JIS (MAS 403) BT30/BT40/BT50
Showing all 23 results
-
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
ADJ BT-ER DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 ADB Tapered Shanks
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersADJ BT-ER DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 ADB Tapered Shanks
- DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 ADB Tapered Shanks.
SKU: ADJ BT-ER DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 ADB Tapered Shanks -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT30 ER Collet Chucks
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT30 ER Collet Chucks(Balanced)
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersBT30 ER Collet Chucks(Balanced)
- BT30 ER Collet Chucks(Balanced)
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks(Balanced) -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT40 ER Collet Chucks
- Tool holding device: BT40.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT40 ER Collet Chucks -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT50 ER Collet Chucks
- Tool holding device: BT50.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT50 ER Collet Chucks -
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder (CTA)
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder (CTA)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder (CTA) -
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder for high-speed (CTH)
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder for high-speed (CTH)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder for high-speed (CTH) -
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder A type (DTA)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder A type (DTA) -
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder E type (DTE)
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersDETa-1 Collet Holder E type (DTE)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder E type (DTE) -
-
-
Collet Chucks, DIN 69871 SK30/SK40/SK50, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Extension for ER Collect Chuck Adaptor
Collet Chucks, DIN 69871 SK30/SK40/SK50, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersExtension for ER Collect Chuck Adaptor
- Er collect chuck adaptor is a kind of numerical control tool holder, which is widely used.
- It is used for boring, milling, drilling, tapping, grinding and carving. It’s a kind of handle commonly used.
SKU: Extension for ER Collect Chuck Adaptor -
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
High Precision ER Collect Chuck Adaptor MAS403BT (No.1)
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersHigh Precision ER Collect Chuck Adaptor MAS403BT (No.1)
- The High Precision ER Collect chuck adaptor is a kind of tool, which is the connection between the mechanical spindle and the tool and other accessory tools.
SKU: High Precision ER Collect Chuck Adaptor MAS403BT (No.1) -
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
High Precision ER Collect Chuck Adaptor MAS403BT (No.2)
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersHigh Precision ER Collect Chuck Adaptor MAS403BT (No.2)
- The high precision ER collect chuck adaptor is a kind of tool, which is the connection between the mechanical spindle and the tool and other accessory tools.
SKU: High Precision ER Collect Chuck Adaptor MAS403BT (No.2) -