Milling Tools
Showing 811–840 of 1440 results
-
Face milling, Indexable Tools, Milling Tools
KM-45 Face Milling Cutter Bar
- It is used for vertical milling machine, end milling machine, gantry milling machine and upper processing plane.
- There are cutter teeth on the end face and circumference, and there are also coarse teeth and fine teeth.
- Three side edge milling cutter: it is used to process all kinds of groove and step surface. There are cutter teeth on both sides and circumference.
SKU: KM-45 Face Milling Cutter Bar -
Face milling, Indexable Tools, Milling Tools
KM-45° Face Milling Cutter
- Suitable for steel parts, castings, aluminum parts, a variety of material blade, suitable for a wide range.
- Large chip holding space, good chip removal.
- It can be done with a flat milling finish.
- Large front angle, small cutting load.
SKU: KM-45° Face Milling Cutter -
Face milling, Indexable Tools, Milling Tools
KM12 45 Angle 4Flute Face Aluminium Plane Head End Mill Milling Cutter for SEKT1204 Insert CNC Machine High Hardness Tools
Face milling, Indexable Tools, Milling ToolsKM12 45 Angle 4Flute Face Aluminium Plane Head End Mill Milling Cutter for SEKT1204 Insert CNC Machine High Hardness Tools
- KM12 45 Angle 4Flute Face Aluminium Plane Head End Mill Milling Cutter for SEKT1204 Insert CNC Machine High Hardness Tools.
SKU: 33051286731 -
Indexable Tools, Milling Inserts, Milling Tools
KNUX160405R-11 CNC Turning Tools Carbide Inserts Lathe Cutter Cutting Tool Parts For Stainless Steel
Indexable Tools, Milling Inserts, Milling ToolsKNUX160405R-11 CNC Turning Tools Carbide Inserts Lathe Cutter Cutting Tool Parts For Stainless Steel
- LF6018: Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel, and also suitable for cutting heat-resistant alloy steel at low speeds.
SKU: 1005001975262147 -
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling tools
LN 15 Side and Face Milling Cutter (No.1)
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling toolsLN 15 Side and Face Milling Cutter (No.1)
- Side and face milling cutter is a standard machine tool.
- All three cutting edges have back angles, which are sharp and easy to cut.
SKU: LN 15 Side and Face Milling Cutter (No.1) -
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling tools
LN 15 Side and Face Milling Cutter (No.2)
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling toolsLN 15 Side and Face Milling Cutter (No.2)
- Side and face milling cutter is a standard machine tool.
- All three cutting edges have back angles, which are sharp and easy to cut.
SKU: LN 15 Side and Face Milling Cutter (No.2) -
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling tools
LN11 Side and Face Milling Cutter (No.1)
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling toolsLN11 Side and Face Milling Cutter (No.1)
- Side and face milling cutter is a standard machine tool.
- All three cutting edges have back angles, which are sharp and easy to cut.
SKU: LN11 Side and Face Milling Cutter (No.1) -
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling tools
LN11 Side and Face Milling Cutter (No.2)
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling toolsLN11 Side and Face Milling Cutter (No.2)
- Side and face milling cutter is a standard machine tool.
- All three cutting edges have back angles, which are sharp and easy to cut.
SKU: LN11 Side and Face Milling Cutter (No.2) -
Indexable Tools, Milling Inserts, Milling Tools
LNAR 1106 (PCD) Milling Inserts
- TANGMILL tangentially clamped milling inserts with a positive rake brazed PCD tips, used for machining aluminum.
- ID 5 for aluminum with up to 12% silicon and ID8 for higher silicon contents.
SKU: LNAR 1106 (PCD) Milling Inserts -
-
Indexable Tools, Milling Inserts, Milling Tools
LNAR 1106PN-R-S-W (PCD) Milling Inserts
- TANGMILL tangentially clamped, wiper milling inserts with a positive rake ID5 PCD tips, used for machining aluminum.
- The insert has a frontal radius and sharp cutting edge.
- It provides a uniform clean-cut edge and excellent surface finish.
SKU: LNAR 1106PN-R-S-W (PCD) Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
LNAR 1506 PN-N-P Milling Inserts
- Tangentially clamped inserts with positive polished land and a sharp cutting edge.
- Recommended for machining high silicon aluminum.
- 4 R.H. and 4 L.H. cutting edges when used on F90LN.. cutters.
SKU: LNAR 1506 PN-N-P Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
LNAR 1506 PN-R-S (PCD) Milling Inserts
- TANGMILL tangentially clamped milling inserts with a positive rake and brazed PCD tips.
- Used for machining aluminum.
- Grade ID5 for aluminum with up to 12% silicon and ID8 for higher silicon contents.
SKU: LNAR 1506 PN-R-S (PCD) Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
LNAT 1106-W Milling Inserts
- Tangentially clamped wiper inserts. 2 R.H. and 2 L.H. cutting edges.
- Use only one wiper insert when feed per revolution is less than 4 mm.
- When feed per revolution is less than 4 mm it is recommended to use only one wiper insert.
- When feed per revolution is greater than 4 mm, it is recommended to use two wiper inserts.
SKU: LNAT 1106-W Milling Inserts -
-
-
Indexable Tools, Milling Inserts, Milling Tools
LNAT 1506AN-W Milling Inserts
- Tangentially clamped wiper inserts. Designed for 45° lead angle on F45LN cutters.
- It has one right-hand and one left-hand wiper.
- When feed per revolution is less than 7 mm use only one wiper insert.
SKU: LNAT 1506AN-W Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
LNAT 1506PN-W Milling Inserts
- TANGMILL tangentially clamped wiper inserts.
- Wiper insert with two right- and two left-hand wipers for 90° lead angle in F90LN cutters
- When feed per revolution is less than 4 mm, it is recommended to use only one wiper insert.
- For feed per revolution greater than 4 mm, use two wiper inserts.
SKU: LNAT 1506PN-W Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
LNAW-11 (CBN) Milling Inserts
- TANGMILL inserts with a PCBN brazed tip.
- Use on F90LN milling cutters for machining hardened and cast steel with over 45 HRc, grey and nodular cast iron, powder compacted and sintered metals and heat resistant alloys.
SKU: LNAW-11 (CBN) Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
LNAW-15 (CBN) Milling Inserts
- TANGMILL inserts with a PCBN brazed tip.
- Use on F90LN milling cutters for machining hardened and cast steel with over 45 HRc, grey and nodular cast iron, powder compacted and sintered metals and heat resistant alloys.
SKU: LNAW-15 (CBN) Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
LNET 08..-TN-N Milling Inserts
- MINI-TANGSLOT Tangentially clamped inserts with 4 cutting edges for slotting and precision grooving cutters.
- The inserts have a chipformer that reduces the cutting forces and leaves a clean, undamaged surface.
- The insert has 2 right- and 2 left-hand cutting edges.
SKU: LNET 08..-TN-N Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
LNET 12-TN Milling Inserts
- TANGSLOT Tangentially clamped inserts with 4 cutting edges for slotting and precision grooving cutters.
- The inserts have a chipformer that reduces the cutting forces and leaves a clean, undamaged surface.
SKU: LNET 12-TN Milling Inserts