 4 helical cutting edges and a super positive rake for machining aluminum.
- For T490 ELN-13 on diameter 25 mm at ap=5, fz=0.15 at ap=10, fz=0.1.
SKU: T490 LNAR 0804/1306/1607PN Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
T490 LNAT/LNMT/LNHT 1306 Milling Inserts
- HELITANG – Tangentially clamped inserts with 4 helical cutting edges.
- The unique pocket design prevents insert pull-out and enables tools with larger core diameters compared with regular radially orientated inserts.
SKU: T490 LNAT/LNMT/LNHT 1306 Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
T490 LNMT 1306PNR-FF Milling Inserts
- Tangentially clamped inserts with 2 cutting edges for fast feed milling.
- The two cutting edges can be identified by their black surface treated rake face.
- Do not use the bottom golden color side, it will not cut the material properly.
SKU: T490 LNMT 1306PNR-FF Milling Inserts -
-
Indexable Tools, Milling Inserts, Milling Tools
T490 LNMT/LNHT 0804 Milling Inserts
- HELITANG – Tangentially clamped inserts with 4 helical cutting edges.
- The unique pocket design, prevents insert pull-out and enables tools with larger core diameters compared with regular radially orientated inserts.
- LNMT-utility inserts, LNHT-precision inserts.
SKU: T490 LNMT/LNHT 0804 Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
T490 LNMT/LNHT 1106 Milling Inserts
-
HELITANG – Tangentially clamped inserts with 4 helical cutting edges.
-
The unique pocket design prevents insert pull-out and enables tools with larger core diameters compared with regular radially orientated inserts.
SKU: T490 LNMT/LNHT 1106 Milling Inserts -
-
-
-
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications
- Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: TAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications
- Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
- Larger corner radii for interrupted cut and high feed applications.
- Similar to C-type, but with a modified edge; improved chip control at medium feeds.
- Cutting width tolerance (+/-).
SKU: TAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-HF Single-Ended Inserts for High Feed Parting & Grooving, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-HF Single-Ended Inserts for High Feed Parting & Grooving, Hard Materials and Tough Applications
- Single-Ended Inserts for High Feed Parting and Grooving, Hard Materials and Tough Applications.
SKU: TAG N-HF Single-Ended Inserts for High Feed Parting & Grooving, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-J/JS/JT Single-Ended Inserts for Parting, Grooving and Slitting Soft Materials
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-J/JS/JT Single-Ended Inserts for Parting, Grooving and Slitting Soft Materials
- Single-Ended Inserts for Parting, Grooving and Slitting Soft Materials.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low-to-medium feeds.
- Cutting width tolerance (+/-).
- Corner radius tolerance (+/-).
SKU: TAG N-J/JS/JT Single-Ended Inserts for Parting, Grooving and Slitting Soft Materials -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-LF Single-Ended Inserts for Parting, Grooving and Slitting Stainless Steel
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-LF Single-Ended Inserts for Parting, Grooving and Slitting Stainless Steel
- Single-Ended Inserts for Parting, Grooving and Slitting Stainless Steel.
SKU: TAG N-LF Single-Ended Inserts for Parting, Grooving and Slitting Stainless Steel -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-MF Single-Ended Inserts for Parting, Grooving and Slitting Stainless and Alloy Steel at Medium Feed
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-MF Single-Ended Inserts for Parting, Grooving and Slitting Stainless and Alloy Steel at Medium Feed
- Single-Ended Inserts for Parting Grooving and Slitting Stainless and Alloy Steel at Medium Feed.
SKU: TAG N-MF Single-Ended Inserts for Parting, Grooving and Slitting Stainless and Alloy Steel at Medium Feed -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-UT Single-Sided Inserts for Parting, Grooving & Slitting at Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-UT Single-Sided Inserts for Parting, Grooving & Slitting at Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel
- Single-Sided Inserts for Parting, Grooving & Slitting at Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel.
SKU: TAG N-UT Single-Sided Inserts for Parting, Grooving & Slitting at Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG R/L-C Single-Ended Inserts for Parting Bars, Hard Materials and Tough Parting Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG R/L-C Single-Ended Inserts for Parting Bars, Hard Materials and Tough Parting Applications
- Single-Ended Inserts for Parting Bars, Hard Materials and Tough Parting Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: TAG R/L-C Single-Ended Inserts for Parting Bars, Hard Materials and Tough Parting Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG R/L-J/JS TANG-GRIP Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG R/L-J/JS TANG-GRIP Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
- TANG-GRIP Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts.
SKU: TAG R/L-J/JS TANG-GRIP Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAGB/TAGBA Single-Ended Utility Inserts for Grooving, Turning and Parting
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAGB/TAGBA Single-Ended Utility Inserts for Grooving, Turning and Parting
- Single-Ended Utility Inserts for Grooving, Turning and Parting.
- H-type chipformer with a negative T-land for machining heavy interrupted applications and cast iron parts.
SKU: TAGB/TAGBA Single-Ended Utility Inserts for Grooving, Turning and Parting -
Indexable Tools, Turning Inserts, TURNING TOOLS
TCMT-F3P Triangular Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel
Indexable Tools, Turning Inserts, TURNING TOOLSTCMT-F3P Triangular Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel
- Triangular Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel.
SKU: TCMT-F3P Triangular Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
TCMT-PF Triangular Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSTCMT-PF Triangular Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
- Triangular Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys.
SKU: TCMT-PF Triangular Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
TCMT-SM Triangular Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSTCMT-SM Triangular Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
- Triangular Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys.
SKU: TCMT-SM Triangular Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TGMF (full radius) Utility Double-Ended Full Radius Inserts for External and Internal Grooving and Profiling
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTGMF (full radius) Utility Double-Ended Full Radius Inserts for External and Internal Grooving and Profiling
- Utility Double-Ended Full Radius Inserts for External and Internal Grooving and Profiling.
- Can cut arcs to 250°.
- DMIN for internal application=20.5 mm.
SKU: TGMF (full radius) Utility Double-Ended Full Radius Inserts for External and Internal Grooving and Profiling -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TGMF/P Utility Double-Ended Inserts for External and Internal Grooving and Turning
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTGMF/P Utility Double-Ended Inserts for External and Internal Grooving and Turning
- Utility Double-Ended Inserts for External and Internal Grooving and Turning.
- DMIN for internal application=20.5 mm.
SKU: TGMF/P Utility Double-Ended Inserts for External and Internal Grooving and Turning -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TIGER Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTIGER Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining
- Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining.
SKU: TIGER Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TIGER-IQ Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTIGER-IQ Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining
- Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining.
SKU: TIGER-IQ Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TIGERV Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTIGERV Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining
- Utility single-ended inserts for external deep grooving and heavy machining.
SKU: TIGERV Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining -
Indexable Tools, Threading Inserts, THREADING TOOLS
TIP-MT Precision Ground Double-Ended Threading Inserts with a 60° Partial Profile and Chipformer
Indexable Tools, Threading Inserts, THREADING TOOLSTIP-MT Precision Ground Double-Ended Threading Inserts with a 60° Partial Profile and Chipformer
- Precision Ground Double-Ended Threading Inserts with a 60° Partial Profile and Chipformer.
- TIP inserts are 1.6 mm longer than GIP in the same pocket.
- Toolholder seat needs to be modified according to insert profile to ensure clearance.
SKU: TIP-MT Precision Ground Double-Ended Threading Inserts with a 60° Partial Profile and Chipformer
