Steel (P)
Showing 1141–1170 of 1340 results
-
Indexable Tools, Turning Inserts, TURNING TOOLS
SNMG-R3M Double-Sided 90° Square Inserts for Rough Machining on Stainless and Low Carbon Steel
Indexable Tools, Turning Inserts, TURNING TOOLSSNMG-R3M Double-Sided 90° Square Inserts for Rough Machining on Stainless and Low Carbon Steel
- Double-Sided 90° Square Inserts for Rough Machining on Stainless and Low Carbon Steel.
SKU: SNMG-R3M Double-Sided 90° Square Inserts for Rough Machining on Stainless and Low Carbon Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
SNMG-TF Double-Sided Square Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions
Indexable Tools, Turning Inserts, TURNING TOOLSSNMG-TF Double-Sided Square Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions
- Double-Sided Square Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions.
SKU: SNMG-TF Double-Sided Square Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions -
Indexable Tools, Turning Inserts, TURNING TOOLS
SNMG-VL Double-Sided Square Insert with a Chipformer for High Temperature Alloys and Stainless Steel Valves
Indexable Tools, Turning Inserts, TURNING TOOLSSNMG-VL Double-Sided Square Insert with a Chipformer for High Temperature Alloys and Stainless Steel Valves
- Double-Sided Square Insert with a Chipformer for High Temperature Alloys and Stainless Steel Valves.
SKU: SNMG-VL Double-Sided Square Insert with a Chipformer for High Temperature Alloys and Stainless Steel Valves -
Indexable Tools, Turning Inserts, TURNING TOOLS
SNMX 150708R-.. Pipe Skiving Inserts with a Positive Rake Used to Remove the Burr of Welded Tubes
Indexable Tools, Turning Inserts, TURNING TOOLSSNMX 150708R-.. Pipe Skiving Inserts with a Positive Rake Used to Remove the Burr of Welded Tubes
- Pipe Skiving Inserts with a Positive Rake Used to Remove the Burr of Welded Tubes.
SKU: SNMX 150708R-.. Pipe Skiving Inserts with a Positive Rake Used to Remove the Burr of Welded Tubes -
Drilling Tools, Indexable insert drills, Indexable Tools
SOGT-W Precision Ground Inserts for MNC Drills with DT General Use Chipformer and a Wiper
Drilling Tools, Indexable insert drills, Indexable ToolsSOGT-W Precision Ground Inserts for MNC Drills with DT General Use Chipformer and a Wiper
- Precision Ground Inserts with DT General Use Chipformer and a Wiper for MNC Drills.
SKU: SOGT-W Precision Ground Inserts for MNC Drills with DT General Use Chipformer and a Wiper -
Drilling Tools, Indexable insert drills, Indexable Tools
SOGX-W Precision Ground Inserts for MNC Drills with DT General Use Chipformer and a Wiper
Drilling Tools, Indexable insert drills, Indexable ToolsSOGX-W Precision Ground Inserts for MNC Drills with DT General Use Chipformer and a Wiper
- Precision ground inserts with DT general use chipformer and a wiper, for MNC large diameter drills.
SKU: SOGX-W Precision Ground Inserts for MNC Drills with DT General Use Chipformer and a Wiper -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D918-A3C 3D Inner Cooling Twist Drills for General Purpose
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D918-A3C 3D Inner Cooling Twist Drills for General Purpose
- Suitable for drilling steel, stainless steel, cast iron, non-ferrous material.
- Stub chisel, excellent self-center capability.
- curve point, smaller cutting resistance.
- Lip chamfer, higher feed rate, higher efficiency.
SKU: SOLID CARBIDE DRILLS D918-A3C 3D Inner Cooling Twist Drills for General Purpose -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D918-A3N 3D External Cooling Twist Drills for General Purpose
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D918-A3N 3D External Cooling Twist Drills for General Purpose
- Suitable for drilling steel, stainless steel, cast iron, non-ferrous material.
- Stub chisel, excellent self-center capability.
- curve point, smaller cutting resistance.
- Lip chamfer, higher feed rate, higher efficiency.
SKU: SOLID CARBIDE DRILLS D918-A3N 3D External Cooling Twist Drills for General Purpose -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D918-A5C 5D Inner Cooling Twist Drills for General Purpose
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D918-A5C 5D Inner Cooling Twist Drills for General Purpose
- Suitable for drilling steel, stainless steel, cast iron, non-ferrous material.
- Stub chisel, excellent self-center capability.
- curve point, smaller cutting resistance.
- Lip chamfer, higher feed rate, higher efficiency.
