Shop
Showing 5131–5160 of 7424 results
-
Face milling, Indexable Tools, Milling Tools
SPM-D-CA Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber
Face milling, Indexable Tools, Milling ToolsSPM-D-CA Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber
- Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber.
- Number of inserts.
- Maximum RPM.
SKU: SPM-D-CA Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
F90LN-FR CA11 Adjustable 90° Face Mills (used mainly for PCD/CBN inserts)
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsF90LN-FR CA11 Adjustable 90° Face Mills (used mainly for PCD/CBN inserts)
- Adjustable 90° face mills (used mainly for PCD/CBN inserts).
- The tool bodies are made from aluminum (AFR) and the 50 mm tools are made from steel (SFR).
- Number of inserts.
- Please refer to PCD and CBN specific insert D.O.C. recomendations.
- Maximum RPM.
SKU: F90LN-FR CA11 Adjustable 90° Face Mills (used mainly for PCD/CBN inserts) -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HSM90SFD-HSK A63/80-22 90° Endmills with Integral HSK Adaptation Carrying Super Positive Inserts for Machining Aluminum at High Rotation Speeds
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHSM90SFD-HSK A63/80-22 90° Endmills with Integral HSK Adaptation Carrying Super Positive Inserts for Machining Aluminum at High Rotation Speeds
- 90° Endmills with Integral HSK Adaptation Carrying Super Positive Inserts for Machining Aluminum at High Rotation Speeds.
-
A cooling tube must be used with all internal coolant HSK spindles (should be ordered separately).
-
Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screws.
-
Insert tightening torque: 9 (Nxm).
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: HSM90SFD-HSK A63/80-22 90° Endmills with Integral HSK Adaptation Carrying Super Positive Inserts for Machining Aluminum at High Rotation Speeds -
Angle Head, Clamping Technology
ANGLE HEAD AG90 SERIES BBT50 Face Milling type
- Tool life is improved by high-rigidity bearings and optimum spindle dimensions.
- Series’ highest rotation transmission force of 20kw (at 1,500min-1).
- 90° indexing mechanism is used to allow index of 90° increments after adjustment. (Indexing accuracy ±5′).
SKU: ANGLE HEAD AG90 SERIES BBT50 Face Milling type -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HSM90S FAL-22 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHSM90S FAL-22 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds
- 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds.
-
Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screws.
-
Insert tightening torque: 9 (Nxm).
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: HSM90S FAL-22 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 FAL-22 Face Mills Carrying HM90 APCR 2206… Inserts for Machining Aluminum
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 FAL-22 Face Mills Carrying HM90 APCR 2206… Inserts for Machining Aluminum
- Face Mills Carrying HM90 APCR 2206… Inserts for Machining Aluminum.
- D.O.C. changes according to insert radius.
- ap 20.5 is the value for HM90 APCR220650.
- Insert tightening torque: 6 Nxm.
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: HM90 FAL-22 Face Mills Carrying HM90 APCR 2206... Inserts for Machining Aluminum -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 FAL-15 Face Mills Carrying HM90 AXCR 1505.. Inserts for Machining Aluminum
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 FAL-15 Face Mills Carrying HM90 AXCR 1505.. Inserts for Machining Aluminum
- Face Mills Carrying HM90 AXCR 1505.. Inserts for Machining Aluminum.
- Number of inserts.
- Maximum RPM.
- Maximum ramping angle.
SKU: HM90 FAL-15 Face Mills Carrying HM90 AXCR 1505.. Inserts for Machining Aluminum -
Angle Head, Clamping Technology
ANGLE HEAD AG90 SERIES BBT40/BBT50 Compact type PAT. Clamping diameter: ø2.5 – ø13
Angle Head, Clamping TechnologyANGLE HEAD AG90 SERIES BBT40/BBT50 Compact type PAT. Clamping diameter: ø2.5 – ø13
- Compact and lightweight while fully equipped with the functions and accuracy required in drilling.
SKU: ANGLE HEAD AG90 SERIES BBT40/BBT50 Compact type PAT. Clamping diameter: ø2.5 - ø13 -
Indexable Tools, Milling Tools, Shoulder milling tools
HM90 EAL-HSK63A-15 Long Reach Endmills with Integral HSK Adaptation Carrying HM90 AXCR 1505… Inserts for Machining Aluminum
Indexable Tools, Milling Tools, Shoulder milling toolsHM90 EAL-HSK63A-15 Long Reach Endmills with Integral HSK Adaptation Carrying HM90 AXCR 1505… Inserts for Machining Aluminum
- Long Reach Endmills with Integral HSK Adaptation Carrying HM90 AXCR 1505… Inserts for Machining Aluminum.
-
32 and 40 mm diameter tools feature balancing adjustment screws.
-
A cooling tube must be used with all internal coolant HSK spindles (should be ordered separately).
-
Insert tightening torque: 3.2 Nxm.
