Shop
Showing 7321–7350 of 7424 results
-
Drilling Tools, Indexable Tools, Inserts
XCGT-DT Inserts used on Chamfering Drill Holders for Chamfering and Drilling in One Operation
Drilling Tools, Indexable Tools, InsertsXCGT-DT Inserts used on Chamfering Drill Holders for Chamfering and Drilling in One Operation
- Inserts used on Chamfering Drill Holders for Chamfering and Drilling in One Operation.
SKU: XCGT-DT Inserts used on Chamfering Drill Holders for Chamfering and Drilling in One Operation -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
XCMT-MF Inserts for DR-MF Multifunction Tools with Two Cutting Edges for Hard Materials and Interrupted Cut
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsXCMT-MF Inserts for DR-MF Multifunction Tools with Two Cutting Edges for Hard Materials and Interrupted Cut
- Inserts for DR-MF multifunction tools.
- Two cutting edges for hard materials and interrupted cut.
- Low cutting forces due to high cutting edges and positive angles.
SKU: XCMT-MF Inserts for DR-MF Multifunction Tools with Two Cutting Edges for Hard Materials and Interrupted Cut -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
XCMT-MG Two Cutting Edged Internal Grooving Inserts for DR-MF Multifunction Tools
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsXCMT-MG Two Cutting Edged Internal Grooving Inserts for DR-MF Multifunction Tools
- Two Cutting Edged Internal Grooving Inserts for DR-MF Multifunction Tools.
SKU: XCMT-MG Two Cutting Edged Internal Grooving Inserts for DR-MF Multifunction Tools -
Indexable Tools, Milling Tools, Shoulder milling tools
XNK-XN13 Extended Flute Endmills Carrying XNMU 1306… Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsXNK-XN13 Extended Flute Endmills Carrying XNMU 1306… Inserts
- Extended flute endmills carrying XNMU 1306… inserts.
- Radial W.O.C. < 0.3xD.
- Number of flutes.
- Number of inserts.
- W-Weldon.
SKU: XNK-XN13 Extended Flute Endmills Carrying XNMU 1306... Inserts -
Broaching tool, Gear cutter and Broaching tool, Indexable Tools
XNUWB (light fit) DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines
Broaching tool, Gear cutter and Broaching tool, Indexable ToolsXNUWB (light fit) DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines
- DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines.
- Typical conditions: Vc = 4000-8000 mm/min, ap = 0.02-0.08 mm.
SKU: XNUWB (light fit) DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines -
Broaching tool, Gear cutter and Broaching tool, Indexable Tools
XNUWB (tight fit) DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines
Broaching tool, Gear cutter and Broaching tool, Indexable ToolsXNUWB (tight fit) DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines
- DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines.
SKU: XNUWB (tight fit) DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines -
Broaching tool, Gear cutter and Broaching tool, Indexable Tools
XNUWB DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines
Broaching tool, Gear cutter and Broaching tool, Indexable ToolsXNUWB DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines
- DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines.
- Typical conditions: Vc = 4000-8000 mm/min, ap = 0.02-0.08 mm.
SKU: XNUWB DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines -
Forming, Solid round tools, TAPPING
Yellow Titanium American Forming Tap Tapping Fine Teeth
- Tap features: Chipless processing.
- Strengthens the strength of the tooth being tapped.
- The strength of the tap itself is good.
- Higher product pass rate.
- Longer service life.
- Higher production efficiency.
- Thread standard: JS (Japanese standard).
- Tapping material: Powder high speed steel.
- Invalid teeth: 2P/4P.
- Applicable processing environment: through hole/blind hole.
- Forming taps are formed by the extrusion flow direction and plastic deformation of materials, and are suitable for processing plastic materials (such as iron, aluminum, magnesium and other steel parts).
- Products like plastic and ductile iron must not be processed with forming taps without plasticity.
- Applicable machine tools: automatic lathes, CNC, milling machines, drilling machines, tapping machines, etc.
SKU: 002-23041911 -
Indexable Tools, Turning Inserts, TURNING TOOLS
YNMG-F3P Double-Sided 25° Corner Inserts for Internal and External Deep and Narrow Profiling and Undercutting
Indexable Tools, Turning Inserts, TURNING TOOLSYNMG-F3P Double-Sided 25° Corner Inserts for Internal and External Deep and Narrow Profiling and Undercutting
- Double-Sided 25° Corner Inserts for Internal and External Deep and Narrow Profiling and Undercutting.
SKU: YNMG-F3P Double-Sided 25° Corner Inserts for Internal and External Deep and Narrow Profiling and Undercutting