DC MOTORS
- 10W □60mm
- Motor Performance Parameters
Model | Voltage | Power | No-load Parameters | Load Parameters | Brush Life | Motor Weight | |||
Speed | Current | Speed | Torque | Current | |||||
V | W | r/min | A | r/min | mN.m | A | H | kg | |
Z2D10-12 □ | 12 | 10 | 3200 | 1.0 Max. | 2800 | 34 | 2.0 | 2000 | 0.7 |
Z2DW10-12□ | 12 | 10 | 3200 | 1.0 Max. | 2800 | 34 | 2.0 | 2000 | 0.7 |
Z2D10-24 □ | 24 | 10 | 3300 | 0.5 Max. | 3000 | 32 | 0.9 | 2000 | 0.7 |
Z2DW10-24□ | 24 | 10 | 3300 | 0.5 Max. | 3000 | 32 | 0.9 | 2000 | 0.7 |
Z2D10-90 □ | 90 | 10 | 3200 | 0.3 Max. | 2800 | 34 | 0.6 | 2000 | 0.7 |
Z2DW10-90□ | 90 | 10 | 3200 | 0.3 Max. | 2800 | 34 | 0.6 | 2000 | 0.7 |
- Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
- We use W after D in the model to express the external brush motor, such as Z2DW06-12GN. If no W, it means the standard internal brush motor. For external brush motor, you can replce the brush directly. For intermal ones, we need to disassembly the motor first.
- Type Motor
Type | Model | |
Pinion Shaft | Round Shaft | |
Lead Wire Type | Z2D10-12GN | Z2D10-12A |
Z2DW10-12GN | Z2DW10-12A | |
Z2D10-24GN | Z2D10-24A | |
Z2DW10-24GN | Z2D10-24A | |
Z2D10-90GN | Z2D10-90A | |
Z2DW10-90GN | Z2DW10-90A |
- Characteristic Curve Of Motor
- Parallel Shaft Gearhead (Sold Separately)
Gearhead Type | Gearhead Model | Gear Ratio |
Long Life • Low Noise | 2GN□K | 3、3.6、5、6、7.5、9、 12.5、15、18、25、30、 36、50、60、75、90、 100、120 、150、180、200 |
2GN10XK (Decimal Gearhead) |
Enter the gear ratio in the box | ■= wilhin the model name
- Wiring Diagram Of Motor
Standard length of lead wire:300mm±10, model: UI1015 type: AWG20; lead wire length, model will be customerised by dient requestmant under allowed circumstamce of adoptable dimension.
Gear Motor-Torque Table
- Gearheads are sold separately. Decimal gearheads are not available.
- Enter the gear ratio in the box(■) within the model name.
- The colored background [▭]indicates the same rotating direction of the motor while the rotating direction of others are opposite.
- The speed is calculated by dividing the motor’s synchronous speed by the gear ratio. The actual speed is 2%-20% less than the displayed value, depending on the size of the load.
- To reduce the speed beyond the gear ratio in the table, attach a decimal gearhead(gear ratio: 10)between the gearhead and motor. In that case, the permissible torque is 3N.m.
- Allowance Torque Unit :Upside ( N.m ) / Belowside ( kgf.cm )
Type | Gear Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 40 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
Z2D10-24GN | Speed r/min | 1000 | 833 | 600 | 500 | 400 | 333 | 300 | 240 | 200 | 167 | 150 | 120 | 100 | 83 | 75 | 60 | 50 | 40 | 33 | 30 | 25 | 20 | 17 | 15 |
2GN□K | 0.08 | 0.09 | 0.13 | 0.15 | 0.19 | 0.23 | 0.26 | 0.32 | 0.39 | 0.46 | 0.46 | 0.58 | 0.70 | 0.84 | 0.93 | 1.16 | 1.25 | 1.75 | 1.88 | 2.09 | 2.51 | 3.00 | 3.00 | 3.00 | |
0.76 | 0.91 | 1.26 | 1.52 | 1.90 | 2.27 | 2.53 | 3.16 | 3.79 | 4.55 | 4.55 | 5.69 | 6.82 | 8.19 | 9.10 | 11.4 | 12.3 | 15.4 | 18.4 | 20.5 | 24.6 | 30.0 | 30.0 | 30.0 |
- To Allow The Hoisting Of The Load Allow Axial Load Motor(Round Shaft) -P272 Gearhead —P272
- J Permissible Load Inertia J For Gearhead 一P272
- Dimensions(Unit mm) Mounting screws are included with gearhead.
- Lead Wiring Type Weight: Motor: 0.7kg Gearhead : 0.4kg
Motor Model | Gearhead Model | Gear Ratio | LI |
Z2D10-12GN Z2DW10-12GN Z2D10-24GN Z2DW10-24GN Z2D10-90GN Z2DW10-90GN |
2GN□K | 3~18 | 32 |
25~200 | 41 |
Enter the gear ratio in the box ( □ ) within the model name
- Shaft Section Of Round Shaft Type
Excluding weight and the shaft section motor shape are the same as t hose of the pinion shaft type.
- Decimal Gearhead
Can be connected to GN pinion shaft type 2GN10X
Weight: 0.24kg
There are no reviews yet.