Cut off, slot and groove milling
Showing 91–120 of 205 results
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HCE Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHCE Milling Tools
- Multifunction endmills that can carry ball nose, 90° and toroidal inserts.
- For undercutting, use HTR inserts only.
- The dimensions are for HCC inserts with RE=0.5 mm.
- C-Cylindrical.
SKU: HCE Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HCE-MM Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHCE-MM Milling Tools
- BALLPLUS, multifunction endmills with a MULTI-MASTER threaded adaptation that can carry ball nose, 90° and toroidal inserts.
-
For undercutting, use HTR inserts only.
-
The dimensions are for HCC inserts with re=0.5 mm.
-
Do not apply lubricant to the MULTI-MASTER threaded connection.
- Width across flats (wrench should be ordered separately).
SKU: HCE-MM Milling Tools -
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools
Helical end mills with interchangeable heads HMP01 EC
Cut off, slot and groove milling, Indexable Tools, Milling ToolsHelical end mills with interchangeable heads HMP01 EC
- Diameter range Ø40、Ø80.
- Coarse and differential pitch, less vibration.
- Holistic structure with good rigidity, interchangeable heads achieve high economical efficiency.
SKU: Helical end mills with interchangeable heads HMP01 EC -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM390 ETC-07 Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM390 ETC-07 Milling Tools
- 90° endmills carrying HM390 TCKT 0703 triangular inserts with 3 helical cutting edges.
- Insert clamping screw must be lubricated every indexing.
- Tightening torque 0.9 Nxm.
SKU: HM390 ETC-07 Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM390 ETC-MM Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM390 ETC-MM Milling Tools
- 90° endmills with a MULTI-MASTER threaded adaptation carrying HM390 TCKT 0703 triangular inserts with 3 helical cutting edges.
- Insert clamping screw must be lubricated every indexing.
- Tightening torque 0.9 Nxm.
SKU: HM390 ETC-MM Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM390 ETD-M Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM390 ETD-M Milling Tools
- 90° endmills with a FLEXFIT threaded adaptation carrying HM390 TDKT 1505 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- Clamping wrench size.
- Maximum ramping angle.
SKU: HM390 ETD-M Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM390 ETP-04 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM390 ETP-04 Milling Tools
- 90° small diameter endmills carrying HM390 TPKR 0401 triangular inserts with 3 helical cutting edges.
- Tightening torque 0.5 Nxm.
- Number of inserts.
- C-Cylindrical.
- Maximum ramping angle.
SKU: HM390 ETP-04 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM390 ETP-05 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM390 ETP-05 Milling Tools
- 90° endmills carrying HM390 TPKT 0502 triangular inserts with 3 helical cutting edges.
- Tightening torque 0.5 N*m.
- Number of inserts.
- C-Cylindrical.
- Maximum ramping angle.
SKU: HM390 ETP-05 Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM390 ETP-C#-10 Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM390 ETP-C#-10 Milling Tools
- 90° endmills with CAMFIX (ISO 26623-1 standard) tapered shanks, carrying HM390 TPKT 1003 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
SKU: HM390 ETP-C#-10 Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM390 ETP-M Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM390 ETP-M Milling Tools
- 90° endmills with a FLEXFIT threaded adaptation carrying HM390 TPKT 1003 triangular inserts with 3 helical cutting edges.
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Apply appropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
SKU: HM390 ETP-M Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM390 ETP-MM-04 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM390 ETP-MM-04 Milling Tools
- 90° endmills with a MULTI-MASTER threaded adaptation carrying HM390 TPKR 0401… triangular inserts with helical cutting edges.
- Insert tightening torque 0.5 N*m.
- Number of inserts.
- Clamping wrench size.
- Maximum ramping angle.
SKU: HM390 ETP-MM-04 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM390 ETP-MM-05 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM390 ETP-MM-05 Milling Tools
- 90° endmills with a MULTI-MASTER threaded adaptation carrying HM390 TPKT 0502… triangular inserts with helical cutting edges.
- Insert tightening torque 0.5 N*m .
- Number of inserts.
- Clamping wrench size.
- Maximum ramping angle.
SKU: HM390 ETP-MM-05 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 E90A-10 Endmills (continued) Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 E90A-10 Endmills (continued) Milling Tools
- Endmills carrying HM90 AP.. 1003… inserts.
- Number of inserts.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
- 0 – Without coolant supply, 1 – With coolant supply.
- Maximum RPM.
SKU: HM90 E90A-10 Endmills (continued) Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 E90A-10 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 E90A-10 Milling Tools
- Endmills carrying HM90 AP.. 1003… inserts.
- Number of inserts.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
- 0 – Without coolant supply, 1 – With coolant supply.
- Maximum RPM.
SKU: HM90 E90A-10 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 E90A-M-10 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 E90A-M-10 Milling Tools
- HELI2000 90° endmills with a FLEXFIT threaded adaptation carrying HM90 AP.. 1003… inserts.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter
SKU: HM90 E90A-M-10 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 E90A-MM-10 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 E90A-MM-10 Milling Tools
- HELI2000 90° endmills with a MULTI-MASTER threaded adaptation carrying HM90 AP.. 1003… inserts.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- Number of inserts.
