Copy milling, contouring
Showing 61–70 of 70 results
-
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools
Interchangeable 6 Flute Torodial Solid Carbide Heads MM ETR
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling ToolsInterchangeable 6 Flute Torodial Solid Carbide Heads MM ETR
- Interchangeable 6 flute torodial solid carbide milling heads.
- Do not apply lubricant to the threaded connection.
- Cutting diameter maximum.
- Number of flutes.
- Maximum ramping angle.
SKU: Interchangeable 6 Flute Torodial Solid Carbide Heads MM ETR -
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools
MF FWX Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges
Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling ToolsMF FWX Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges
- Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges.
-
To generate a straight surface without cusps, the width of cut must not exceed DC.
- Cutting diameter maximum.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
- Master insert identification.
- Recommended tightening torque (N*m) for insert screw.
SKU: MF FWX Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges -
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools
MM HT Torodial 2 Flute Interchangeable Solid Carbide Heads MM HT
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling ToolsMM HT Torodial 2 Flute Interchangeable Solid Carbide Heads MM HT
- Interchangeable 2 flute torodial solid carbide milling heads.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Specially tailored radius range upon request.
SKU: MM HT Torodial 2 Flute Interchangeable Solid Carbide Heads MM HT -
Chamfer milling, Copy milling, contouring, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools
SOE45 8/16 Milling Tools
Chamfer milling, Copy milling, contouring, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling ToolsSOE45 8/16 Milling Tools
- Multifunctional endmills for octagonal, square and round insert contours with various entry angles.
- A- with ONMU 0505… insert.
- B- with S845 SNMU 1305… insert.
- C- with RXMT 1607N insert.
- D- with OXMT 0507R08-FF insert.
- E- with OXMT 050705-R-HP insert.
- Use only Torx Plus keys.
SKU: SOE45 8/16 Milling Tools -
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling Tools
SOF45 Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling ToolsSOF45 Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles
- Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles.
- 1- with ONMU 0505… insert.
- 2- with S845 SNMU 1305… insert.
- 3- with RXMT 1607N insert.
- 4- with OXMT 0507R08-FF insert.
- 5- with OXMT 050705-R-HP insert.
- Use only Torx Plus keys.
SKU: SOF45 Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles -
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling Tools
SOF45(continued) Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles
Chamfer milling, Copy milling, contouring, Face milling, Indexable Tools, Milling ToolsSOF45(continued) Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles
- Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles.
- 1- with ONMU 0505… insert.
- 2- with S845 SNMU 1305… insert.
- 3- with RXMT 1607N insert.
- 4- with OXMT 0507R08-FF insert.
- 5- with OXMT 050705-R-HP insert.
- Use only Torx Plus keys.
SKU: SOF45(continued) Multifunction Face Mills for Octagonal, Square and Round Insert Contours with Various Entry Angles -
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools
Solid Carbide Tapered Heads MM ET
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling toolsSolid Carbide Tapered Heads MM ET
- MULTI-MASTER interchangeable solid carbide tapered heads with 20/30° helix, variable pitch and central coolant holes for chatter free finishing operations.
- Used mainly for machining titanium and other heat resistant turbine blades.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Maximum ramping angle.
SKU: Solid Carbide Tapered Heads MM ET -
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
TR6 ER Multifunction Endmills that can Carry Four Different Insert Geometries
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsTR6 ER Multifunction Endmills that can Carry Four Different Insert Geometries
- Multifunction Endmills that can Carry Four Different Insert Geometries.
SKU: TR6 ER Multifunction Endmills that can Carry Four Different Insert Geometries -
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
TR6 ER-M Multifunction Endmills with FLEXFIT Threaded Adaptation that can Carry Four Different Insert Geometries
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsTR6 ER-M Multifunction Endmills with FLEXFIT Threaded Adaptation that can Carry Four Different Insert Geometries
- Multifunction Endmills with FLEXFIT Threaded Adaptation that can Carry Four Different Insert Geometries.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: TR6 ER-M Multifunction Endmills with FLEXFIT Threaded Adaptation that can Carry Four Different Insert Geometries -
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
TR6 FR Multifunction Face Mills that can Carry Four Different Insert Geometries
Chamfer milling, Copy milling, contouring, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsTR6 FR Multifunction Face Mills that can Carry Four Different Insert Geometries
- Multifunction Face Mills that can Carry Four Different Insert Geometries.
SKU: TR6 FR Multifunction Face Mills that can Carry Four Different Insert Geometries