Shoulder milling tools
Showing 121–150 of 380 results
-
Indexable Tools, Milling Tools, Shoulder milling tools
CA90 1928-R/L-PM15 Adjustable Cartridge for SDN and FDN-CAPM15 Slotting Cutters
Indexable Tools, Milling Tools, Shoulder milling toolsCA90 1928-R/L-PM15 Adjustable Cartridge for SDN and FDN-CAPM15 Slotting Cutters
- Adjustable Cartridge for SDN and FDN-CAPM15 Slotting Cutters.
- For inserts with 0.8-1.6 mm radii.
- For inserts with 2.5-3.2 mm radii.
- For inserts with 4.0 mm radius.
SKU: CA90 1928-R/L-PM15 Adjustable Cartridge for SDN and FDN-CAPM15 Slotting Cutters -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
Combination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads MM EFS
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsCombination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads MM EFS
- FINISHRED, combination of roughing and finishing interchangeable solid carbide endmill heads.
- Part of the MULTI-MASTER system.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
SKU: Combination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads MM EFS -
Indexable Tools, Milling Tools, Shoulder milling tools
Corn Milling Cutter High Efficiency Opening Rough Side Milling Cutter Disc Helical Milling Cutter
Indexable Tools, Milling Tools, Shoulder milling toolsCorn Milling Cutter High Efficiency Opening Rough Side Milling Cutter Disc Helical Milling Cutter
- Corn milling cuttercan be replaced blade, cost-effective, more efficient.
- Corn milling cutter is widely used in rough machining, plane machining, rightangle clear step surface and so on.
- Corn milling arbor surface nickel-plated treatment, arbor more rust-resistant,integral nickel-plated treatment, enhanced arbor rust.
SKU: 001-23041801 -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90CN Miliing Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90CN Miliing Tools
- 90° endmills carrying CNMT/HT .. inserts.
- Used mainly for milling square shoulders providing excellent finish of the shoulder side surface.
- They can ramp into the material to machine cavities.
SKU: E90CN Miliing Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90CN-M Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90CN-M Milling Tools
- 90° endmills with a FLEXFIT threaded adaptation carrying CNMT/HT .. inserts.
- Used mainly for milling square shoulders providing excellent finish of the shoulder side surface.
- In addition, they can ramp into the material to machine cavities.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: E90CN-M Milling Tools -
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90SO-04 Milling Tools
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90SO-04 Milling Tools
- Endmills carrying 2 insert geometries, square inserts for 90° shouldering, square inserts for fast feed milling applications.
- Tightening torque 0.5 Nxm.
- C-Cylindrical.
- Number of inserts.
- Maximum ramping angle – valid only with SOMT 040208 PNR-FF insert.
SKU: E90SO-04 Milling Tools -
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90SO-MM-04 Milling Tools
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90SO-MM-04 Milling Tools
- Endmills with a MULTI-MASTER threaded connection carrying 2 insert geometries.
- Square inserts for 90° shouldering, square inserts for fast feed milling applications.
- Tightening torque 0.5 Nxm.
SKU: E90SO-MM-04 Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90XC Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90XC Milling Tools
- Drilling endmills carrying S/XOMT inserts.
- Use the XOMT 06…. insert in central face location.
- Number of inserts.
- Number of flutes.
- C-Cylindrical.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: E90XC Milling Tools -
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools
E93CN Toroidal Bull Nose Endmills with CNHT…and ENHT… Inserts
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling toolsE93CN Toroidal Bull Nose Endmills with CNHT…and ENHT… Inserts
- Toroidal, endmills carrying CNHT…and ENHT…inserts (TORMILL).
- Used for undercutting, for the finish cut of sculptured surfaces, for steep or vertical walls, thin walls, long and unsupported workpieces and parts with non-rigid clamping.
- The specified diameter is for inserts with a 1.0 mm radius. For other radii options, see diameter change in the table below.
- Number of inserts.
- Maximum ramping angle.
- C-Cylindrical.
- Master insert identification.