- Maximum ramping angle.
- Clamping wrench size.
SKU: HM90 E90A-MM-10 Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 E90AD-15 Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 E90AD-15 Milling Tools
- 90° endmills carrying HM90 ADKT-1505… inserts.
- Number of inserts.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: HM90 E90AD-15 Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 E90AD-M-15 Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 E90AD-M-15 Milling Tools
- 90° endmills with a FLEXFIT threaded adaptation carrying HM90 ADKT-1505… inserts.
-
Thinner insert ADM. 1503.. mounted on TSP-15R seat.
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Apply appropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
SKU: HM90 E90AD-M-15 Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 EAL-16 Long Reach Endmills Carrying HM90 APCR 1605 Inserts for Machining Aluminum
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 EAL-16 Long Reach Endmills Carrying HM90 APCR 1605 Inserts for Machining Aluminum
- Long Reach Endmills Carrying HM90 APCR 1605 Inserts for Machining Aluminum.
- Insert tightening torque: 600 Nxcm.
- HM90 APCR 1605..R-P inserts with corner radii 3.2 and 4.0 mm require pocket modification, corners larger than 4.5 mm should be used only on BR tools.
SKU: HM90 EAL-16 Long Reach Endmills Carrying HM90 APCR 1605 Inserts for Machining Aluminum -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HM90 EAL-HSK63A-16 Long Reach Endmills with Integral HSK Adaptation Carrying HM90 APCR 1605… Inserts for Machining Aluminum
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHM90 EAL-HSK63A-16 Long Reach Endmills with Integral HSK Adaptation Carrying HM90 APCR 1605… Inserts for Machining Aluminum
- Long Reach Endmills with Integral HSK Adaptation Carrying HM90 APCR 1605… Inserts for Machining Aluminum.
- Insert tightening torque: 600 Nxcm.
- HM90 APCR 1605..R-P inserts with corner radii 3.2 and 4.0 mm require pocket modification, corners larger than 4.5 mm should be used only on BR tools.
- A cooling tube must be used with all internal coolant HSK spindles (should be ordered separately).
SKU: HM90 EAL-HSK63A-16 Long Reach Endmills with Integral HSK Adaptation Carrying HM90 APCR 1605... Inserts for Machining Aluminum -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
HP ANK-07 Extended Flute Endmills Carrying HP ANK-07… Inserts
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsHP ANK-07 Extended Flute Endmills Carrying HP ANK-07… Inserts
- Extended flute endmills carrying HELIPLUS HP ANK-07… inserts.
- Number of flutes.
- Number of inserts.
- W-Weldon.
SKU: HP ANK-07 Extended Flute Endmills Carrying HP ANK-07... Inserts -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HP E90AN-07 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHP E90AN-07 Milling Tools
- Endmills using HELIPLUS HP ANKT 0702.. inserts.
- Extra fine pitch endmills with very tight tool and insert tolerances for high production rates.
- Very strong and durable insert.
- Available are tools with and without coolant holes.
- Insert tightening torque: 62 Nxcm.
SKU: HP E90AN-07 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HP E90AN-M-07 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHP E90AN-M-07 Milling Tools
- 90° endmills with a FLEXFIT threaded adaptation carrying HELIPLUS HP ANKT 0702.. inserts.
- Insert tightening torque: 62 Nxcm.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: HP E90AN-M-07 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HP E90AN-MM-07 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHP E90AN-MM-07 Milling Tools
- 90° endmills with a MULTI-MASTER threaded adaptation carrying HELIPLUS HP ANKT 0702.. inserts.
- Do not apply lubricant to the MULTI-MASTER threaded connection .
- Number of inserts.
- Clamping wrench size.
- Maximum ramping angle.
- Values only for HP ANKT 0702R12T-FF insert.
SKU: HP E90AN-MM-07 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HP E90AT-19 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHP E90AT-19 Milling Tools
- 90° endmills carrying HP AD.. 1906.. inserts with 18 mm long and helical cutting edges.
- First loosely attach the inner clamping screw, then the outer one.
- In the same order tighten them both.
SKU: HP E90AT-19 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HSM90S EAL-14 Long Reach Endmills Carrying HSM90S APCR 1405… Inserts for Machining Aluminum
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHSM90S EAL-14 Long Reach Endmills Carrying HSM90S APCR 1405… Inserts for Machining Aluminum
- Long Reach Endmills Carrying HSM90S APCR 1405… Inserts for Machining Aluminum.
-
Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screw.
-
Insert tightening torque: 6 (Nxm).
- Number of inserts.
- Maximum RPM.
- Maximum ramping angle.
SKU: HSM90S EAL-14 Long Reach Endmills Carrying HSM90S APCR 1405... Inserts for Machining Aluminum -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
HSM90S FAL-14 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsHSM90S FAL-14 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds
- 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds.
-
Important: When machining at very high cutting speeds and the insert needs replacing, it is also recommended to replace the screw.
-
Insert tightening torque: 6 (Nxm).
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: HSM90S FAL-14 90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds