Grooving Inserts
Showing 241–270 of 298 results
-
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
PICCO-015 (face grooving) Inserts for Deep Face Grooving
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsPICCO-015 (face grooving) Inserts for Deep Face Grooving
- Inserts for Deep Face Grooving.
- Only right-hand inserts are available as standard, left-hand inserts on request.
- All inserts are with sharp corners.
SKU: PICCO-015 (face grooving) Inserts for Deep Face Grooving -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
PICCO-016/020 (face grooving) Inserts with Coolant Holes for Deep Face Grooving
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsPICCO-016/020 (face grooving) Inserts with Coolant Holes for Deep Face Grooving
- Inserts with Coolant Holes for Deep Face Grooving.
- All inserts have two coolant holes which may be used with coolant pressure up to 100 bars.
SKU: PICCO-016/020 (face grooving) Inserts with Coolant Holes for Deep Face Grooving -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
PICCO-620 (groove along shaft) Inserts for Grooving Along a Shaft DAXN 6 mm
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsPICCO-620 (groove along shaft) Inserts for Grooving Along a Shaft DAXN 6 mm
- Inserts for Grooving Along a Shaft Dmin 6 mm.
- Only right-hand inserts are available as standard, left-hand inserts on request.
- All carbide inserts are with sharp corners.
SKU: PICCO-620 (groove along shaft) Inserts for Grooving Along a Shaft DAXN 6 mm -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-A Single-Ended Inserts for Parting, Grooving and Slitting Aluminum
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-A Single-Ended Inserts for Parting, Grooving and Slitting Aluminum
- Single-Ended Inserts for Parting, Grooving and Slitting Aluminum.
- Cutting width tolerance (+/-).
- Corner radius tolerance (+/-).
SKU: TAG N-A Single-Ended Inserts for Parting, Grooving and Slitting Aluminum -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications
- Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
- Larger corner radii for interrupted cut and high feed applications.
- Similar to C-type, but with a modified edge; improved chip control at medium feeds.
- Cutting width tolerance (+/-).
SKU: TAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications
- Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: TAG N-C/W/M Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-HF Single-Ended Inserts for High Feed Parting & Grooving, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-HF Single-Ended Inserts for High Feed Parting & Grooving, Hard Materials and Tough Applications
- Single-Ended Inserts for High Feed Parting and Grooving, Hard Materials and Tough Applications.
SKU: TAG N-HF Single-Ended Inserts for High Feed Parting & Grooving, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-J/JS/JT Single-Ended Inserts for Parting, Grooving and Slitting Soft Materials
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-J/JS/JT Single-Ended Inserts for Parting, Grooving and Slitting Soft Materials
- Single-Ended Inserts for Parting, Grooving and Slitting Soft Materials.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low-to-medium feeds.
- Cutting width tolerance (+/-).
- Corner radius tolerance (+/-).
SKU: TAG N-J/JS/JT Single-Ended Inserts for Parting, Grooving and Slitting Soft Materials -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-LF Single-Ended Inserts for Parting, Grooving and Slitting Stainless Steel
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-LF Single-Ended Inserts for Parting, Grooving and Slitting Stainless Steel
- Single-Ended Inserts for Parting, Grooving and Slitting Stainless Steel.
SKU: TAG N-LF Single-Ended Inserts for Parting, Grooving and Slitting Stainless Steel -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-MF Single-Ended Inserts for Parting, Grooving and Slitting Stainless and Alloy Steel at Medium Feed
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-MF Single-Ended Inserts for Parting, Grooving and Slitting Stainless and Alloy Steel at Medium Feed
- Single-Ended Inserts for Parting Grooving and Slitting Stainless and Alloy Steel at Medium Feed.
SKU: TAG N-MF Single-Ended Inserts for Parting, Grooving and Slitting Stainless and Alloy Steel at Medium Feed -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG N-UT Single-Sided Inserts for Parting, Grooving & Slitting at Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG N-UT Single-Sided Inserts for Parting, Grooving & Slitting at Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel
- Single-Sided Inserts for Parting, Grooving & Slitting at Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel.
SKU: TAG N-UT Single-Sided Inserts for Parting, Grooving & Slitting at Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG R/L-C Single-Ended Inserts for Parting Bars, Hard Materials and Tough Parting Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG R/L-C Single-Ended Inserts for Parting Bars, Hard Materials and Tough Parting Applications
- Single-Ended Inserts for Parting Bars, Hard Materials and Tough Parting Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: TAG R/L-C Single-Ended Inserts for Parting Bars, Hard Materials and Tough Parting Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAG R/L-J/JS TANG-GRIP Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAG R/L-J/JS TANG-GRIP Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
- TANG-GRIP Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts.
SKU: TAG R/L-J/JS TANG-GRIP Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TAGB/TAGBA Single-Ended Utility Inserts for Grooving, Turning and Parting
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTAGB/TAGBA Single-Ended Utility Inserts for Grooving, Turning and Parting
- Single-Ended Utility Inserts for Grooving, Turning and Parting.
- H-type chipformer with a negative T-land for machining heavy interrupted applications and cast iron parts.
SKU: TAGB/TAGBA Single-Ended Utility Inserts for Grooving, Turning and Parting -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TDC2 TDC3 TDC4 2.0mm 3mm 4mm Carbide Inserts Grooving Blade Parting off CNC Lathe Slot Cutter Tool for Metal
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTDC2 TDC3 TDC4 2.0mm 3mm 4mm Carbide Inserts Grooving Blade Parting off CNC Lathe Slot Cutter Tool for Metal
- LF6018: Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel, and also suitable for cutting heat-resistant alloy steel at low speeds.
SKU: 1005001265389964 -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TDC2 TDC3 TDC4 TDT2 TDT3 TDT4 CNC Lathe Cutter Grooving Carbide Inserts Cutting Blades For Stainless Steel
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTDC2 TDC3 TDC4 TDT2 TDT3 TDT4 CNC Lathe Cutter Grooving Carbide Inserts Cutting Blades For Stainless Steel
- LF6018: Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel, and also suitable for cutting heat-resistant alloy steel at low speeds.
SKU: 1005002917550395 -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
TDT2 TDT3 TDT4 Carbide Inserts Grooving Blade Parting off CNC Lathe Slot Cutter Tool for Stainless Steel
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsTDT2 TDT3 TDT4 Carbide Inserts Grooving Blade Parting off CNC Lathe Slot Cutter Tool for Stainless Steel
- LF6018: Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel, and also suitable for cutting heat-resistant alloy steel at low speeds.
SKU: 1005001265420995