SKU: E93CN Toroidal Bull Nose Endmills with CNHT...and ENHT... Inserts -
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools
E93CN-M Bull Nose Endmills with FLEXFIT Threaded Adaptation Carrying Toroidal Inserts
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling toolsE93CN-M Bull Nose Endmills with FLEXFIT Threaded Adaptation Carrying Toroidal Inserts
- Endmills with FLEXFIT threaded adaptation carrying toroidal inserts (TORMILL).
- Used for undercutting, for the finish cut of steep or vertical walls, thin walls, long and unsupported workpieces and parts with non-rigid clamping.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter .
SKU: E93CN-M Bull Nose Endmills with FLEXFIT Threaded Adaptation Carrying Toroidal Inserts -
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools
E93CN-MM Bull Nose Endmills with MULTIMASTER Threaded Adaptation Carrying Toroidal Inserts
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling toolsE93CN-MM Bull Nose Endmills with MULTIMASTER Threaded Adaptation Carrying Toroidal Inserts
- Bull Nose Endmills with MULTI-MASTER Threaded Adaptation Carrying Toroidal Inserts.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- The specified diameter is for inserts with a 1.0 mm radius.
- Number of inserts.
- Maximum ramping angle.
- Clamping wrench size.
- Master insert identification.
SKU: E93CN-MM Bull Nose Endmills with MULTIMASTER Threaded Adaptation Carrying Toroidal Inserts -
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools
ER-M Endmills with FLEXFIT Threaded Adaptation Carrying Round Inserts for Profiling and Milling of Round Corners
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling toolsER-M Endmills with FLEXFIT Threaded Adaptation Carrying Round Inserts for Profiling and Milling of Round Corners
- Endmills with FLEXFIT Threaded Adaptation Carrying Round Inserts for Profiling and Milling of Round Corners
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Apply appropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
SKU: ER-M Endmills with FLEXFIT Threaded Adaptation Carrying Round Inserts for Profiling and Milling of Round Corners -
Copy milling, contouring, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
ERW Rough Profiling Endmills with Serrated or Regular Round Inserts
Copy milling, contouring, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsERW Rough Profiling Endmills with Serrated or Regular Round Inserts
- Rough Profiling Endmills with Serrated or Regular Round Inserts.
- Cutting diameter maximum.
- Number of inserts.
- C-Cylindrical.
- Maximum ramping angle.
SKU: ERW Rough Profiling Endmills with Serrated or Regular Round Inserts -
Copy milling, contouring, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
ERW-M Rough Profiling Tools with a FLEXFIT Adaptation
Copy milling, contouring, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsERW-M Rough Profiling Tools with a FLEXFIT Adaptation
- Rough Profiling Tools with a FLEXFIT Adaptation.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: ERW-M Rough Profiling Tools with a FLEXFIT Adaptation -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
F90AD-SFR Adjustable Face Mills (used mainly for PCD/CBN inserts)
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsF90AD-SFR Adjustable Face Mills (used mainly for PCD/CBN inserts)
- Adjustable face mills (used mainly for PCD/CBN inserts).
- The adjustable tools provide excellent surface finish and prolong insert life.
- These tools may also be used for regular HELI2000 AD.. 1505… inserts, for applications that require precise frontal edge adjustment .
- Thinner insert ADM. 1503.. mounted on TSP-15R seat.
- Number of inserts.
- Maximum RPM.
SKU: F90AD-SFR Adjustable Face Mills (used mainly for PCD/CBN inserts) -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
F90LN-FR CA11 Adjustable 90° Face Mills (used mainly for PCD/CBN inserts)
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsF90LN-FR CA11 Adjustable 90° Face Mills (used mainly for PCD/CBN inserts)
- Adjustable 90° face mills (used mainly for PCD/CBN inserts).
- The tool bodies are made from aluminum (AFR) and the 50 mm tools are made from steel (SFR).
- Number of inserts.
- Please refer to PCD and CBN specific insert D.O.C. recomendations.
- Maximum RPM.
SKU: F90LN-FR CA11 Adjustable 90° Face Mills (used mainly for PCD/CBN inserts) -