Cut off, slot and groove milling
Showing 61–90 of 205 results
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools
FDN-LN12 Full Slot Cutters Carrying LNET 12… Tangentially Mounted Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsFDN-LN12 Full Slot Cutters Carrying LNET 12… Tangentially Mounted Inserts
- Full Slot Cutters Carrying LNET 12… Tangentially Mounted Inserts.
-
Slot width depends on the selected insert width.
-
Each tool is supplied with screws for the thinnest specified insert.
-
Verify use of correct screw for the insert being used.
SKU: FDN-LN12 Full Slot Cutters Carrying LNET 12... Tangentially Mounted Inserts -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-XN13 Full Slot Flange Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-XN13 Full Slot Flange Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
- Full Slot Flange Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges.
- Number of inserts.
- Cutting depth maximum.
SKU: FDN-XN13 Full Slot Flange Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FULLCUT MILL FCM Type Arbor Type
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFULLCUT MILL FCM Type Arbor Type
- Compatible with the new-standard Face Mill Arbor type FMH.
- Exhibits incredible cutting capacity even with #40 machining centers or millturn machines.
SKU: FULLCUT MILL FCM Type Arbor Type -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
FULLCUT MILL FCM Type BBT Integrated Type Long Type
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsFULLCUT MILL FCM Type BBT Integrated Type Long Type
- Tough 7/24 taper shank integrated type.
- Equipped with DUAL CONTACT <BIG-PLUS> to further improve rigidity and precision!
SKU: FULLCUT MILL FCM Type BBT Integrated Type Long Type -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
FULLCUT MILL FCM Type BBT Integrated Type Standard Type
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsFULLCUT MILL FCM Type BBT Integrated Type Standard Type
- Tough 7/24 taper shank integrated type.
- Equipped with DUAL CONTACT <BIG-PLUS> to further improve rigidity and precision!
SKU: FULLCUT MILL FCM Type BBT Integrated Type Standard Type -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
FULLCUT MILL FCM Type BDV Integrated Type Standard Type
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsFULLCUT MILL FCM Type BDV Integrated Type Standard Type
- Tough 7/24 taper shank integrated type.
- Equipped with DUAL CONTACT <BIG-PLUS> to further improve rigidity and precision!
SKU: FULLCUT MILL FCM Type BDV Integrated Type Standard Type -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
FULLCUT MILL FCR Type BBT Integrated Type Long Type
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsFULLCUT MILL FCR Type BBT Integrated Type Long Type
- Integral design with a taper shank and dual face contact of BIG-PLUS and HSK provide the highest rigidity.
SKU: FULLCUT MILL FCR Type BBT Integrated Type Long Type -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
FULLCUT MILL FCR Type BBT Integrated Type Standard Type
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsFULLCUT MILL FCR Type BBT Integrated Type Standard Type
- Integral design with a taper shank and dual face contact of BIG-PLUS and HSK provide the highest rigidity.
SKU: FULLCUT MILL FCR Type BBT Integrated Type Standard Type -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
FULLCUT MILL FCR Type BDV Integrated Type Standard Type
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsFULLCUT MILL FCR Type BDV Integrated Type Standard Type
- Integral design with a taper shank and dual face contact of BIG-PLUS and HSK provide the highest rigidity.
SKU: FULLCUT MILL FCR Type BDV Integrated Type Standard Type -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
FULLCUT MILL FCR Type Cylindrical Shank Type Oversize
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsFULLCUT MILL FCR Type Cylindrical Shank Type Oversize
- Cutter diameter is 1mm larger than shank diameter, preventing workpiece interference. (except ST28)
SKU: FULLCUT MILL FCR Type Cylindrical Shank Type Oversize -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
GM-DG Slitting Cutters Carrying Self-Clamped Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsGM-DG Slitting Cutters Carrying Self-Clamped Inserts
- Slitting Cutters Carrying Self-Clamped Inserts.
- DHUB refers to SW/S drive shanks and R drive flange set .
- Maximum RPM may not be exceeded.
- Only one key slot.
- Minimum cutting width.
- Maximum cutting width.
- Number of inserts.
- Maximum RPM.
SKU: GM-DG Slitting Cutters Carrying Self-Clamped Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
GSHT Slitting Inserts for Specially Tailored Heavy Duty Slitting Cutters
Cut off, slot and groove milling, Indexable Tools, Milling ToolsGSHT Slitting Inserts for Specially Tailored Heavy Duty Slitting Cutters
- Slitting Inserts for Specially Tailored Heavy Duty Slitting Cutters.
- To be used in combination with GSHT regular inserts (6-8 mm) for half-effective cutter configuration Inserts.
SKU: GSHT Slitting Inserts for Specially Tailored Heavy Duty Slitting Cutters -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
H490 ANK-09C Extended Flute Endmills Carrying H490 ANKX 09… Double- Sided Rectangular Inserts with 4 Helical Cutting Edges
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsH490 ANK-09C Extended Flute Endmills Carrying H490 ANKX 09… Double- Sided Rectangular Inserts with 4 Helical Cutting Edges
- Extended flute endmills carryingH490 ANKX 09… double-sided rectangular inserts with 4 helical cutting edges.
- Used for heavy applications (HELIDO 490 Line).
- ae(max)=0.25xD.
- Number of flutes.
- Number of inserts.
- W-Weldon.
SKU: H490 ANK-09C Extended Flute Endmills Carrying H490 ANKX 09... Double- Sided Rectangular Inserts with 4 Helical Cutting Edges -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
H490 E90AX-09 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsH490 E90AX-09 Milling Tools
- 90° endmills carrying H490 ANKX 09… double-sided rectangular inserts with 4 helical cutting edges. Used for heavy applications.
- “B” Suffix cylindrical shank which may be shortened
- Number of inserts.
- C-Cylindrical, W-Weldon.
SKU: H490 E90AX-09 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
H490 E90AX-12 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsH490 E90AX-12 Milling Tools
- 90° endmills carrying H490 ANKX 12…double-sided rectangular inserts with 4 helical cutting edges.
- Maximum ramping angle – valid only when the H490 ANKX1205R 15T-FF insert is used.
- Number of inserts.
- C-Cylindrical, W-Weldon.
SKU: H490 E90AX-12 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
H690 E90AX-10 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsH690 E90AX-10 Milling Tools
- 90° endmills carrying H690 TNKX 1005..triangular inserts with 6 helical cutting edges.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- Maximum ramping angle.
SKU: H690 E90AX-10 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
H690 EWN Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsH690 EWN Milling Tools
- 90° endmills carrying H690 WNMU 0704 double-sided trigonal inserts with 6 helical cutting edges.
- Insert clamping screw must be lubricated every indexing.
- Tightening torque 0.9 Nxm.
- Number of inserts.
- W-Weldon.
- Maximum ramping angle.
SKU: H690 EWN Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
H690 FWN 90° Face Mills Carrying H690 WNMU 0705 Double- Sided Trigonal Inserts with 6 Helical Cutting Edges
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsH690 FWN 90° Face Mills Carrying H690 WNMU 0705 Double- Sided Trigonal Inserts with 6 Helical Cutting Edges
- 90° face mills carrying H690 WNMU 0705 double-sided trigonal inserts with 6 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
SKU: H690 FWN 90° Face Mills Carrying H690 WNMU 0705 Double- Sided Trigonal Inserts with 6 Helical Cutting Edges