External grooving
Showing 61–90 of 161 results
-
External grooving, Face grooving, Indexable Tools, Parting And Grooving Tools
GHMPR/L Perpendicular Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
External grooving, Face grooving, Indexable Tools, Parting And Grooving ToolsGHMPR/L Perpendicular Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
- Perpendicular Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts.
- To control the clamping torque, use interchangeable key blades and adjustable torque handles (optional).
- Use for recessing: light turning, small depth of cut (ap=0.1-0.5 mm) and small feed (f=0.1 mm/rev).
SKU: GHMPR/L Perpendicular Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts -
External grooving, Face grooving, Indexable Tools, Parting And Grooving Tools
GHMR/L Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
External grooving, Face grooving, Indexable Tools, Parting And Grooving ToolsGHMR/L Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
- Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts.
- To control the clamping torque, use interchangeable key blades and adjustable torque handles (optional).
- Use for recessing: light turning, small depth of cut (ap=0.1-0.5 mm) and small feed (f=0.1 mm/rev).
SKU: GHMR/L Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts -
External grooving, Indexable Tools, Parting And Grooving Tools
GHMUR/L External Holders for 45° Undercutting
External grooving, Indexable Tools, Parting And Grooving ToolsGHMUR/L External Holders for 45° Undercutting
- External Holders for 45° Undercutting.
- For D>100 mm, GIP/GIF inserts can be used (clearance types UN, D or G are not required).
- To control the clamping torque, use interchangeable key blades and adjustable torque handles (optional).
SKU: GHMUR/L External Holders for 45° Undercutting -
External grooving, Indexable Tools, Parting And Grooving Tools
GHSR/L External Machining Holders for Swiss-Type and Automatic Machines
External grooving, Indexable Tools, Parting And Grooving ToolsGHSR/L External Machining Holders for Swiss-Type and Automatic Machines
- External grooving and turning holders for Swiss-type and automatic machines.
- To control the clamping torque, use interchangeable key blades and adjustable torque handles (optional).
SKU: GHSR/L External Machining Holders for Swiss-Type and Automatic Machines -
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off tools
GHSR/L-JHP-SL Grooving and Turning Side Lock Tools with Channels for High Pressure Coolant on Swiss-Type and Automatic Machines
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off toolsGHSR/L-JHP-SL Grooving and Turning Side Lock Tools with Channels for High Pressure Coolant on Swiss-Type and Automatic Machines
- Grooving and Turning Side Lock Tools with Channels for High Pressure Coolant on Swiss-Type and Automatic Machines.
SKU: GHSR/L-JHP-SL Grooving and Turning Side Lock Tools with Channels for High Pressure Coolant on Swiss-Type and Automatic Machines -
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off tools
Grooving and Turning SUMO-GRIP Tools with Channels for High Pressure Coolant
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off toolsGrooving and Turning SUMO-GRIP Tools with Channels for High Pressure Coolant
- Grooving and Turning SUMO-GRIP Tools with Channels for High Pressure Coolant.
SKU: Grooving and Turning SUMO-GRIP Tools with Channels for High Pressure Coolant -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tool SABS-40F Type
- The cutting effect is the best when the tool tip is kept slightly below the center line.
- The cutting speed changes constantly in the process of cutting, especially when cutting, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tool SABS-40F Type -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tool SABW-40F Type
- The cutting effect is the best when the tool tip is kept slightly below the center line.
- The cutting speed changes constantly in the process of cutting, especially when cutting, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tool SABW-40F Type -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tool SABW-50F Type
- The cutting effect is the best when the tool tip is kept slightly below the center line.
- The cutting speed changes constantly in the process of cutting, especially when cutting, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tool SABW-50F Type -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools CGBR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools CGBR/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools DBH
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools DBH -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools GGB R/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools GGB R/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools KTGFR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools KTGFR/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools MGEHR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools MGEHR/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools SGB R/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools SGB R/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools SGTR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools SGTR/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools SPB
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools SPB -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools ZQ R/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools ZQ R/L -
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off tools
HGFH Parting and Grooving Blades for 3 mm GRIP Inserts
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off toolsHGFH Parting and Grooving Blades for 3 mm GRIP Inserts
- Parting and Grooving Blades for 3 mm GRIP Inserts.
- Maximum overhang.
- Extractor should be ordered separately.
SKU: HGFH Parting and Grooving Blades for 3 mm GRIP Inserts -
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off tools
HGPAD-JHP Adapters with High Pressure Coolant Channels Carrying HELI-GRIP Inserts
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off toolsHGPAD-JHP Adapters with High Pressure Coolant Channels Carrying HELI-GRIP Inserts
- Adapters with High Pressure Coolant Channels Carrying HELI-GRIP Inserts.
- Minimum cutting width.
- Maximum cutting width.
SKU: HGPAD-JHP Adapters with High Pressure Coolant Channels Carrying HELI-GRIP Inserts -
External grooving, Indexable Tools, Parting And Grooving Tools
MGEHR/L 2525 1.5/2/2.5/3/4/5/6mm Grooving Tool Arbor CNC Lathe Cutting Tools MGMN Turning Blades
External grooving, Indexable Tools, Parting And Grooving ToolsMGEHR/L 2525 1.5/2/2.5/3/4/5/6mm Grooving Tool Arbor CNC Lathe Cutting Tools MGMN Turning Blades
- Screw compression, high blade compression force
- High-quality matrix, shock and wear resistance
- Laser laser processing is convenient to identify the model of the arbor
- Individually packaged, equipped with PE box with logo
SKU: 1005001585453721 -
External grooving, Indexable Tools, Parting And Grooving Tools
MGEHR/L1616-1.5/2/2.5/3mm CNC Tool Arbor Grooving Tool Holder MGMN TurningGroove Blade Lathe Cutting Tools
External grooving, Indexable Tools, Parting And Grooving ToolsMGEHR/L1616-1.5/2/2.5/3mm CNC Tool Arbor Grooving Tool Holder MGMN TurningGroove Blade Lathe Cutting Tools
- Screw compression, high blade compression force
- High-quality matrix, shock and wear resistance
- Laser laser processing is convenient to identify the model of the arbor
- Individually packaged, equipped with PE box with logo
SKU: 1005001584949885 -
External grooving, Indexable Tools, Parting And Grooving Tools
MGEHR/L2020 1.5/2/2.5/3/4/5/6mm Grooving Turning ToolHolder Lathe Cutter Arbor CNC MGMN Bar
External grooving, Indexable Tools, Parting And Grooving ToolsMGEHR/L2020 1.5/2/2.5/3/4/5/6mm Grooving Turning ToolHolder Lathe Cutter Arbor CNC MGMN Bar
- Screw compression, high blade compression force
- High-quality matrix, shock and wear resistance
- Laser laser processing is convenient to identify the model of the arbor
- Individually packaged, equipped with PE box with logo
SKU: 1005001584743895