Stainless Steel (M)
Showing 61–77 of 77 results
-
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Micro-boring Tool SFB
- Fine boring operations are performed to complete an existing hole and to achieve a close hole tolerance and correct positioning with high quality surface finish.
- Machining is carried out with small cutting depths, generally below 0.5 mm (0.020 inch).
- Single-edge boring is used for finishing operations with small cutting depths when close tolerance (IT6 to IT8) or high quality surface finish is required.
- The diameter of a fine boring tool can be adjusted within microns with a high precision mechanism.
- Single-edge boring can be applied with a rough boring tool for finishing of holes with tolerances of IT9 or larger.
SKU: Micro-boring Tool SFB -
Boring and Reaming Tools, Indexable Tools, Rough boring tools
Rough Boring Tool DRB
- Roughing is primarily focused on metal removal and is performed to open up an existing hole made by methods such as pre-machining, casting or forging.
- Rough boring prepares the hole for finishing.
- For optimized boring, general boring, large diameter- and lightweight boring see the selection of tools, presented below in the overview.
- To eliminate vibration when machining with long overhangs, damped tools are available.
SKU: Rough Boring Tool DRB -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Rough Boring Tool Insert Holder DZA/DZB
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable ToolsRough Boring Tool Insert Holder DZA/DZB
- Roughing is primarily focused on metal removal and is performed to open up an existing hole made by methods such as pre-machining, casting or forging.
- Rough boring prepares the hole for finishing.
- For optimized boring, general boring, large diameter- and lightweight boring see the selection of tools, presented below in the overview.
- To eliminate vibration when machining with long overhangs, damped tools are available.
SKU: Rough Boring Tool Insert Holder DZA/DZB -
Boring and Reaming Tools, Indexable Tools, Rough boring tools
Rough Boring Tool RB
- Roughing is primarily focused on metal removal and is performed to open up an existing hole made by methods such as pre-machining, casting or forging.
- Rough boring prepares the hole for finishing.
- For optimized boring, general boring, large diameter- and lightweight boring see the selection of tools, presented below in the overview.
- To eliminate vibration when machining with long overhangs, damped tools are available.
SKU: Rough Boring Tool RB -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D573-Y3N Core Drills for Composite and Metal
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D573-Y3N Core Drills for Composite and Metal
- Suitable for manual reaming of CFRP / GFRP and metal Laminates.
- Suitable for aviation aluminum, titanium alloy, stainless steel met-al materials.
- Three-blade structure and drill tip design to increase processing stability.
- Recommended with the use of drilling sleeve.
- Hole tolerance:+/-0.025mm(+/-0.001 ").
SKU: SOLID CARBIDE DRILLS D573-Y3N Core Drills for Composite and Metal -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D918-A3C 3D Inner Cooling Twist Drills for General Purpose
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D918-A3C 3D Inner Cooling Twist Drills for General Purpose
- Suitable for drilling steel, stainless steel, cast iron, non-ferrous material.
- Stub chisel, excellent self-center capability.
- curve point, smaller cutting resistance.
- Lip chamfer, higher feed rate, higher efficiency.
SKU: SOLID CARBIDE DRILLS D918-A3C 3D Inner Cooling Twist Drills for General Purpose -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D918-A3N 3D External Cooling Twist Drills for General Purpose
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D918-A3N 3D External Cooling Twist Drills for General Purpose
- Suitable for drilling steel, stainless steel, cast iron, non-ferrous material.
- Stub chisel, excellent self-center capability.
- curve point, smaller cutting resistance.
- Lip chamfer, higher feed rate, higher efficiency.
SKU: SOLID CARBIDE DRILLS D918-A3N 3D External Cooling Twist Drills for General Purpose -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D918-A5C 5D Inner Cooling Twist Drills for General Purpose
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D918-A5C 5D Inner Cooling Twist Drills for General Purpose
- Suitable for drilling steel, stainless steel, cast iron, non-ferrous material.
- Stub chisel, excellent self-center capability.