SKU: SOLID CARBIDE DRILLS D918-A5C 5D Inner Cooling Twist Drills for General Purpose -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D918-A5N 5D External Cooling Twist Drills for General Purpose
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D918-A5N 5D External Cooling Twist Drills for General Purpose
- Suitable for drilling steel, stainless steel, cast iron, non-ferrous material.
- Stub chisel, excellent self-center capability.
- curve point, smaller cutting resistance.
- Lip chamfer, higher feed rate, higher efficiency.
SKU: SOLID CARBIDE DRILLS D918-A5N 5D External Cooling Twist Drills for General Purpose -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D928-A3C 3D Inner Cooling Twist Drills for Cast Iron
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D928-A3C 3D Inner Cooling Twist Drills for Cast Iron
- Suitable for drilling cast iron of automobile industry and other industries.
- Wave formed cutting lips provides lowered machining torque.
- Four margin design, improves hole wall quality and accuracy.
- Increased Drills point strength through optimized chisel edge.
SKU: SOLID CARBIDE DRILLS D928-A3C 3D Inner Cooling Twist Drills for Cast Iron -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D928-A3N 3D External Cooling Twist Drills for Cast Iron
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D928-A3N 3D External Cooling Twist Drills for Cast Iron
- Suitable for drilling cast iron of automobile industry and other industries.
- Wave formed cutting lips provides lowered machining torque.
- Four margin design, improves hole wall quality and accuracy.
- Increased Drills point strength through optimized chisel edge.
SKU: SOLID CARBIDE DRILLS D928-A3N 3D External Cooling Twist Drills for Cast Iron -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D928-A5C 5D Inner Cooling Twist Drills for Cast Iron
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D928-A5C 5D Inner Cooling Twist Drills for Cast Iron
- Suitable for drilling cast iron of automobile industry and other industries.
- Wave formed cutting lips provides lowered machining torque.
- Four margin design, improves hole wall quality and accuracy.
- Increased Drills point strength through optimized chisel edge.
SKU: SOLID CARBIDE DRILLS D928-A5C 5D Inner Cooling Twist Drills for Cast Iron -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D928-A5N 5D External Cooling Twist Drills for Cast Iron
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D928-A5N 5D External Cooling Twist Drills for Cast Iron
- Suitable for drilling cast iron of automobile industry and other industries.
- Wave formed cutting lips provides lowered machining torque.
- Four margin design, improves hole wall quality and accuracy.
- Increased Drills point strength through optimized chisel edge.
SKU: SOLID CARBIDE DRILLS D928-A5N 5D External Cooling Twist Drills for Cast Iron -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D938-A3C 3D Inner Cooling Twist Drills for Steel
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D938-A3C 3D Inner Cooling Twist Drills for Steel
- Suitable for drilling Steel（≤48HRC）, Cast Iron.
- Unique cutting edge preparation to add strength to the cutting edge, and improve the drilling stability.
- New AlTiN-nano coating, superior wear resistance, longer tool life.
- Straight cutting edge, improves tool strength.
SKU: SOLID CARBIDE DRILLS D938-A3C 3D Inner Cooling Twist Drills for Steel -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D938-A3N 3D External Cooling Twist Drills for Steel
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D938-A3N 3D External Cooling Twist Drills for Steel
- Suitable for drilling Steel（≤48HRC）, Cast Iron.
- Unique cutting edge preparation to add strength to the cutting edge, and improve the drilling stability.
- New AlTiN-nano coating, superior wear resistance, longer tool life.
- Straight cutting edge, improves tool strength.
SKU: SOLID CARBIDE DRILLS D938-A3N 3D External Cooling Twist Drills for Steel -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D938-A5C 5D Inner Cooling Twist Drills for Steel
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D938-A5C 5D Inner Cooling Twist Drills for Steel
- Suitable for drilling Steel（≤48HRC）, Cast Iron.
- Unique cutting edge preparation to add strength to the cutting edge, and improve the drilling stability.
- New AlTiN-nano coating, superior wear resistance, longer tool life.
- Straight cutting edge, improves tool strength.
SKU: SOLID CARBIDE DRILLS D938-A5C 5D Inner Cooling Twist Drills for Steel -
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D938-A5N 5D External Cooling Twist Drills for Steel
DRILLING, JOBBER（4D-7D）, Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D938-A5N 5D External Cooling Twist Drills for Steel
- Suitable for drilling Steel（≤48HRC）, Cast Iron.
- Unique cutting edge preparation to add strength to the cutting edge, and improve the drilling stability.
- New AlTiN-nano coating, superior wear resistance, longer tool life.
- Straight cutting edge, improves tool strength.
SKU: SOLID CARBIDE DRILLS D938-A5N 5D External Cooling Twist Drills for Steel
