Turning Inserts
Showing 541–570 of 1166 results
-
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VCGX(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VCGX(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VCMX
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VCMX -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VCMX(inch)
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VCMX(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VNEG
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VNEG -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VNEG(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VNEG(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VNGA
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VNGA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VNGA(inch)
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for VNGA(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VNMG
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VNMG -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VNMG(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VNMG(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for VPGT
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for VPGT -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for WCMX
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for WCMX -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for WNEG
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for WNEG -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for WNGA
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for WNGA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for WNGA(inch)
- PCBN mainly processes high-hardness ferrous metals, such as hardened steel and cast steel (iron), powder metallurgy.
- It can withstand high temperature (above 1000 degrees) and the hardness is always 8000HV. It is a good tool material for improving production efficiency and processing difficult-to-machine materials.
- The material is not suitable for processing steel below 45HRC, which is prone to adhesive wear and cracking.
- PCD is mainly processing non-ferrous metals and non-metals, such as aluminum parts and copper parts.
- It can sharpen a very sharp edge, get a better processing surface, generally can reach 0.2 finish, and is also the first choice material for processing new non-metallic materials.
- It has high wear resistance, low friction, and hardness can reach 10000HV or more, and can cut hard alloys and industrial ceramics and other high hardness products.
SKU: General turning inserts for WNGA(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for WNMA
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for WNMA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for WNMA(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for WNMA(inch) -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for WNMG
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for WNMG -
Indexable Tools, Turning Inserts, TURNING TOOLS
General turning inserts for WNMG(inch)
- The cermet alloy with uniform and fine grain structure and the uniform structure and ring phase structure can be controlled, which improves the strength and hardness of the cermet.
- Strengthen the composition design of the bonding phase and the grain boundary, improve the high temperature performance, thermal conductivity and thermal shock resistance of the cermet.
- The physical vapor deposition (PVD) coating is applied on the metal ceramic substrate with high toughness; it has high hardness and toughness, and has a wide range of applications.
SKU: General turning inserts for WNMG(inch) -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CCET Rhombic80°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) CCET Rhombic80°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CCMT/CCGT Rhombic80°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) CCMT/CCGT Rhombic80°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
SKU: Turning Inserts (Positive) CCMT/CCGT Rhombic80°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CCMT/CCGX Rhombic80°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) CCMT/CCGX Rhombic80°,with Hole
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
- AL for grooved aluminum alloy cutting.
- Large rake angle, high sharpness of blade.
SKU: Turning Inserts (Positive) CCMT/CCGX Rhombic80°,with Hole 3 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CPMT/CCGT Rhombic80°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) CPMT/CCGT Rhombic80°,with Hole
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- Strong tool nose due to flat cutting edge and sharp cutting edge due to double rake angle.
SKU: Turning Inserts (Positive) CCMT/CCGX Rhombic80°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) DCET Rhombic55°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) DCET Rhombic55°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) DCMT/DCGT/DCGX Rhombic55°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) DCMT/DCGT/DCGX Rhombic55°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
- AL for grooved aluminum alloy cutting.
- Large rake angle, high sharpness of blade.
SKU: Turning Inserts (Positive) DCET Rhombic55°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) SCMT/SCGX Square 90°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) SCMT/SCGX Square 90°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
- AL for grooved aluminum alloy cutting.
- Large rake angle, high sharpness of blade.
SKU: Turning Inserts (Positive) SCMT/SCGX Square 90°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) SPMT Square 90°,with Hole
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
SKU: Turning Inserts (Positive) SPMT Square 90°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TCET Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TCET Triangle 60°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) TCET Triangle 60°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TCMT/TCGT Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TCMT/TCGT Triangle 60°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
SKU: Turning Inserts (Positive) TCMT/TCGT Triangle 60°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TPET/TPEH Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TPET/TPEH Triangle 60°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) TPET/TPEH Triangle 60°,with Hole 1