Stainless Steel (M)
Showing 91–120 of 1235 results
-
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
Boring millers XMP01
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsBoring millers XMP01
- Diameter range Ø80-Ø400.
- Inserts are vertically loaded with 90 degrees approach angle. Both axial and radical cutting width could be adjusted according to customers’ demands. Opened chip pocket, which lead to unobstructed chip removal. It has large width of bottom edges, which helps to strengthen the capability of helical interpolation milling holes. It is generally loaded inserts for two kinds chipbreaker, while fits for different machining conditions.
SKU: Boring millers XMP01 -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Boring Tool Insert Holder SFB
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Boring Tool Insert Holder SFB -
-
-
-
Drilling Tools, Indexable insert drills, Indexable Tools
Brazed deep drill insert GD602 B ZOMR
- Application: Deep hole drilling for general materials Hole dia. : Ø16 ~ 36mm Max. Depth:100xD.
- Advantage: Brazed Multi-edge design, superior hole machining accuracy.
SKU: Brazed deep drill insert GD602 B ZOMR -
Indexable Tools, Thread turning, THREADING TOOLS
British standard taper pipe threading insert (thin type) for external threading(inch)
Indexable Tools, Thread turning, THREADING TOOLSBritish standard taper pipe threading insert (thin type) for external threading(inch)
- Specially treated edge for superior surface quality.
- Sharp nose with small cutting resistance and superior performance.
- Full ground inserts with high dimensional precision for high quality threading.
SKU: British standard taper pipe threading insert (thin type) for external threading(inch) -
Indexable Tools, Thread turning, THREADING TOOLS
British standard taper pipe threading insert (thin type) for internal threading(inch)
Indexable Tools, Thread turning, THREADING TOOLSBritish standard taper pipe threading insert (thin type) for internal threading(inch)
- Specially treated edge for superior surface quality.
- Sharp nose with small cutting resistance and superior performance.
- Full ground inserts with high dimensional precision for high quality threading.
SKU: British standard taper pipe threading insert (thin type) for internal threading(inch) -
Indexable Tools, Thread turning, THREADING TOOLS
British standard taper pipe threading insert for external threading(inch)
Indexable Tools, Thread turning, THREADING TOOLSBritish standard taper pipe threading insert for external threading(inch)
- Specially treated edge for superior surface quality.
- Sharp nose with small cutting resistance and superior performance.
- Full ground inserts with high dimensional precision for high quality threading.
SKU: British standard taper pipe threading insert for external threading(inch) -
Indexable Tools, Thread turning, THREADING TOOLS
British standard taper pipe threading insert for internal threading(inch)
Indexable Tools, Thread turning, THREADING TOOLSBritish standard taper pipe threading insert for internal threading(inch)
- Specially treated edge for superior surface quality.
- Sharp nose with small cutting resistance and superior performance.
- Full ground inserts with high dimensional precision for high quality threading.
SKU: British standard taper pipe threading insert for internal threading(inch) -
Indexable Tools, Thread milling, THREADING TOOLS
Carbide Milling Heads MT-ISO-MM
- Carbide milling heads with a threaded (MULTI-MASTER) connection for internal ISO metric thread.
- Description and dimensions relate to the new products with clamping flats.
- There is a possibility that the customer will receive the old item (with TORX) until the stock is depleted.
- Do not apply lubricant to the threaded connection.
- For thread milling heads with 12 mm diameter and larger use Torx clamping keys.
- Thread pitch.
- Number of flutes.
SKU: Carbide Milling Heads MT-ISO-MM -
Indexable Tools, Thread milling, THREADING TOOLS
Carbide Milling Heads MT-UN-MM
- Carbide milling heads with a threaded (MULTI-MASTER) connection for internal UN thread profile.
- Description and dimensions relate to the new products with clamping flats.
- There is a possibility that the customer will receive the old item (with TORX) until the stock is depleted.
- Do not apply lubricant to the threaded connection.
- For thread milling heads with 12 mm diameter and larger use Torx clamping keys.
SKU: Carbide Milling Heads MT-UN-MM -
Indexable Tools, Thread milling, THREADING TOOLS
Carbide Milling Heads MT-W-MM
- Carbide milling heads with a threaded (MULTI-MASTER) connection for internal and external 55° BSW thread profile.
- Description and dimensions relate to the new products with clamping flats.
- There is a possibility that the customer will receive the old item (with TORX) until the stock is depleted.
- Do not apply lubricant to the threaded connection.
- For thread milling heads with 12 mm diameter and larger use Torx clamping keys.
SKU: Carbide Milling Heads MT-W-MM -
Indexable Tools, Turning Inserts, TURNING TOOLS
CC95MT-SM Single-Sided 80° Rhombic Inserts for Finishing (CHAMELEON Multifunction Pocket System
Indexable Tools, Turning Inserts, TURNING TOOLSCC95MT-SM Single-Sided 80° Rhombic Inserts for Finishing (CHAMELEON Multifunction Pocket System
- Single-Sided 80° Rhombic Inserts for Finishing (CHAMELEON Multifunction Pocket System).
SKU: CC95MT-SM Single-Sided 80° Rhombic Inserts for Finishing (CHAMELEON Multifunction Pocket System -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCET-WF 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
Indexable Tools, Turning Inserts, TURNING TOOLSCCET-WF 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
- 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing.
SKU: CCET-WF 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCGT-F1P 80° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCCGT-F1P 80° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel
- 80° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel.
SKU: CCGT-F1P 80° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
- 80° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning.
SKU: CCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-CERMET Single-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-CERMET Single-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
- Single-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications.
SKU: CCMT-CERMET Single-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-F3P 80° Rhombic Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-F3P 80° Rhombic Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel
- 80° Rhombic Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel.
SKU: CCMT-F3P 80° Rhombic Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-M3M 80° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-M3M 80° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel
- 80° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel.
SKU: CCMT-M3M 80° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-PF 80° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-PF 80° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
- 80° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys.
SKU: CCMT-PF 80° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
- 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing.
SKU: CCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
- Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys.
SKU: CCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys -