High-feed milling
Showing 1–30 of 36 results
-
Copy milling, contouring, Cut off, slot and groove milling, High-feed milling, Indexable Tools, Milling Tools
4, 6 Flute Solid Carbide Heads MM EFF
Copy milling, contouring, Cut off, slot and groove milling, High-feed milling, Indexable Tools, Milling Tools4, 6 Flute Solid Carbide Heads MM EFF
- Interchangeable solid carbide FEEDMILL heads with 4 or 6 flute, for milling at very high feed and small D.O.C.
- Do not apply lubricant to the threaded connection.
SKU: 4, 6 Flute Solid Carbide Heads MM EFF -
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90SO-04 Milling Tools
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90SO-04 Milling Tools
- Endmills carrying 2 insert geometries, square inserts for 90° shouldering, square inserts for fast feed milling applications.
- Tightening torque 0.5 Nxm.
- C-Cylindrical.
- Number of inserts.
- Maximum ramping angle – valid only with SOMT 040208 PNR-FF insert.
SKU: E90SO-04 Milling Tools -
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90SO-MM-04 Milling Tools
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90SO-MM-04 Milling Tools
- Endmills with a MULTI-MASTER threaded connection carrying 2 insert geometries.
- Square inserts for 90° shouldering, square inserts for fast feed milling applications.
- Tightening torque 0.5 Nxm.
SKU: E90SO-MM-04 Milling Tools -
Face milling, High-feed milling, Milling Tools
FF EW Fast Feed Endmills with FF WOMT… Inserts
- Fast Feed Endmills with FF WOMT… Inserts.
- Cutting diameter maximum.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- Maximum ramping angle.
- Insert tightening torque.
- Master insert identification.
SKU: FF EW Fast Feed Endmills with FF WOMT... Inserts -
Face milling, High-feed milling, Indexable Tools, Milling Tools
FF EW-CF Fast Feed Endmills with CLICKFIT Shanks
Face milling, High-feed milling, Indexable Tools, Milling ToolsFF EW-CF Fast Feed Endmills with CLICKFIT Shanks
- Fast Feed Endmills with CLICKFIT Shanks.
- Cutting diameter maximum.
- Number of inserts.
- Maximum ramping angle.
- Insert tightening torque.
- Master insert identification.
SKU: FF EW-CF Fast Feed Endmills with CLICKFIT Shanks -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FF EW-M Fast Feed Endmills with FLEXFIT Threaded Adaptation
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFF EW-M Fast Feed Endmills with FLEXFIT Threaded Adaptation
- Fast Feed Endmills with FLEXFIT Threaded Adaptation.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: FF EW-M Fast Feed Endmills with FLEXFIT Threaded Adaptation -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FF EWX Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFF EWX Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges
- Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
- Cutting diameter maximum.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- Maximum ramping angle.
- Master insert identification.
- Recommended tightening torque (N*m) for insert screw.
SKU: FF EWX Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FF EWX-M Fast Feed Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFF EWX-M Fast Feed Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges
- Fast Feed Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
- Cutting diameter maximum.
- Number of inserts.
- Maximum ramping angle.
- Clamping wrench size.
- Master insert identification.
- Recommended tightening torque (N*m) for insert screw.
SKU: FF EWX-M Fast Feed Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FF EWX-MM Fast Feed Endmills with MULTIMASTER Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFF EWX-MM Fast Feed Endmills with MULTIMASTER Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges
- Fast Feed Endmills with MULTI-MASTER Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- To generate a straight surface without cusps, the width of cut must not exceed DC.
SKU: FF EWX-MM Fast Feed Endmills with MULTIMASTER Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FF FWX Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFF FWX Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges
- Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
- Cutting diameter maximum.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
- Master insert identification.
- Recommended tightening torque (N*m) for insert screw.
SKU: FF FWX Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges -
Face milling, High-feed milling, Indexable Tools, Milling Tools
FF NM Fast Feed Face Mills Carrying Octagonal ONHU/MU 0806… Inserts with 16 Cutting Edges
Face milling, High-feed milling, Indexable Tools, Milling ToolsFF NM Fast Feed Face Mills Carrying Octagonal ONHU/MU 0806… Inserts with 16 Cutting Edges
- Fast Feed Face Mills Carrying Octagonal ONHU/MU 0806… Inserts with 16 Cutting Edges.
- Cutting diameter maximum.
- Number of inserts.
- Radius for programming.
- Master insert identification.
SKU: FF NM Fast Feed Face Mills Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges -
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FF SOF Multifunction Fast Feed Milling Cutter for Octagonal and Square Insert Contours with Various Entry Angles
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFF SOF Multifunction Fast Feed Milling Cutter for Octagonal and Square Insert Contours with Various Entry Angles
- Fast feed milling cutter, carrying square or octagonal double-sided inserts with 8/16 cutting edges.
- A- with ONMU 0505… insert.
- B- with S845 SNMU 1305… insert.
- C- with OXMT 0507R08-FF insert.
- Use only Torx Plus keys.
- Number of inserts.
- Master insert identification.
SKU: FF SOF Multifunction Fast Feed Milling Cutter for Octagonal and Square Insert Contours with Various Entry Angles -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFQ4 D-09 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFQ4 D-09 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
- Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges.
-
Radius for programming 2.5 mm.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
-
For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%.
SKU: FFQ4 D-09 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFQ4 D-12 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFQ4 D-12 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
- Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges.
- Radius for programming 3.1 mm.
- To generate a straight surface without cusps, the width of cut must not exceed DC.
- For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%.
SKU: FFQ4 D-12 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFQ4 D-17 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFQ4 D-17 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
- Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges.
-
Radius for programming 5.5 mm.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
-
For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%.
SKU: FFQ4 D-17 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFQ4 D-M-09 Fast Feed Endmills with FLEXFIT Threaded Adaptation Carrying Single-Sided Inserts with 4 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFQ4 D-M-09 Fast Feed Endmills with FLEXFIT Threaded Adaptation Carrying Single-Sided Inserts with 4 Cutting Edges
- Fast Feed Endmills with FLEXFIT Threaded Adaptation Carrying Single-Sided Inserts with 4 Cutting Edges.
- Radius for programming 2.5 mm.
- To generate a straight surface without cusps, the width of cut must not exceed DC.
- For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%.
SKU: FFQ4 D-M-09 Fast Feed Endmills with FLEXFIT Threaded Adaptation Carrying Single-Sided Inserts with 4 Cutting Edges -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFQ4 D-W-09 Fast Feed Endmills Carrying Single-Sided Inserts with 4 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFQ4 D-W-09 Fast Feed Endmills Carrying Single-Sided Inserts with 4 Cutting Edges
- Fast Feed Endmills Carrying Single-Sided Inserts with 4 Cutting Edges.
- Radius for programming 2.5 mm.
- To generate a straight surface without cusps, the width of cut must not exceed DC.
- For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%.
SKU: FFQ4 D-W-09 Fast Feed Endmills Carrying Single-Sided Inserts with 4 Cutting Edges -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFT3 EFM-02 Small Diameter Endmills Carrying Single-Sided Triangular Inserts for Fast Feed Milling
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFT3 EFM-02 Small Diameter Endmills Carrying Single-Sided Triangular Inserts for Fast Feed Milling
- Small Diameter Endmills Carrying Single-Sided Triangular Inserts for Fast Feed Milling.
- Radius for programming 1.1 mm.
- To generate a straight surface without cusps, the width of cut must not exceed DC.
SKU: FFT3 EFM-02 Small Diameter Endmills Carrying Single-Sided Triangular Inserts for Fast Feed Milling -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFT3 EFM-03 Endmills Carrying Single- Sided Small Trigon Inserts for Fast Feed Milling
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFT3 EFM-03 Endmills Carrying Single- Sided Small Trigon Inserts for Fast Feed Milling
- Endmills Carrying Single-Sided Small Trigon Inserts for Fast Feed Milling.
-
Radius for programming 1.1 mm.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
SKU: FFT3 EFM-03 Endmills Carrying Single- Sided Small Trigon Inserts for Fast Feed Milling -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFT3 EFM-MM 02 Small Diameter Endmills with a MULTI-MASTER Threaded Adaptation Carrying Triangular Inserts for Fast Feed Milling
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFT3 EFM-MM 02 Small Diameter Endmills with a MULTI-MASTER Threaded Adaptation Carrying Triangular Inserts for Fast Feed Milling
- Small Diameter Endmills with a MULTI-MASTER Threaded Adaptation Carrying Triangular Inserts for Fast Feed Milling.
-
Radius for programing 1.1 mm .