- curve point, smaller cutting resistance.
- Lip chamfer, higher feed rate, higher efficiency.
SKU: SOLID CARBIDE DRILLS D918-A5C 5D Inner Cooling Twist Drills for General Purpose -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D918-A5N 5D External Cooling Twist Drills for General Purpose
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D918-A5N 5D External Cooling Twist Drills for General Purpose
- Suitable for drilling steel, stainless steel, cast iron, non-ferrous material.
- Stub chisel, excellent self-center capability.
- curve point, smaller cutting resistance.
- Lip chamfer, higher feed rate, higher efficiency.
SKU: SOLID CARBIDE DRILLS D918-A5N 5D External Cooling Twist Drills for General Purpose -
JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D938-A8C 8D Inner Cooling Twist Drills for Steel
JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D938-A8C 8D Inner Cooling Twist Drills for Steel
- Suitable for drilling Steel(≤48HRC), Cast Iron.
- Unique cutting edge preparation to add strength to the cutting edge, and improve the drilling stability.
- New AlTiN-nano coating, superior wear resistance, longer tool life.
- Straight cutting edge, improves tool strength.
SKU: SOLID CARBIDE DRILLS D938-A8C 8D Inner Cooling Twist Drills for Steel -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D968-A3C 3D Inner Cooling Twist Drills for Stainless Steel
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D968-A3C 3D Inner Cooling Twist Drills for Stainless Steel
- Suitable for drilling stainless steel
- Excellent edge strength and excellent self-center capability.
- Straight lips, precise edge preparation is adapted, reinforce the strength of edge.
- Small edge home, largeblack taper, reduces friction and tor-que impaction.
SKU: SOLID CARBIDE DRILLS D968-A3C 3D Inner Cooling Twist Drills for Stainless Steel -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D968-A5C 5D Inner Cooling Twist Drills for Stainless Steel
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D968-A5C 5D Inner Cooling Twist Drills for Stainless Steel
- Suitable for drilling stainless steel
- Excellent edge strength and excellent self-center capability.
- Straight lips, precise edge preparation is adapted, reinforce the strength of edge.
- Small edge home, largeblack taper, reduces friction and tor-que impaction.
SKU: SOLID CARBIDE DRILLS D968-A5C 5D Inner Cooling Twist Drills for Stainless Steel -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D968S-A3N 3D External Cooling Twist Drills for Stainless Steel
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D968S-A3N 3D External Cooling Twist Drills for Stainless Steel
- Suitable for drilling stainless steel
- Excellent edge strength and excellent self-center capability.
- Straight lips, precise edge preparation is adapted, reinforce the strength of edge.
- Small edge home, largeblack taper, reduces friction and tor-que impaction.
SKU: SOLID CARBIDE DRILLS D968S-A3N 3D External Cooling Twist Drills for Stainless Steel -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS D973-Y5N Twist Drills for Composite and Metal
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS D973-Y5N Twist Drills for Composite and Metal
- Suitable for carbon fiber / glass fiber reinforced plastic and metal laminated board material manual hole.
- Suitable for aviation aluminum, titanium alloy, stainless steel metal materials.
- Double edge and self centering design increases process stability.
- Hole tolerance:+/-0.025mm(+/-0.001 ").
- Unique tip design reduces export burrs.
- Recommended with the use of drilling sleeve.
SKU: SOLID CARBIDE DRILLS D973-Y5N Twist Drills for Composite and Metal -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
SOLID CARBIDE DRILLS R733-CM Reamer for Composite and Metal
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)SOLID CARBIDE DRILLS R733-CM Reamer for Composite and Metal
- Suitable for high precision manual reaming of CFRP / GFRP and metal laminates.
- Suitable for hole geometric accuracy and processing roughness demanding reaming.
- Double Steps design can effectively increase the scope of application.
- Hole tolerance: +/- 0.010mm.
SKU: SOLID CARBIDE DRILLS R733-CM Reamer for Composite and Metal