Slotting Cutter Adapters Categories
Slotting Cutter Adapters
Showing all 10 results
-
Clamping Technology, JIS (MAS 403) BT30/BT40/BT50, Slotting Cutter Adapters, Tool Holders
BT 2° Side Lock Holders
Clamping Technology, JIS (MAS 403) BT30/BT40/BT50, Slotting Cutter Adapters, Tool HoldersBT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Slotting Cutter Adapters, Tool Holders
Cylindrical Shanks MM TS-A-L..
- MULTI-MASTER cylindrical shanks for interchangeable milling heads.
-
Do not apply lubricant to the threaded connection.
- S-steel, C-carbide.
- The actual maximum RPM should be calculated by dividing the listed RPM max by the number of the head’s flutes being used.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: Cylindrical Shanks MM TS-A-L.. -
Clamping Technology, DIN 69871 SK30/SK40/SK50, Slotting Cutter Adapters, Tool Holders
JT Soltting Cutter Holders
Clamping Technology, DIN 69871 SK30/SK40/SK50, Slotting Cutter Adapters, Tool HoldersJT Soltting Cutter Holders
- Bore holes for data carriers according to DIN 69871.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: JT Soltting Cutter Holders -
Slotting Cutter Adapters, Tool Holders
MM CAB Adapters for Connecting FLEXFIT Shanks and MULTIMASTER Milling Heads
Slotting Cutter Adapters, Tool HoldersMM CAB Adapters for Connecting FLEXFIT Shanks and MULTIMASTER Milling Heads
- Adapters for connecting FLEXFIT shanks and MULTI-MASTER milling heads.
- Do not apply lubricant to the threaded connection .
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Apply appropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
-
Clamping wrench size.
SKU: MM CAB Adapters for Connecting FLEXFIT Shanks and MULTIMASTER Milling Heads -
-
Milling Tools, Slotting Cutter Adapters, Tool Holders
Solid Carbide Cylindrical Shanks MM GRT
- Solid carbide cylindrical shanks carrying slitting and grooving interchangeable milling heads.
- MM GRT… shanks serve mainly for MM GRIT… slitting heads.
- When mounting other types of milling heads, do not exceed maximum specified depth of cut for the particular milling head.
- Since the shank diameter is not relieved, it may touch a wall on the workpiece being machined.
- Use carbide shanks for groove milling heads and for applications requiring high rigidity and precision.
SKU: Solid Carbide Cylindrical Shanks MM GRT -
Clamping Technology, DIN 69893 HSK-A, HSK-E, HSK-F, Slotting Cutter Adapters, Tool Holders
Soltting Cutter Holders
Clamping Technology, DIN 69893 HSK-A, HSK-E, HSK-F, Slotting Cutter Adapters, Tool HoldersSoltting Cutter Holders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Soltting Cutter Holders -
-
Clamping Technology, DIN 69893 HSK-A, HSK-E, HSK-F, Slotting Cutter Adapters, Tool Holders
TMG21 Main Handle Module
Clamping Technology, DIN 69893 HSK-A, HSK-E, HSK-F, Slotting Cutter Adapters, Tool HoldersTMG21 Main Handle Module
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: TMG21 Main handle module