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
SKU: FFT3 EFM-MM 02 Small Diameter Endmills with a MULTI-MASTER Threaded Adaptation Carrying Triangular Inserts for Fast Feed Milling -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFT3 EFM-MM 03 Endmills with a MULTI-MASTER Threaded Adaptation Carrying Single-Sided Small Trigon Inserts for Fast Feed Milling
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFT3 EFM-MM 03 Endmills with a MULTI-MASTER Threaded Adaptation Carrying Single-Sided Small Trigon Inserts for Fast Feed Milling
- Endmills with a MULTI-MASTER Threaded Adaptation Carrying Single-Sided Small Trigon Inserts for Fast Feed Milling.
- Radius for programming 1.1 mm.
- To generate a straight surface without cusps, the width of cut must not exceed DC.
SKU: FFT3 EFM-MM 03 Endmills with a MULTI-MASTER Threaded Adaptation Carrying Single-Sided Small Trigon Inserts for Fast Feed Milling -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFV-D-R-VN07 Fast Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFV-D-R-VN07 Fast Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges
- Fast Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges.
-
Radius for programming 2.8 mm.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
SKU: FFV-D-R-VN07 Fast Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFX4 ED Endmills Carrying Small Double-Sided “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFX4 ED Endmills Carrying Small Double-Sided “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling
- Endmills Carrying Small Double-Sided “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
- Radius for programming 1.8 mm.
SKU: FFX4 ED Endmills Carrying Small Double-Sided "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFX4 ED-M Endmills with FLEXFIT Adaptation Carrying Small “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFX4 ED-M Endmills with FLEXFIT Adaptation Carrying Small “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling
- Endmills with FLEXFIT Adaptation Carrying Small “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling.
-
To generate a straight surface without cusps, the width of cut must not exceedDC .
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Applyappropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
SKU: FFX4 ED-M Endmills with FLEXFIT Adaptation Carrying Small "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFX4 ED-MM Endmills with MULTI-MASTER Adaptation Carrying Small “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFX4 ED-MM Endmills with MULTI-MASTER Adaptation Carrying Small “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling
- Endmills with MULTI-MASTER Adaptation Carrying Small “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling.
- To generate a straight surface without cusps, the width of cut must not exceed DC.
- Radius for programming 1.8 mm.
SKU: FFX4 ED-MM Endmills with MULTI-MASTER Adaptation Carrying Small "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
FFX4 FD Face Mills Carrying Small “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsFFX4 FD Face Mills Carrying Small “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling
- Face Mills Carrying Small “Bone Shape” Inserts with 4 Cutting Edges for Fast Feed Milling.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
- Radius for programming 1.8 mm.
SKU: FFX4 FD Face Mills Carrying Small "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling -
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
HOF-R07 Face Mills Carrying Octagonal Round and Fast Feed Segmented Radius Inserts
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsHOF-R07 Face Mills Carrying Octagonal Round and Fast Feed Segmented Radius Inserts
- Face mills carrying octagonal round and fast feed segmented radius inserts.
-
Helical interpolation is applicable up to and including 100 mm diameter.
- ap change according to insert.
- Cutting diameter maximum.
- Maximum ramping angle with OF..07.. inserts.
- Dimensions with RF.. 1905 round inserts.
- Dimensions with OFMW FF inserts.
- Number of inserts.
SKU: HOF-R07 Face Mills Carrying Octagonal Round and Fast Feed Segmented Radius Inserts -
Copy milling, contouring, Cut off, slot and groove milling, High-feed milling, Indexable Tools, Milling Tools
Interchangeable 2 Flute FEEDMILL Solid Carbide Heads MM FF
Copy milling, contouring, Cut off, slot and groove milling, High-feed milling, Indexable Tools, Milling ToolsInterchangeable 2 Flute FEEDMILL Solid Carbide Heads MM FF
- Interchangeable 2 flute FEEDMILL solid carbide heads for milling at very high feeds and small D.O.C.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Radius for programming.
- Maximum ramping angle.
SKU: Interchangeable 2 Flute FEEDMILL Solid Carbide Heads MM FF -
Face milling, High-feed milling, Indexable Tools, Milling Tools
MF EWX Moderate Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges
Face milling, High-feed milling, Indexable Tools, Milling ToolsMF EWX Moderate Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges
- Moderate Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
- Cutting diameter maximum.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- Maximum ramping angle.
- Master insert identification.
- Recommended tightening torque (N*m) for insert screw.
SKU: MF EWX Moderate Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges