Boring and Reaming Tools
Showing 211–240 of 258 results
-
Boring and Reaming Tools, Fine boring tools, Indexable Tools
NBH2084 Micro-boring Head
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°,for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: NBH2084 Micro-boring Head -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
NBH2084 Micro-Boring Tool Kit
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°,for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: NBH2084 Micro-Boring Tool Kit -
Boring and Reaming Tools, Indexable Tools, Rough boring tools
NLR Two-flute Rough Boring Tool With Bridge(SNL150-210)
Boring and Reaming Tools, Indexable Tools, Rough boring toolsNLR Two-flute Rough Boring Tool With Bridge(SNL150-210)
- It is suitable for the finish machining for the large diameter, complete ground guide slot, the boring range is Φ150-Φ210.
- There is special cartridge for it.
SKU: NLR Two-flute Rough Boring Tool With Bridge(SNL150-210) -
Boring and Reaming Tools, Indexable Tools, Rough boring tools
NLR Two-flute Rough Boring Tool With Bridge(SNL210-290)
Boring and Reaming Tools, Indexable Tools, Rough boring toolsNLR Two-flute Rough Boring Tool With Bridge(SNL210-290)
- It is suitable for the finish machining for the large diameter, complete ground guide slot, the boring is Φ210-Φ850.
- There is special cartridge for it.
SKU: NLR Two-flute Rough Boring Tool With Bridge (SNL210-290) -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
PICCO ACE-BH Holders with Short Shanks for ITS BORE System Carrying PICCOCUT Inserts
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable ToolsPICCO ACE-BH Holders with Short Shanks for ITS BORE System Carrying PICCOCUT Inserts
- Holders with Short Shanks for ITS BORE System Carrying PICCOCUT Inserts.
SKU: PICCO ACE-BH Holders with Short Shanks for ITS BORE System Carrying PICCOCUT Inserts -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
Precision Boring Tool for External turning
Boring and Reaming Tools, Fine boring tools, Indexable ToolsPrecision Boring Tool for External turning
- It is fine boring tool body with K connection, and the dial each of which is 0.01 mm on diameter, which can be adjusted freely and stably, but the tool should be rotated on the anticlockwise direction.
SKU: Precision Boring Tool for External turning -
-
Boring and Reaming Tools, Indexable Tools, Rough boring tools
Rough Boring Tool DRB
- Roughing is primarily focused on metal removal and is performed to open up an existing hole made by methods such as pre-machining, casting or forging.
- Rough boring prepares the hole for finishing.
- For optimized boring, general boring, large diameter- and lightweight boring see the selection of tools, presented below in the overview.
- To eliminate vibration when machining with long overhangs, damped tools are available.
SKU: Rough Boring Tool DRB -
Boring and Reaming Tools, Indexable Tools, Rough boring tools
Rough Boring Tool for External Turning
- Cartridge with rectangular slot guide. the cartridge move on the guide freely to reach the diameter.
- Note: Tool rotating anticlockwise when external turning.
SKU: Rough Boring Tool for External Turning -
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
Rough Boring Tool Insert Holder DZA/DZB
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable ToolsRough Boring Tool Insert Holder DZA/DZB
- Roughing is primarily focused on metal removal and is performed to open up an existing hole made by methods such as pre-machining, casting or forging.
- Rough boring prepares the hole for finishing.
- For optimized boring, general boring, large diameter- and lightweight boring see the selection of tools, presented below in the overview.
- To eliminate vibration when machining with long overhangs, damped tools are available.
SKU: Rough Boring Tool Insert Holder DZA/DZB -
Boring and Reaming Tools, Indexable Tools, Rough boring tools
Rough Boring Tool RB
- Roughing is primarily focused on metal removal and is performed to open up an existing hole made by methods such as pre-machining, casting or forging.
- Rough boring prepares the hole for finishing.
- For optimized boring, general boring, large diameter- and lightweight boring see the selection of tools, presented below in the overview.
- To eliminate vibration when machining with long overhangs, damped tools are available.
SKU: Rough Boring Tool RB -
Rough boring tools
RW BORING HEAD (for roughing)
-
Balance cutting allows powerful boring.
-
Axial adjustment mechanism achieves “perfect balance cutting”.
-
The “step cutting method” can reduce the number of passes in the applications with large stock allowance.
-
ROUGH BORING HEAD Pursuit of rigidity
-
Secure contact using a single wrench.
-
Supports various applications from rough to finish boring with abundant heads and accessories.
-
Safe structure at high torque
-
Rapid adaptation to special tools
SKU: RW BORING HEAD (for roughing) -
-
-
-
Boring and Reaming Tools, Indexable Tools, Rough boring tools
SB Fixed Rough Boring Tools
- The main function of the rough boring tool is to improve the working efficiency, so the strength of the tool should be high.
- It is used to remove the metal allowance of the workpiece, mainly reaming.
SKU: SB Fixed Rough Boring Tools -
-
Rough boring tools
SMART DAMPER SW BORING HEAD (For Roughing) PAT
-
SW rough boring head integrated with the Smart Damper.
-
ROUGH BORING HEAD Pursuit of rigidity
-
Secure contact using a single wrench.
-
Supports various applications from rough to finish boring with abundant heads and accessories.
-
Safe structure at high torque
-
Rapid adaptation to special tools
SKU: SMART DAMPER SW BORING HEAD (For Roughing) PAT. -