- Maximum RPM.
- Maximum ramping angle.
SKU: HM90 EAL-HSK63A-15 Long Reach Endmills with Integral HSK Adaptation Carrying HM90 AXCR 1505... Inserts for Machining Aluminum -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 EAL-15 Long Reach Endmills Carrying HM90 AXCR 1505… Inserts for Machining Aluminum
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 EAL-15 Long Reach Endmills Carrying HM90 AXCR 1505… Inserts for Machining Aluminum
- Long Reach Endmills Carrying HM90 AXCR 1505… Inserts for Machining Aluminum.
- Insert tightening torque: 350 Nxcm.
- Number of inserts.
- C-Cylindrical.
- Maximum RPM.
- Maximum ramping angle.
SKU: HM90 EAL-15 Long Reach Endmills Carrying HM90 AXCR 1505... Inserts for Machining Aluminum -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 FAL-16BR Face Mills Carrying HM90 APCR 1605… Inserts with Corner Radii Equal or Larger Than 5 mm for Machining Aluminum
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 FAL-16BR Face Mills Carrying HM90 APCR 1605… Inserts with Corner Radii Equal or Larger Than 5 mm for Machining Aluminum
- Face Mills Carrying HM90 APCR 1605… Inserts with Corner Radii Equal or Larger Than 5 mm for Machining Aluminum.
-
Note: HM90 APCR 1605..R-P inserts with corner radii smaller than 5 mm should not be used on BR tools.
-
Insert tightening torque: 6 Nxm.
- Number of inserts.
- Maximum RPM.
- Maximum ramping angle.
SKU: HM90 FAL-16BR Face Mills Carrying HM90 APCR 1605... Inserts with Corner Radii Equal or Larger Than 5 mm for Machining Aluminum -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 FAL-16 Face Mills Carrying HM90 APCR 1605… Inserts for Machining Aluminum
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 FAL-16 Face Mills Carrying HM90 APCR 1605… Inserts for Machining Aluminum
- Face Mills Carrying HM90 APCR 1605… Inserts for Machining Aluminum.
- Insert tightening torque: 600 Nxcm .
- HM90 APCR 1605..R-P inserts with corner radii 3.2 and 4.0 mm require pocket modification, corners larger than 4.5 mm should be used only on BR tools.
- Number of inserts.
- D.O.C. changes according to insert radius. ap 15.8 is the value for HM90 APCR 160520R-P.
- Maximum RPM.
- Maximum ramping angle.
SKU: HM90 FAL-16 Face Mills Carrying HM90 APCR 1605... Inserts for Machining Aluminum -
Angle Head, Clamping Technology
ANGLE HEAD AG90 SERIES BBT50 Long type PAT. Clamping diameter: ø0.25 – ø20
Angle Head, Clamping TechnologyANGLE HEAD AG90 SERIES BBT50 Long type PAT. Clamping diameter: ø0.25 – ø20
- Ideal for inner-diameter lateral drilling and keyway grooving of large workpieces.
- 100, 200 or 300mm additional length to standard units are newly available.
SKU: ANGLE HEAD AG90 SERIES BBT50 Long type PAT. Clamping diameter: ø0.25 - ø20 -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 EAL-HSK63A-16 Long Reach Endmills with Integral HSK Adaptation Carrying HM90 APCR 1605… Inserts for Machining Aluminum
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 EAL-HSK63A-16 Long Reach Endmills with Integral HSK Adaptation Carrying HM90 APCR 1605… Inserts for Machining Aluminum
- Long Reach Endmills with Integral HSK Adaptation Carrying HM90 APCR 1605… Inserts for Machining Aluminum.
- Insert tightening torque: 600 Nxcm.
- HM90 APCR 1605..R-P inserts with corner radii 3.2 and 4.0 mm require pocket modification, corners larger than 4.5 mm should be used only on BR tools.
- A cooling tube must be used with all internal coolant HSK spindles (should be ordered separately).
SKU: HM90 EAL-HSK63A-16 Long Reach Endmills with Integral HSK Adaptation Carrying HM90 APCR 1605... Inserts for Machining Aluminum -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 EAL-16 Long Reach Endmills Carrying HM90 APCR 1605 Inserts for Machining Aluminum
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 EAL-16 Long Reach Endmills Carrying HM90 APCR 1605 Inserts for Machining Aluminum
- Long Reach Endmills Carrying HM90 APCR 1605 Inserts for Machining Aluminum.
- Insert tightening torque: 600 Nxcm.
- HM90 APCR 1605..R-P inserts with corner radii 3.2 and 4.0 mm require pocket modification, corners larger than 4.5 mm should be used only on BR tools.
SKU: HM90 EAL-16 Long Reach Endmills Carrying HM90 APCR 1605 Inserts for Machining Aluminum -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HSM90S FAL-14 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHSM90S FAL-14 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds
- 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds.
-
Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screw.
-
Insert tightening torque: 6 (Nxm).
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: HSM90S FAL-14 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds -
Angle Head, Clamping Technology
ANGLE HEAD AG90 SERIES BBT40/BBT50 TWIN HEAD (180° diagonal) PAT. Clamping diameter: ø1.5 – ø10
Angle Head, Clamping TechnologyANGLE HEAD AG90 SERIES BBT40/BBT50 TWIN HEAD (180° diagonal) PAT. Clamping diameter: ø1.5 – ø10
- Twin spindle head with a compact design. Symmetrical machining can be performed using one unit, contributing to the reduction of the number of magazines.
SKU: ANGLE HEAD AG90 SERIES BBT40/BBT50 TWIN HEAD (180° diagonal) PAT. Clamping diameter: ø1.5 - ø10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HSM90S EAL-14 Long Reach Endmills Carrying HSM90S APCR 1405… Inserts for Machining Aluminum
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHSM90S EAL-14 Long Reach Endmills Carrying HSM90S APCR 1405… Inserts for Machining Aluminum
- Long Reach Endmills Carrying HSM90S APCR 1405… Inserts for Machining Aluminum.
-
Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screw.
-
Insert tightening torque: 6 (Nxm).
- Number of inserts.
- Maximum RPM.
- Maximum ramping angle.
SKU: HSM90S EAL-14 Long Reach Endmills Carrying HSM90S APCR 1405... Inserts for Machining Aluminum -
Gear milling, Indexable Tools, Milling Tools
ETS Gear Mill Tools for Milling Gear Profile Carrying Tangentially Clamped Inserts
Gear milling, Indexable Tools, Milling ToolsETS Gear Mill Tools for Milling Gear Profile Carrying Tangentially Clamped Inserts
- Tools for Milling Gear Profile Carrying Tangentially Clamped Inserts.
-
Other cutter diameters with alternative connection options (shank or arbor-type) can be provided on request.
- Number of inserts.
- Master insert identification.
SKU: ETS Gear Mill Tools for Milling Gear Profile Carrying Tangentially Clamped Inserts -
Gear milling, Indexable Tools, Milling Tools
LNET 18-M Indexable Inserts for Involute Gear Profile Milling According to DIN 3972 Basic Profile ||
Gear milling, Indexable Tools, Milling ToolsLNET 18-M Indexable Inserts for Involute Gear Profile Milling According to DIN 3972 Basic Profile ||
- Indexable Inserts for Involute Gear Profile Milling According to DIN 3972 Basic Profile ||.
- Other gear profiles within module 1.0-1.75 mm range can be provided on request.
- Gear teeth range.
SKU: LNET 18-M Indexable Inserts for Involute Gear Profile Milling According to DIN 3972 Basic Profile || -
Gear milling, Indexable Tools, Milling Tools
SD-M-N-SP Interchangeable Solid Carbide Heads for Involute Gear Profile Milling According to DIN 3972 Basic Profile ||
Gear milling, Indexable Tools, Milling ToolsSD-M-N-SP Interchangeable Solid Carbide Heads for Involute Gear Profile Milling According to DIN 3972 Basic Profile ||
- Interchangeable Solid Carbide Heads for Involute Gear Profile Milling According to DIN 3972 Basic Profile ||.
- Tightening torque 4 Nxm.
- Gear teeth range.
- Number of cutting edges.
SKU: SD-M-N-SP Interchangeable Solid Carbide Heads for Involute Gear Profile Milling According to DIN 3972 Basic Profile || -
External grooving, Indexable Tools, Internal grooving, Parting And Grooving Tools, Parting off tools
Single-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel
External grooving, Indexable Tools, Internal grooving, Parting And Grooving Tools, Parting off toolsSingle-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel
- Single-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel.
- Cutting width tolerance (+/-).
SKU: Single-Sided Inserts with Central Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel -
Grooving Inserts, Indexable Tools, Internal grooving, Parting And Grooving Tools, Parting off tools
GIM-C Parting and Grooving Single-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Internal grooving, Parting And Grooving Tools, Parting off toolsGIM-C Parting and Grooving Single-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
- Parting and Grooving Single-Sided Inserts for Parting Bars, Hard Materials and Tough Applications.
- Cutting width tolerance (+/-).
SKU: GIM-C Parting and Grooving Single-Sided Inserts for Parting Bars, Hard Materials and Tough Applications -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
GM-DG Slitting Cutters Carrying Self-Clamped Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsGM-DG Slitting Cutters Carrying Self-Clamped Inserts
- Slitting Cutters Carrying Self-Clamped Inserts.
- DHUB refers to SW/S drive shanks and R drive flange set .
- Maximum RPM may not be exceeded.
- Only one key slot.
- Minimum cutting width.
- Maximum cutting width.
- Number of inserts.
- Maximum RPM.
SKU: GM-DG Slitting Cutters Carrying Self-Clamped Inserts