Shoulder milling tools
Showing 331–360 of 380 results
-
Indexable Tools, Milling Tools, Shoulder milling tools
T290 SM Extended Flute Shell Mills with T290 LNMT 1506… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT290 SM Extended Flute Shell Mills with T290 LNMT 1506… Tangentially Clamped Inserts
- SUMOMILL, shell mills with tangentially clamped, T290 LNMT 1506… inserts with 2 helical cutting edges.
- Number of inserts.
- Number of flutes.
SKU: T290 SM Extended Flute Shell Mills with T290 LNMT 1506... Tangentially Clamped Inserts -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-08 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-08 Milling Tools
- T490 Line, 90° endmills carrying T490 LNMT/LNHT 08…tangentially clamped inserts with 4 helical, 8 mm long cutting edges.
- “B” suffix with long cylindrical shank which may be shortened.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- 0 – Without coolant supply, 1 – With coolant supply
- Maximum ramping angle – valid only with T490 LNHT 080404PNR-RD inserts.
SKU: T490 ELN-08 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-11 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-11 Milling Tools
- 90° endmills carrying T490 LN#T 11… tangentially clamped inserts.
- Important: Maximum clamping torque 3.2 N*m.
- Recommended key handle for limiting torque to 3.2 N*m for this item is HSD 4-3.2NM (to be used with BLD 4 T15-4.8 blade)
SKU: T490 ELN-11 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-13 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-13 Milling Tools
-
90° endmills carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 12.5 mm long cutting edges.
- Cutting recommendations: at ap=5, fz=0.15 at ap=10, fz=0.1.
- “B” suffix for long cylindrical shank which may be shortened.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- Maximum ramping angle – valid only when T490 LNHT 1306 PNTR-RD insert is used.
SKU: T490 ELN-13 Milling Tools -
-
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-16 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-16 Milling Tools
- 90° endmills carrying T490 LNMT 16… tangentially clamped inserts with 4 helical, 16 mm long cutting edges (HELITANG T490Line).
- Number of inserts.
- C-Cylindrical, W-Weldon.
SKU: T490 ELN-16 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-C#-13 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-C#-13 Milling Tools
- 90° endmills with CAMFIX shanks carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 12.5 mm long cutting edges (HELITANG T490 Line).
- Number of inserts.
- Maximum ramping angle – valid only when T490 LNHT 1306 PNTR-RD insert is used.
SKU: T490 ELN-C#-13 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-M Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-M Milling Tools
- HELITANG, 90° endmills with a FLEXFIT threaded adaptation carrying tangentially clamped inserts with 4 helical cutting edges.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: T490 ELN-M Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-MM-08 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-MM-08 Milling Tools
- HELITANG, 90° endmills with a MULTI-MASTER threaded adaptation carrying T490 LNMT/LNHT 08… tangentially clamped inserts with 4 helical, 8 mm long cutting edges.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- Number of inserts.
- Clamping wrench size.
- Maximum ramping angle – valid only with T490 LNHT 080404PNR-RD inserts.
SKU: T490 ELN-MM-08 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 FLN-22ST 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 21 mm Long Cutting Edges
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 FLN-22ST 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 21 mm Long Cutting Edges
- HELITANG T490 Line, 90° face mills carrying T490 LNMT 2212 tangentially clamped inserts with 4 helical 21 mm long cutting edges.
- Number of inserts.
SKU: T490 FLN-22ST 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 21 mm Long Cutting Edges -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNK-11 Extended Flute Endmills Carrying T490 LN#T 11… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNK-11 Extended Flute Endmills Carrying T490 LN#T 11… Tangentially Clamped Inserts
- Extended flute endmills carrying T490 LN#T 11… tangentially clamped inserts.
- Number of flutes.
- Number of inserts.
- C-Cylindrical, W-Weldon.
SKU: T490 LNK-11 Extended Flute Endmills Carrying T490 LN#T 11... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNK-13 Extended Flute Endmills Carrying T490 LNMT/HT 13… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNK-13 Extended Flute Endmills Carrying T490 LNMT/HT 13… Tangentially Clamped Inserts
- Extended flute endmills carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 13 mm long cutting edges (HELITANG T490 Line).
- ae max for regular inserts, up to 0.25xD, ae max for -CS (chip splitting) inserts, up to 0.35xD.
- Number of flutes.
- Number of inserts.
- C-Cylindrical, W-Weldon.
SKU: T490 LNK-13 Extended Flute Endmills Carrying T490 LNMT/HT 13... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNK-13-BT Extended Flute Endmills with BT MAS-403 Tapered Shanks Carrying T490 LNMT/HT 13… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNK-13-BT Extended Flute Endmills with BT MAS-403 Tapered Shanks Carrying T490 LNMT/HT 13… Tangentially Clamped Inserts
- Extended flute endmills with BT MAS-403 tapered shanks carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 13 mm long cutting edges (HELITANG T490 Line).
-
ae max for regular inserts, up to 0.20xD, ae max for -CS (chip splitting) inserts, up to 0.25xD.
- Number of flutes.
- Number of inserts.
SKU: T490 LNK-13-BT Extended Flute Endmills with BT MAS-403 Tapered Shanks Carrying T490 LNMT/HT 13... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNK-13-C# Extended Flute Endmills with CAMFIX Shanks Carrying T490 LNMT/HT 13… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNK-13-C# Extended Flute Endmills with CAMFIX Shanks Carrying T490 LNMT/HT 13… Tangentially Clamped Inserts
- Extended flute endmills with CAMFIX shanks carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 13 mm long cutting edges (HELITANG T490 Line).
- Number of flutes.
- Number of inserts.
SKU: T490 LNK-13-C# Extended Flute Endmills with CAMFIX Shanks Carrying T490 LNMT/HT 13... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNK-13-CF Extended Flute Endmills with CLICKFIT Shanks Carrying T490 LNMT/HT 1306… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNK-13-CF Extended Flute Endmills with CLICKFIT Shanks Carrying T490 LNMT/HT 1306… Tangentially Clamped Inserts
- Extended flute endmills with CLICKFIT shanks carrying T490 LNMT/HT 1306… tangentially clamped inserts.
- ae max for regular inserts, up to 0.25xD. ae max for -CS (chip splitting) inserts, up to 0.35xD.
- Number of flutes.
- Number of inserts.
SKU: T490 LNK-13-CF Extended Flute Endmills with CLICKFIT Shanks Carrying T490 LNMT/HT 1306... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNK-13-INT Extended Flute Endmills with DIN69871 Tapered Shanks Carrying T490 LNMT/HT 13… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNK-13-INT Extended Flute Endmills with DIN69871 Tapered Shanks Carrying T490 LNMT/HT 13… Tangentially Clamped Inserts
- Extended flute endmills with DIN69871 tapered shanks carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical 13 mm long cutting edges (HELITANG T490 Line).
-
ae max for regular inserts, up to 0.20xD, ae max for -CS (chip splitting) inserts, up to 0.25xD.
- Number of flutes.
- Number of inserts.
SKU: T490 LNK-13-INT Extended Flute Endmills with DIN69871 Tapered Shanks Carrying T490 LNMT/HT 13... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNK-BT-FT Basic Units of Modular Extended Flute Endmills with BT MAS- 403 Tapered Shanks Carrying T490 LNMT/HT 1306 Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNK-BT-FT Basic Units of Modular Extended Flute Endmills with BT MAS- 403 Tapered Shanks Carrying T490 LNMT/HT 1306 Inserts
- Basic Units of Modular Extended Flute Endmills with BT MAS- 403 Tapered Shanks Carrying T490 LNMT/HT 1306 Inserts.
- ae max for regular inserts, up to 0.10xD, ae max for -CS (chip splitting) inserts, up to 0.20xD.
- Remove coolant plug screws (SR M6X..DIN916) prior to attaching extension units.
- Number of flutes.
- Number of inserts.
SKU: T490 LNK-BT-FT Basic Units of Modular Extended Flute Endmills with BT MAS- 403 Tapered Shanks Carrying T490 LNMT/HT 1306 Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNK-INT50-FT Basic Units of Modular Extended Flute Endmills with DIN69871 Tapered Shanks Carrying T490 LNMT/HT 1306 Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNK-INT50-FT Basic Units of Modular Extended Flute Endmills with DIN69871 Tapered Shanks Carrying T490 LNMT/HT 1306 Inserts
- Basic units of modular extended flute endmills with DIN69871 tapered shanks carrying T490 LNMT/HT 1306 tangentially clamped Inserts.
- Can be used with many extension options.
-
ae max for regular inserts, up to 0.10xD, ae max for -CS (chip splitting) inserts, up to 0.20xD.
-
Remove coolant plug screws (SR M6X..DIN916) prior to attaching extension units.
- Number of flutes.
- Number of inserts.
SKU: T490 LNK-INT50-FT Basic Units of Modular Extended Flute Endmills with DIN69871 Tapered Shanks Carrying T490 LNMT/HT 1306 Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNK-M-13 Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNK-M-13 Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts
- Extended flute and endmill with a FLEXFIT threaded adaptation carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 13 mm long cutting edges.
- ae max for regular inserts, up to 0.15xD, ae max for -CS and -FW (chip splitting) inserts, up to 0.20xD.
- Number of flutes.
- Number of inserts.
- Clamping wrench size.
SKU: T490 LNK-M-13 Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNM-08 Extended Flute Endmills Carrying T490 LNMT/HT 08… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNM-08 Extended Flute Endmills Carrying T490 LNMT/HT 08… Tangentially Clamped Inserts
- Extended flute endmills carrying T490 LNMT/HT 08… tangentially clamped inserts.
-
ae max for regular inserts, up to 0.25xD, ae max for -CS (chip splitting) inserts, up to 0.35xD.
- Number of flutes.
- Number of inserts.
- W-Weldon, C-Cylindrical.
SKU: T490 LNM-08 Extended Flute Endmills Carrying T490 LNMT/HT 08... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 LNM-M-08 Extended Flute Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 LNM-M-08 Extended Flute Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts
- Extended flute endmills with a FLEXFIT threaded adaptation carrying T490 LNMT/LNHT 08… tangentially clamped inserts with 4 helical, 8 mm long cutting edges.
- ae max for regular inserts, up to 0.15xD, ae max for -CS (chip splitting) inserts, up to 0.20xD.
- Number of flutes.
- Number of inserts.
- Clamping wrench size.
SKU: T490 LNM-M-08 Extended Flute Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 SM-08 Extended Flute Shell Mills Carrying T490 LNMT/HT 0804… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 SM-08 Extended Flute Shell Mills Carrying T490 LNMT/HT 0804… Tangentially Clamped Inserts
- Extended flute shell mills carrying T490 LNMT/HT 0804… tangentially clamped inserts (HELITANG T490 Line).
- ae max for regular inserts, up to 0.25xD, ae max for -CS (chip splitting) inserts, up to 0.30xD.
- Number of flutes.
- Number of inserts.
SKU: T490 SM-08 Extended Flute Shell Mills Carrying T490 LNMT/HT 0804... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 SM-11 Extended Flute Shell Mills Carrying T490 LN#T 11… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 SM-11 Extended Flute Shell Mills Carrying T490 LN#T 11… Tangentially Clamped Inserts
- Extended flute shell mills carrying T490 LN#T 11… tangentially clamped inserts.
- Radial W.O.C. < 0.35xD.
- Important: Maximum clamping torque 3.2 N*m.
- Number of flutes.
- Number of inserts.
SKU: T490 SM-11 Extended Flute Shell Mills Carrying T490 LN#T 11... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 SM-13 Extended Flute Shell Mills Carrying T490 LNMT/HT 1306… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 SM-13 Extended Flute Shell Mills Carrying T490 LNMT/HT 1306… Tangentially Clamped Inserts
- Extended flute shell mills carrying T490 LNMT/HT 1306… tangentially clamped inserts (HELITANG T490 Line).
- ae max for regular inserts, up to 0.25xD.
- ae max for -CS (chip splitting) inserts, up to 0.35xD.
- Can be applied for full slot applications.
- Number of flutes.
- Number of inserts.
SKU: T490 SM-13 Extended Flute Shell Mills Carrying T490 LNMT/HT 1306... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 SM-13FT Basic Units for Modular Extended Flute Shell Mills
Indexable Tools, Milling Tools, Shoulder milling toolsT490 SM-13FT Basic Units for Modular Extended Flute Shell Mills
- Basic units for modular extended flute shell mills with T490 LNMT/HT 1306… tangentially clamped inserts (HELITANG T490 Line).
- ae max for regular inserts, up to 0.25xD.
- ae max for -CS (chip splitting) inserts, up to 0.35xD.
- Number of flutes.
- Number of inserts.
SKU: T490 SM-13FT Basic Units for Modular Extended Flute Shell Mills -
Indexable Tools, Milling Tools, Shoulder milling tools
T490 SM-16 Extended Flute Shell Mills Carrying T490 LNMT/HT 1607… Tangentially Clamped Inserts
Indexable Tools, Milling Tools, Shoulder milling toolsT490 SM-16 Extended Flute Shell Mills Carrying T490 LNMT/HT 1607… Tangentially Clamped Inserts
- Extended Flute Shell Mills Carrying T490 LNMT/HT 1607… Tangentially Clamped Inserts.
- Number of flutes.
- Number of inserts.
SKU: T490 SM-16 Extended Flute Shell Mills Carrying T490 LNMT/HT 1607... Tangentially Clamped Inserts -
Indexable Tools, Milling Tools, Shoulder milling tools
TJU C12 12 130 1T Indexable end mill Shoulder Cutter For Milling Machine 1Flute of cnc lathe turning tools without blade
Indexable Tools, Milling Tools, Shoulder milling toolsTJU C12 12 130 1T Indexable end mill Shoulder Cutter For Milling Machine 1Flute of cnc lathe turning tools without blade
- TJU C12 12 130 1T Indexable end mill Shoulder Cutter For Milling Machine 1Flute of cnc lathe turning tools without blade.
SKU: 33051584331 -
Indexable Tools, Milling Tools, Shoulder milling tools
TJU C16 16 120 C16 17 120 2T end mill Shoulder Cutter For Milling Machine 2Flute of cnc lathe turning tools without blade
Indexable Tools, Milling Tools, Shoulder milling toolsTJU C16 16 120 C16 17 120 2T end mill Shoulder Cutter For Milling Machine 2Flute of cnc lathe turning tools without blade
- TJU C16 16 120 C16 17 120 2T end mill Shoulder Cutter For Milling Machine 2Flute of cnc lathe turning tools without blade.
SKU: 33054458312